Used Upstroke for sale (16)

Year of construction: 2024, condition: new, Cutting force 30 Tons or 60 Tons Table surface 1000x600mm or 1600x800 mm The electro-hydraulic upstroke cutting machine with motorized moveable beam type USC is a machine which has been constructed due to our long experience on this area of cutting machines. Kodjnfu Nwspfx Affonf They are characterized by maximum operational reliability and an optimal overview onto the working table when the cutting beam is retracted. In the standard version of machine the working cycle is released by the contactless operating security light curtain or via the 2 start buttons mounted on the left and right of the machine. The stroke and passage of the machine are continuously adjustable within the specified limits via an electronic measuring system / potentiometer. An eccentric load on the machine is possible due to the extremely stable central guide column and the arrangement of the two hydraulic punching cylinders. The hydraulic power unit in the modular system is housed entirely at the rear of the machine and is easy to access for maintenance purposes. An automatic central lubrication supplies all lubrication points in the stand with a sufficient quantity of lubricating oil. The electrical switching devices are housed in a separate control cabinet, which is permanently installed on the machine. The setting of the machine by means of clear operator guidance is carried out via the touch panel on the side of the machine. A freely programmable controller processes the processes reliably and quickly.

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Knjdowl Hyuopfx Affof Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Knjdpfxex I I Nce Affof Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Knedpfx Aewiry Isffjf Working hour counter € 400,- Stroke counter € 400,- Deompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € incl.

Condition: used, Year of construction: 2006, Brake force 300 tons Working length 6100 mm Distance between uprights 4550 mm Throat depth 400 mm Punch stroke 320 mm Table width 220 mm Fast speed (0 – 100) mm/sec Knedowhcycspfx Affof Woriking speed (0 - 7) mm/sec Upstroke speed (0 – 90) mm/sec Hydraulic pressure (max) 255 bar Main electric motor 18,5 KW Length 7500 mm Width 2900 mm Height 3700 mm Weight (aproxim.) 32000 Κgr

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 Kodpfxorhirzs Affjnf TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R SIDE FENCING REAR INTERLOCKED

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Knjdpfx Afsxtm Rajfof Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 Kedpfjh H Duhjx Affsnf MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Knjdpfx Aohw Ng Ijffof Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Kodpewir Acsfx Affjnf Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Knedpody Hrdofx Affef Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Year of construction: 1985, condition: used, Used HUGH SMITH 1000 Ton Hydraulic 4 Post Downstroking Press for sale Operating Speeds 50 mm/sec. Gravity approach. 6 mm/sec. Pressing. 50 mm/sec. Return. Working Height 1060 mm. Kedsf A R Uzepfx Affsnf Press Weight 102 tons total. Towler Hydraulics. Machine originally upstroke (see original drawing attached) but converted to downstroke and refurbished in 1985 (see updated drawing attached) with new electrics. Brand new c, h and d frame hydraulic presses for sale – can quote at competitive prices and built to your specification. New 1000ton hydraulic presses available for sale upon request

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 Kodpfx Afepygydjfenf STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, neu ca. 4 Monate ab Auftragse Italien 132500 € 2504.25 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots Knjdpfjwiq Absx Affef 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Knodpjb Tmwaofx Affef Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 Kjdpfx Aswybcyjffsnf OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW