Used hydraulic presses double column / Four column presses for sale (302)

Condition: used, Year of construction: 1983, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm Nkjdpsvuk Tljfx Ahvjw ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s height over floor 6,8 m depth of the foundation 3,0 m power requirement 120 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m as is where is, stored in dismantled condition

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m Nkjdpfx Ahjvuui Dsvjw permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1980, pressure 50 t distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm ram surface 1700 x 750 mm power requirement 11,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way Nksdpfevuk Ngjx Ahvjw No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm Nkjdpevuk Najfx Ahvow oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA) can be offered without putting into operation or alternatively with new control Siemens S7-1500F

Condition: used, Year of construction: 1993, pressure 500 t Nedpfxsvuk I Nj Ahvskw distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz a sister machine can be offered in as is where is condition, partially disassembled

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Nsdovuuhmjpfx Ahvokw Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW Nodpfsvuugvox Ahvjkw weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm Nkjdpfovuuf Eox Ahvjw yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm Nkjdpovuk Iisfx Ahvew die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary Nkedpfx Ahsvuudzsvew can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Nedpfx Aovuuh Tehvokw Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2011, pressure 620 t distance between columns 2250 mm stroke 1250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm table surface area 2200 x 1280 mm ram surface 2200 x 1500 mm table height over floor 800 / 1000 mm column travel -side 750 mm feed down 10 - 250 mm/sec feed up 10 - 500 mm/sec working feed 1 - 24 mm/sec oil volume 2000 l power capacity 45,0 + kW weight 42,0 t Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m year of manufacture 1997 - overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand operation no foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available Nedpfx Ahjvuudhevskw

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Nksdjvuuhgjpfx Ahvow Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 overhaul 2003 permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary Nodpfx Ahsvut H Uevjkw

Condition: good (used), Year of construction: 1983, machine/vehicle number: 809.14, Offer 25461 Technical data: Nkedpfoyff H Ssx Ahvow - Max. pressing force: 30 t - Press pressure regulation - Stroke infinitely adjustable up to 200 mm - Stroke speed adjustable - Max. installation height: 450 mm - Machine table with T-slots: W 800 x D 500 mm - Clearance between columns: 600 mm - Usable table area: W 800 x D 500 mm - Drive: 400 V / 11 kW - Required space approx.: W 1000 x H 2300 x D 1600 mm - Weight approx.: 2500 kg

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Nodpfx Aex Sw Iishvekw Max. fuse rating: 100 A

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm stroke: max. 275 mm Nedpfx Ajgwv S Uohvekw weight: 4.500 Kg.

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 +++ Attention: Machine is part of an online auction! +++ Nkjdpfxjx Rzkxj Ahvew

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Nksdpfox Ry Tfox Ahvjw +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year of manufacture: 2001, Serial No.: 7.5592, Pressing force: 1,000 t, Changeable table: 2,500 x 2,100 mm, Ram surface: 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Drawing cushion table pressure: 30-200 t, Drawing cushion stroke: 300 mm, Press control with OP Siemens Simatic OP 37, Control and switch cabinets Nsdpfox Ry Ntox Ahvskw

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg Nkodpfx Asb I Dqaohvew

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. Nedpewpg Awefx Ahvekw STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Njdpfx Ahjwpgwnsvjkw Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Condition: new, functionality: fully functional, machine/vehicle number: MV-250E/NC, pressing force: 250 t, table width: 2,500 mm, table length: 1,150 mm, Equipment: documentation/manual, safety light barrier, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS TECHNICAL DATA Press force / Main cylinder 250 t Blankholder force 50 t Motor power 11 kW Ram stroke 500 mm Approach speed 80 mm/s Working speed 7 mm/s Return speed 105 mm/s Column diameter 150 mm Maximum pressure 260 bar Usable table area 2,500 x 1,150 mm Column clearance 2,500 x 700 mm Maximum open height 1,000 mm Blankholder (cushion) size 950 x 750 mm Working height 1,100 mm Overall height 3,650 mm Weight 15,000 kg The hydraulic four-column press MV-250E/NC belongs to the M/NC series and is specially designed for high precision and capacity, particularly in deep drawing operations. Outfitted with upper and lower tables made from C45E steel, featuring DIN-650 T-slots to ensure minimal friction during vertical movement of the upper table. This is facilitated by maintenance-free bi-metal bushings and perfect parallelism by means of four chrome-plated and precision-ground cylindrical columns. The press features an optimized hydraulic system operating at pressures below 290 bar, ensuring long service life and reliable performance. It complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLES • Consists of three fully welded blocks, manufactured exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Designed and calculated using finite element analysis software. Nsdpfowkuchox Ahvokw • The lower table is equipped with a 50-ton hydraulic cushion, usable area 950 x 750 mm, and three front supports for tooling outside the press. • Integrated SIEMENS KTP-400 NC for controlling ram stroke, speed changes, and cushion control. • Includes a SIEMENS S7 PLC, permitting storage and programming of up to 99 settings. CYLINDER AND HYDRAULIC UNIT • Single-acting cylinder with honed sleeve, chrome-plated piston, and wear-resistant guides. • Complete hydraulic unit installed on the top of the press. • Hydraulic unit comprises a low-noise Denison hydraulic pump and an air-oil cooler. • Includes: - Decompression system - Solenoid operated pressure valves - Pre-fill valves - Communication valve - Check valve - Pressure relief valve - Safety catch valve ELECTRICAL INSTALLATION AND SAFETY • Features a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen on the control panel. Enables programming of semi-automatic and automatic modes, power, stroke, and dwell time. Offers storage for up to 99 recipes; each recipe is fully programmable for the above parameters. • The electrical control panel features a selector switch for mode selection: manual “setup” or automatic “production” cycle. • Machine operation via electric low-voltage foot pedals. • Safety features include category IV light curtains in the front working area, two fixed side guards, and a rear safety guard with a magnetic interlock detector.

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Nsdpfx Aswlrv Uehvskw Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.