Used Injection Moulder for sale (2,451)

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed. Todsxhfycjpfx Af Tsf

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Retactable belt. Tedpowt Tnhefx Af Tsf Belt dimensions 700mm W x 29mm L

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Tjdsumn Duspfx Af Tsf

Condition: used, Moulder IDC000075 Tsdetwy T Rjpfx Af Tof - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation

Condition: excellent (used), Merand Baguette Machine in good working condition Tsdpfx Aekzh Ehof Tsf

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, screw diameter: 30 mm, injection pressure: 2,500 bar, opening stroke: 500 mm, plate length: 570 mm, TECHNICAL DETAILS Clamping force: 1,000 kN First injection unit Screw diameter: 30 mm Shot weight: 65 g Shot volume: 78 cm³ Injection pressure: 2,210 bar Second injection unit Screw diameter: 25 mm Shot weight: 45 g Shot volume: 54 cm³ Injection pressure: 2,500 bar Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Opening stroke: 500 mm Maximum daylight between platens: 850 mm Mold height: 350 mm Tedpfoxx T Dwjx Af Tef MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4.63 x 1.3 x 3.9 m Weight: 4,000 kg Connected load: 125 A EQUIPMENT 2 x core pull (simultaneous movement, adjustable holding pressure) Intermediate stop for hydraulic rotary control CF card drive Host computer interface Input device interface Conveyor belt interface Machine prepared for Multilift Selector unit with connection Installation height expanded to 350 mm Highly wear-resistant screws Connection for air blow-off device 2-color / horizontal-vertical injection unit Includes disks/CF cards – complete documentation/manuals

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Tjdpfx Asxyizhsf Tjf Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,291 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,595 bar, installation height: 300 mm, TECHNICAL DETAILS Clamping force: 1,200 kN Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 1,595 bar Platen size: 740 mm x 470 mm Minimum mold height: 300 mm Maximum platen distance: 800 mm Opening stroke: 507 mm MACHINE DETAILS Control system: CC100 Dimensions & Weight Machine dimensions (L x W x H): 4.35 m x 2.2 m x 2.1 m Todpfx Afjxzfl So Tef Total weight: 7,300 kg Operating hours: 64,291 h EQUIPMENT Screen language German & English CEE socket 16 A Hydraulic core pull 2x Handling unit Conveyor belt Safety enclosure Levelling elements EUROMAP 12 interface Interface for ejector plate monitoring Schuko socket 10 A

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Todpfx Afox Af S Uo Tsf Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Tedpfx Afsx Aphtj Tef Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen – 8-way water manifold – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32)

Year of construction: 2017, condition: used, machine/vehicle number: 21700430, Clamping force: 1,034 kN, heating plate dimensions: 700x500 mm, injection pressure: 1,500/2,000 bar, injection volume: 400 cm³, lightly used, the system must be professionally disconnected from the power supply. Tjdsx Akh Uepfx Af Tef

Condition: excellent (used), Year of construction: 2007, operating hours: 20,357 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 56 g, overall weight: 6,000 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale supplier of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machines: As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine. Reference: Growth Booster (§ 7 Section 2 EStG-E) Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations Manufacturer: Battenfeld Model: Vertikal R 60 / 125 H Control: B4 Year: 2007 Machine number: 130953 – 100 Vertical machine with rotary table / 2-4 stations (750 mm) Operating hours: 20,357 h Injection unit (125) Screw diameter: 25 mm Screw length: 21.6 L/D Shot volume: 58.9 cm³ Shot weight: 53.6 g Heating capacity: 6.78 kW Heating zones: 4 Nozzle stroke: 200 mm Injection pressure: 2,149 bar Clamping unit Clamping force: 60 tons / 600 kN Opening stroke: 250 mm Min. mould installation height: 250 mm Ejector stroke: 150 mm Max. platen distance: 500 mm Rotary table diameter: 1,040 mm Weight: 6,000 kg Extras: Todjx Ak I Ijpfx Af Tsf - Light curtain - Automatic suction loader Simar FX 2504, year 2013 - Water manifold - Air valve

Year of construction: 2019, condition: excellent (used), Mimac ROT500 Rotary moulder Serial: 1910766 2019, Stainless, rotary biscuit moulder, previously used on 500mm trays, up to 350Kgs per hour, with manual, with spare brand new knife, 3Ph Todpfx Aox Akdcjf Tef

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Tedpsxzfkbjfx Af Tjf Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 9500 kg This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Todpfx Afoxy Aqio Tef Injection Moulding

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal Tsdexz Hh Uspfx Af Tef One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: used, Year of construction: 1993, Catalogue number: 7705 Tjdpfx Ajw Edgfef Tsf TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller - Feed via Kardana shafts - Stepless feed speed adjustment - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Tedpfxoxz Awxs Af Tjf Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Mould height (h x v): 520 x 520 mm Tjdpfxoxzfh Tj Af Tef Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm MACHINE DETAILS Control system: Selogica Dimensions & Weight Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper.

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Tsdpfx Afjxz Awlj Tjf Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Tjdpfxoxzfg Ne Af Tof Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Tedpexz Avzofx Af Tsf Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Tjdpjxzd R Tefx Af Tjf Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Tjdpsxzd Nvsfx Af Tef Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Tjdpfx Aexzd Ixof Tef Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x