Single Column Press - Hydraulic

Calende Einständerpresse

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Hedofhcc Hepfx Aahop Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Hodokvmi Sepfx Aahjp Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons. Hedpfjfhcc Uox Aahep

Condition: new, Year of construction: 2019, pressing force: 110 t, pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Hodpefxygtsfx Aahop Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, any angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Rated drive power: 10 hp Hsdpfodbny Esx Aahsp Max. speed: 1800 rpm Weight: approx. 82 kg Accessories / Special features: • Tool clamping: manual • The main spindle and all shafts and fittings are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered fittings are ground according to the "KLINGELNBERG" system • The rolling bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Hsdedxrqwjpfx Aahop Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Hsdpfxsd Swtae Aahop Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: excellent (used), functionality: fully functional, usable tank capacity: 60,000 l, total height: 11,500 mm, inner diameter: 2,900 mm, outer diameter: 3,000 mm, wall material: stainless steel, Agitator Tank made of Stainless Steel (V2A), Insulated (Milk Tank) Technical Data / Dimensions Available quantity: 5 Volume: approx. 60,000 liters Tank type: Agitator tank Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 2,900 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,100 mm Total height: approx. 11,500 mm Specific gravity of medium: 1.0 t/m³ Operating pressure: non-pressurized Operating temperature: 40°C Notes: former milk storage tank Material / Construction Internal shell material: V2A (1.4301) Foot material: stainless steel Internal weld seams: ground smooth Insulation Insulation thickness: approx. 50 mm Insulation material: PU foam Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Notes: The insulation shell of the tank has some minor dents which do not affect its functionality. Hjdoxw Rrpopfx Aahsp Equipment Support design: foot ring / support skirt Mounting: fixed Top head: conical Cone angle: approx. 15% Bottom head: conical Top head features: 1 x vent hood with mesh 1 x CIP nozzle 1 x threaded socket for level limit measurement 2 x lifting lugs Shell features: 1 x oval manway, swing-type (approx. 340 x 440 mm) 1 x oval manway (approx. 340 x 440 mm, in support skirt) 1 x agitator flange with agitator 1 x threaded nozzle for temperature measurement Bottom head features: 1 x threaded nozzle for temperature measurement 1 x nozzle for level limit measurement 1 x residue drain Notes: The connection configurations differ slightly between the 5 tanks Agitator Agitator included Type: propeller Classification: high-speed Quantity: 1 Mounting position: lateral Speed: 940 rpm Agitator power: 2.2 kW Impeller length: approx. 600 mm Manufacturer: Stelzer Notes: Some agitators supplied with stainless steel cover

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Hodpfx Aasv Rwu Uehjp Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Hsdpfx Ajg Rn Efeahop Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.