Used Hydraulic single column presses over 125t for sale (33)

Year of construction: 1992, condition: used, machine/vehicle number: 530, The STEINER hydraulic press was manufactured and developed with practical aspects in mind. The hydraulic device is located on the hydraulic tank behind the press. Control blocks and valves are easily accessible from the outside and can be quickly replaced if necessary. The hydraulic radial piston pump is located on the drive console and is connected to the motor and pump mount via a coupling. The press stand is indestructible and torsion-resistant Sthal welded construction. The ironing board is screwed to the stand. The hydraulic cylinders are screwed to the press stand from above and guided through the mounting holes in the appropriate direction. The piston is connected to the piston rods via a wear ring. Four-sided, diagonal, flat grooves on the stand allow for very precise movement. Hydraulic cylinders are made of high quality material and are designed for high pressures. The piston rods are ground and hard chrome plated. The cylinder tubes are honed from the inside. Seals that have been maintained over many years are characterized by high quality and tightness. The piston rods are guided by guide bands, which are characterized by very low abrasion and a long service life. The control, control and monitoring devices for all control devices are installed in the control unit. Mutual locks ensure that no two program processes can run at the same time. The electrical control is located in a closed control cabinet. Pressing force - 8000 kN Operating pressure - 285 bar Installation height - 850 mm Stroke - 250 mm Table surface - 1550 x 1450 mm Hsdpfxjpgktcj Afijnu Ram surface - 1550 x 1450 mm Stand passage - 1800 mm Lateral Breakthrough in the stand on the right and left Width x height - 1300 x 1075 mm Table top thickness - 155 mm Width of the machine approx. - 3100 mm Depth approx. - 4300 mm Height approx. - 4660 mm Table height above hallway - 500 mm Table height under hallway - 755 mm Drive power - 55 kW Oil requirement approx. - 1400 liters Total weight approx. - 60 tons

Condition: good (used), functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons Hedpswhc H Aofx Afisnu

Year of construction: 1989, condition: ready for operation (used), machine/vehicle number: K 1283, A used bending machine from the manufacturer HMK. The pressing power up to 500 t Year of construction: 1989 Machine number: 1283 Hedpfx Afod Eg R Teijnu

Condition: new, machine/vehicle number: DF0189, pressure:500 t passage width:1200 mm stroke:400 mm weight of the machine ca.:40 t dimensions:2800 x 1750 x 4350 mm Hodpfx Asfxykasfienu return capacity:50 t :50 kW Max Working height:800 mm :0 - 10 mm :0 - 10 mm/sec. :400 mm pestle plate:1000 x 1000 mm table plate:1200 x 1200 table height over floor:1200 mm :700 l

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening. Hjdpfxjig Hzke Afienu

Condition: good (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2089, total height: 5,000 mm, table height: 1,000 mm, total width: 3,000 mm, pressing force: 250 t, overall weight: 25,000 kg, MIB BRAND HYDRAULIC PRESS YEAR 01/2000 Hnodpfx Aev Hbh Refiou CAPACITY 250T MACHINE TO BE RESTORED, COMPLETE

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, table height: 400 mm, pressing force: 500 t, table width: 5,500 mm, table length: 3,000 mm, TECHNICAL DETAILS capacities Maximum force: 500 t Restoring force: 200 t Table dimensions: 5,500 x 3,000 mm Table stroke: 3,500 mm Table height above floor: 400 mm Extension speed of the table: 60 - 80 mm/s Stroke of the carriage: 1,800 mm Daylight opening: 2,000 mm Cushion dimensions: 3,960 x 1,860 mm Stroke of the upper cushion stop: 180 mm Cushion force: 100 t Fast return: 35 mm/s Electrical power: 380 V, 50 Hz Output: 59 kW Hjdpou Iy Trofx Afionu EQUIPMENT PLC Siemens Bolster table with dimensions of 5,500 x 3,000 mm Cooling in the control cabinet CE marking

Year of construction: 2003, condition: excellent (used), Used Loire 2000ton hydraulic H frame press for sale Table dimensions ( x-y/mm) : 5000×2500 Slide dimensions ( x-y/mm) :5000×2500 Stroke ( x/mm) : 1700 Light at tdc ( x/mm) :2700 Lateral window ( x/mm) : 2900 Cushion in the slide (x/mm) : 3400×1900 Stroke of the cushion in the slide (x/mm) :150 Cushion stroke ( x/mm) : 400 Cushion power ( ton) : 600 Lateral moving bloster Brand Loire Power 2000 Ton Table dimensions X-Y 5000 x 2500 Slide dimensions (x-y) 5000×2500 Stroke 1700 Light at tdc 2700 Shut eight 1000 Lateral window Lateral window dimensions (x-y/mm) 2900 Internal slide Dimensions X-Y 3400×1900 Stroke 150 Work speed to 100% 22 mm/sec Strokes/min 37 mm/sec Strokes/min 400 mm/sec Strokes/min 350 mm/sec Cushion Power 600 Ton Stroke 400 mm Cushion table dimensions (x-y) 37001900 Accessories Accessories lateral moving bolster Overall dimensions Hedon Sma Hjpfx Afijnu Weight 310 Front 6250 Deep 5000 Height 9650 Conditions Machine conditions Working Electric plant conditions Working Year 2003 New hydraulic H frame press for sale complete with warranty