Clamping force 250 - 999 kN for sale
Your location was not identified (Edit)
screw size:30 mm
injection shot weight in Polysterol:65 g/PS
closing pressure:400 kN
daylight:270 x 270 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica (1. Version)
daylight between platens - max.:550 mm
total power requirement:21 kW
dimensions of the machine ca.:4,30x1,60x2,08 m
few operation hours - condition like new -
- wear reisistant plastification unit
- fully hydraulic clamping unit
- with Vario system
- mould blow unit
- sorter unit
- interface for host co... more
1989
used
screw size 22 mm
moulding weight 33,4 g
closing pressure 200 kN
tie bars distance 254x254 mm
opening stroke 300 mm
dayligth 125 mm
Dimensions (L/W/H) 2,6x1,1x1,7 mm
Bd32cnqg3
total power requirement 9 kW
weight of the machine ca. 2 t more
1991
used
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Smalling force 50 to
Cxsvh8xm
-Control Unilog 4000
-Bar distance 480/580 mm
-Kernzug
-Datenerfassungsterminal
-Handling system Fabr. Battenfeld
-Weight 2.5 to more
Injection moulding machine Krauss Maffei 2K - KM150-700-220C Multiinject
Year of construction: 1998
Screw size: 45 / 18
Shot weight: 278 gr.
He7pcpueg
Number of core pulls: 5
opening stroke: 1000 mm
Installation height min. / max.: 400 mm
distance between tie bars: 500 mm x 500 mm
Removal: Handling more
Beautiful Dr. Boy injection moulding machine
Basic information:
Bjt0wg9pyt
Clamping force: 350 kN
Working hours: 29.80 hour
Control panel: PROCAN ALPHA (1)
Technical information:
Screw diameter: 22 mm
Max. injection force: 1732 Bar
Max. dosing volume: 30 cm³
Max. shot volume (PS): 28 Gr.
Distance between tie bars: 280 x 254 mm
Min. mould height: 200 mm
Max. daylight opening: 500 mm
Extra options:
- Euromap 67 robot interface
- High wear resistant injection unit
- Blow off single
~ All our... more
Engel Victory 200/80 Tech
year of construction 2013
Control: CC 200
Operating hours: approx. 55.000 h Autom.
clamping unit
Clamping force: 800 kN/ 80 to.
tie bar distance: tie bar-less
Opening stroke: 450 mm
max. plate distance.: 700 mm
Tool height: 250 mm min.
plate size: 670 x 600 mm
Ejector travel: 100 mm
Dw9ra3
Injection unit
Screw size: 30 mm
injection volume: 99 ccm
injection weight: 60 gr.
injection pressure: 1451 bar/2197 increased
nozzle con... more
1986
used
screw size 60 mm
injection shot weight in Polysterol 380 g/PS
closing pressure 1600 kN
mould height - Max./min. 300-850 mm
tool clamping area 700x700 mm
450x450 mm
total power requirement 45 kW
weight of the machine ca. 5,7 t
dimensions of the machine ca. 5,5x1,3x2,9 m
Serial No: 300137
Bfqbyse2o8 more
Injection moulding machine Demag Ergotech 650-3300NC4
Odh72
Year of construction: 1996
Screw size: 80
Shot weight: 1600 gr.
Number of core pulls: 2
opening stroke: 930 mm
Installation height min. / max.: 450/950 mm
distance between tie bars: 1000 mm x 900 mm
Removal: Handling more
Beautiful Dr. Boy 55A Pro injection moulding machine.
Basic information:
Clamping force: 550 kN
Working hours: hour
Control panel: PROCAN ALPHA (1)
Technical information:
Screw diameter: mm
Max. injection force: Bar
Max. dosing volume: cm³
Max. shot volume (PS): Gr.
Distance between tie bars: 360 x 335 mm
Min. mould height: 250 mm
Max. daylight opening: 650 mm
Extra options:
Blnntu9pin
- 6-way electrical plug distribution box
- Pneumatic integral picker
- Blow off single
~ All our machi... more
Engel 330/80 Tech Ecodrive only a few hours
G7bxqjn9q
year of construction 2013
Control: CC 200
Operating hours: only approx. 13.000 h
Clamping unit
Closing force: 800 kN/ 80 to.
tie bar distance: tie bar-less
Opening stroke: 450 mm
max. plate distance. 700 mm
Tool height 250 mm min.
plate size: 720 x 600 mm
Ejector stroke: 100 mm
Injection unit
Screw size: 40 mm
injection volume: 201 ccm
injection weight: 184 gr.
injection pressure: 1221 bar/1667 increased
nozzle contact force 48 Kn/ 300 mm... more
1986
used
screw size 50 mm
injection shot weight in Polysterol 200 g/PS
closing pressure 950 kN
mould height - Max./min. 250-700 mm
tool clamping area 590x590 mm
380x380 mm
Bfqby2wbc9
total power requirement 33,2 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 4,3x1,4 m
Serial No: 330077 more
Boy 90A ( Nr. 96)
Year of production: 2005
TECHNICAL DATA
Screw Dia [mm]: 42
Shot Weight [g]: 193
Injection Pressure [bar]: 1724
Clamping Force [kN]: 900
Tie Bar Distance [mm]: 430x360
Platen Size [mm]: 635 x 610
Mould Height min. [mm]: 250
Blqad099zi
CONTROL
Type of Controls: Procan CT
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Power [kW]: 26,3
Workinghours [h]: 7736
Dimensions [m]: 4,9 x 1,2 x 2,1
Weight [kg]: 3100 more
Injection moulding machine Demag Multi 200/560-320h/200r
- Year of manufacture 2004
- Operating hours Operating hours pump in operation 76258
- Screw diameter 30mm/ 30mm
- Special equipment 2nd injection unit (2 components)/ optionally with robot
Blghyetire more
2004
ready for operation (used)
Korea injection molding machine LG Cable Ltd. (LS Mtron) 450 ton, model LGH450N
made in Korea
screw diameter 70 mm
inj. pressre 1820 kgf/cm2
inj. capacity 1360 g
clamping force 450 ton
clamping stroke 1100 mm
motor capacity 59 kW
heater capacity 23.70 kW
without passport
include Robot Yudo 1250mm, Hopper
for sale are 2 pc
Cnk7utaq more
1990
used
screw size 25 mm
moulding weight 41,8 g
closing pressure 350 kN
tie bars distance 304 x 304 mm
Oiphs8gvy
opening stroke 325 mm
dayligth 150 mm
injection pressure 2149 bar
total power requirement 14,5 kW
weight of the machine ca. 2,2 t
Control: Unilog 4000 B
Machine has one pit draw.
belt convoyer
HB-Therm 80°
Serial Nr. A35/04/11/0/05 more
BATTENFELD VM 80 / 525 (S&P 3504)
BATTENFELD VM 80 / 525 UNILOG B6 (Vertikal)
force tons: 80
shot ccm: 318
year: 2008
Oc2vb
price: 24.500€
contact: Herr Ralf Schulz more
screw size:20 mm
injection shot weight in Polysterol:26 g
clamping force:300 kN
screw size:20 mm
max. swept volumne:31 cm³
Ewvnsdd0a
injection shot weight in Polysterol:26 g/PS
injection pressure:2.500 bar
clamping force:30 t
tie bar distance:270 x 270 mm
mould hight min.:200 mm
opening stroke:350 mm
microprocessor control:DIALOGICA
Manual:deutsch / german
robot interface:ja / yes
core pull:nein / no
screw suck back:ja / yes
pump drive power:7,5 kW
total connection power:12,0 kW
total weigh... more
2004
ready for operation (used)
Injection Molding Machine Korea LG Cable Ltd. (LS Mtron) 650 t, model LGH650N
made in Korea
screw diameter 90 mm
inj. pressre 1720 kgf/cm2
Occun
inj.capacity 2890 g
clamp.force 650 ton
clamp.stroke 1350 mm
motor capa. 90 kW
heater capa. 40 kW
without passport
include robot Yudo 1800 mm , Hopper more
Clamping force 450 kN
Size of mould platens (h x v) 550 mm x 430 mm
Distance between tie bars (h x v) HL
Mould opening stroke 360 mm
Blcyyaeyqv
Mould height min. 180 mm
Max daylight 530 mm
Hydraulic ejector - stroke 100 mm
Ejector force forward/backward 40 kN
Screw diameter 18 mm
Injection pressure 2200 bar
Stroke volume 25 ccm
Shot weight, PS 22 g
Injection rate 36 cc /s
Screw speed 20-450 1/min
Nozzle pressure 28 kN
Nominal capacity of pump motor 15 kW
Installed heating capacity 3,2 kW
Adjusta... more
Includes X36 mould (50x30x80 cm. - 540 gr) of DOUBLE FOOTPRINT, NEW mould
- Distance between tie-bars (h x v): 1.100 x 950 mm
- Screw diameter: 100 mm
- Shot weight max: 3.640 g
- Injection pressure: 1.665 bar
- Screw L/D ratio: 20
- Clamping force: 8.0000 kN
- Mould opening stroke max: 0 mm
- Mould height max: 1.100 mm
- Mould height min: 400 mm
- Daylight between platens max: 1.080 mm
- Platen size (h x v): 1.550 x 1.400 mm
Bjta3wgp0b
- Control: COLUMBIA
- Operating hours: 38.684
- Weight: ... more
screw size 22 mm
injection shot weight in Polysterol 28 g/PS
closing pressure 150 kN
daylight 170 x 170 mm
mould height - Max./min. 150 mm
Bfqbyitv07
dimensions of the machine ca. 2,5x1,75x1,95 m
total power requirement 8,2 kW
weight of the machine ca. 1,0 t
Serial-no 129989 more
ARBURG 420C 800-250 VU / vertical injection moulding machine / machine in very good technical condition
Year of construction: 2006
Obqcb
Injection unit:
Screw diameter: 30 mm
shot weight: 89 g
spraying pressure: 2470 bar
Dosing volume: 106 ccm
Clamping unit :
Clamping force : 80 t
distance between tie bars: 420x420 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Air valve x 1
Control with hydraulic core pull x1
Control with hot runners
injection unit... more
closing force 60 to
Screw diameter 30 mm
Pumps were repaired three weeks ago!
Cxa22xzq
Sprayer set very good.
Both the injection and clamping unit newly sealed! more
2003
ready for operation (used)
Korea Hyundai injection molding machine, 350 ton, model SPE-350
made in Korea
clamping force 350 ton
clamping stroke 650 mm
mold thickness 720/320
tie bar h x v: 700x700 mm
daylight opening 1370 mm
screw diameter 66
without passport
Blf8czoyyw
include Robot Yushin 1250 mm, Hopper more
ARBURG 270C 400/70 injection moulding machine
Year of production - 2011
Control - Selogica
Maximum short circuit force (kN) - 400
Tool board width - 445 mm
Tool board height - 445 mm
Distance between columns - 270 mm / 270 mm
Min/Max mould height - 200 mm
Distance between panels - 550 mm
Screw diameter - 18 mm
Injection weight - 24 g
Diameter of the centring ring - 125 mm
Cwgbr7ow
Ejector stroke - 125 mm
Injection pressure - 2500 bar
Number of HK system zones - 3
Number of hydraulic cores - 1 more
Robot ERC43 / 3-E (2001)
- Air Valves: 0
- Distance between tie-bars (h x v): 735 x 735 mm
- Screw diameter: 70 mm
Bjta39xvoc
- Injection rate: 366 cm³/s
- Injection pressure: 1.820 bar
- Injection volume: 1.193 cm³
- Screw speed: 183 rpm
- Screw L/D ratio: 20
- Nozzle stroke / force max.: 500 / 110 mm / kN
- Mould height max: 660 mm
- Mould height min: 250 mm
- Daylight between platens max: 1.360 mm
- Platen size (h x v): 1.080 x 1.080 mm
- Cascades / Sequential valve gates: 0
- Heating zone... more
1994
used
screw size 40 mm
Oipksj88c
injection shot weight in Polysterol 182 g/PS
closing pressure 950 kN
mould height - Max./min. 250 - 725 mm
opening stroke 475 mm
tool clamping area 640 x 640 mm
420 x 420 mm
Dimensions (L/W/H) 4,3x1,4x2,0 m mm
total power requirement 27,5 kW
weight of the machine ca. t
dimensions of the machine ca. m
CNC Injection Moulding Machine Unilog 4000 Control
with core drawing
with belt convoyer, HB Therm 80°
drying air drier more
ARBURG 320M 750-90Year of construction: 1996Injection unit:Screw diameter: 25 mmInjection weight: 26 gInjection pressure: 2500 barDosing volume: 31 ccmClamping unit :Clamping force: 75 tTolm spacing: 320x320 mmSize of the clamping platens: 490x490 mmEjector: hydraulicClamping unit: hydraulic control:MULTRONICA additional equipment:air valve x 1It is possible to adjust the injection unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mmDimensions:Weight: 2360 kgLength/wi... more
2007
ready for operation (used)
made in Korea
Korea Injection molding machine LS Cable Ltd. (LS Mtron) 650 t, model LGH650M
Blf79havik
screw diameter 90 mm
inj. pressre 1850 kgf/cm2
shot weight: 2890 g
clamping force 650 ton
clamping stroke 1350 mm
motor capacity 92 kW
heater capa. 40 kW
without passport
include Robot Yudo1800 mm, Hopper more
Arburg 270U-350-70 (Nr. 83)
Year of production: 2005
TECHNICAL DATA
Screw Dia [mm]: 25
Shot Weight [g]: 40
Injection Pressure [bar]: 1550
Clamping Force [kN]: 350
Tie Bar Distance [mm]: 270x270
Platen Size [mm]: 380x380
Mould Height min. [mm]: 200
CONTROL
Type of Controls: Selogica
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
3tfmopdz
Power [kW]: 10,8
Workinghours [h]: 12183
Weight [kg]: 2100 more
screw size:40 mm
injection shot weight in Polysterol:172 g/PS
closing pressure:500 kN
daylight:320 x 320 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica
daylight between platens - max.:550 mm mm
total power requirement:21,5 kW
weight of the machine ca.:2,3 t
CS version
- highly wear resistant plastification unit
- with Selogica control
- technology stage 1 - wiith 1 regulating pumps
- connection for mould blow unit
- connection for sorter unit
Hxtcrhoz
- core pull
-... more
ARBURG 320C 600-250 / Production line with Arburg Multilift H side-loading robotic system.
Production year: 2000
injection components:
Screw diameter: 30 mm
Shot weight: 89 g
Injection pressure: 2470 bar
Injection volume: 106 ccm
Closure components:
closing force: 60 t
distance between the columns: 320 x 320 mm
Maximum table top dimensions: 446x446 mm
Ejector: hydraulic
Clamping system: hydraulic
Control:
SELOGICA (with the possibility of translation into Polish)
Additional equipment:
Production... more
1991
ready for operation (used)
Clamping force 600 t
Injection pressure 1800 bar
Cylinder capacity 1800 cm3
Screw diameter 80 mm
Circles diameter 200 mm
Distance between tie bars: 915x860 mm
Mold height min. 860 and max. 800
Opening 850 mm max
Daylight: 1650 mm
Number of cores 1 + 1 pcs
Ejector length 500, stroke 250 mm
Cascades hydraulic 4 pcs, pneumatic 4 pcs
Pneumatic valve 2 pcs
Occvl
Heating zones 6 pcs
Oil capacity 1300/68 l / HLP
Pump power 67 kW
Heating input 34,5 kW
Board thread M 20/50
+ Robot ERC 53/2-EA made in y. ... more
CE
Bjiddhufyk
- Air Valves: 0
- : 0
- Distance between tie-bars (h x v): 870 x 820 mm
- Screw diameter: 55 mm
- Shot weight max: 438 g
- Injection rate: 356 cm³/s
- Injection pressure: 1.675 bar
- Injection volume: 475 cm³
- Screw L/D ratio: 0
- Nozzle stroke max: 0 mm
- Clamping force: 0 kN
- Daylight between platens max: 1.530 mm
- Heating zones: 0
- Cascades / Sequential valve gates: 0
- Platen size (h x v): 1.260 x 1.210 mm
- Ejector force: 0 kN
- Mold opening force: 0 kN
- Control: 0
... more
Arburg 270U-350-70 (Nr. 84)
Year of production: 2005
TECHNICAL DATA
Screw Dia [mm]: 25
Shot Weight [g]: 40
Injection Pressure [bar]: 1550
Clamping Force [kN]: 350
Tie Bar Distance [mm]: 270x270
Platen Size [mm]: 380x380
Mould Height min. [mm]: 200
CONTROL
Type of Controls: Selogica
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Endhelj
Power [kW]: 10,8
Workinghours [h]: 48701
Weight [kg]: 2100 more
screw size 35 mm
injection shot weight in Polysterol 140 g/PS
closing pressure 800 kN
stroke 425 mm
height of form 200 mm
plate size 590x590 mm
control Unilog 4000
total power requirement kW
weight of the machine ca. 3900 kg
dimensions of the machine ca. 4,15x1,5x1,95 m
Ben7nd3xbt
Machine is in very good condition.
Machine has only 31.074 working hours more
ARBURG 370M 600-200
Year of construction 1993
Injection unit:
Screw diameter: 35mm
Injection weight: 121 g
Injection pressure: 1500 bar
Dosage volume: 144 ccm
Clamping unit :
Clamping force: 60t
Distance between bars: 370x370 mm
Size of clamping plates: 545x545 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control:
MULTRONICA
Additional equipment:
Blamyekerv
*
Dimensions:
weight: 3080 kg
length/width/height: 4.30x1.85x1.60m
Drive:
Pumps/motor: 11 kW
Heating capacity: 5,5 kW
Total output: 16.5 k... more
