Double-column hydraulic press, double-column press, straightening press, hydro press
ALPHA TEC -- ALPHATEC RPS 5000

Name: ALPHA TEC -- ALPHATEC RPS 5000
Brand: ALPHA TEC -- ALPHATEC
Price: 65000 EUR
Availability: InStock

Fixed price plus VAT

€65,000

Condition

Used

Location

Hessisch Lichtenau Germany

Double-column hydraulic press, double-column press, straightening press, hydro press ALPHA TEC -- ALPHATEC RPS 5000

Machine data

Machine type:: Double-column hydraulic press, double-column press, straightening press, hydro press

Manufacturer:: ALPHA TEC -- ALPHATEC

Model:: RPS 5000

Condition:: used

Price & Location

Fixed price plus VAT

€65,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A3847567

Reference number:: 57682

Update:: 11.03.2026

Description

Machine not operational - control system not functioning
Available at a special price
Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000
Fjdpsdzqptjfx Ad Iopi
Factory No. 300487, Year of Manufacture 2006
Pressing force: 500 tons
Distance between columns (front and rear): 2520 mm
Table area: 2500 x 2500 mm
Ram area: 2500 x 2500 mm
Ram stroke: 600 mm
Maximum installation height: 600 mm
Table height above floor: approx. 900 mm
Tank capacity: approx. 1000 liters
Ram retraction force: approx. 22 tons
Adjustable forward speed: 100-800 mm/s
Pressure build-up to 5000 kN: approx. 0.7 sec.
Return stroke speed: approx. 300 mm/s
Main motor power: 75 kW
Control pump motor power: 2.2 kW
Power supply: 400 Volt, 50 Hz
- 8-fold flat guide for the ram
- Hydraulic ram locking in the top dead center position
- Adjacent control cabinet (200 x 50 cm)
- Electrical control system SIEMENS PLC S7-314
- Operation via SIEMENS OP 170-B (5.7")
- 2-hand control panel located beside the machine
- Floor-level installation
- Table top 2510 x 2530 x 135 mm (approx. 6700 kg)
- Central lubrication system
- Operating manual with circuit diagrams
Space requirement (L x W x H): 372 x 260 x 460 cm
Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm
Weight: approx. 50 tons
The machine was used for straightening heated steel flanges.
From insolvency – in good condition.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

597 listings online

Call

Send inquiry

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Double post hydraulic press EMANUEL DEA 400/2000

Ciriè

18,898 km

Double post hydraulic press
EMANUELDEA 400/2000

Call

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Fpedeihf R Uspfx Ad Iei Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

See details

Listing

Laser engraving machine BAUBLYS BL 65 S / NC

Root

18,756 km

Laser engraving machine
BAUBLYSBL 65 S / NC

€3,800

Fixed price plus VAT

Call

Listing

Fully automatic multicoil plant CIDAN Forstner 1524 x 1,5 mm bei 400 N/mm²

Feldkirch

18,666 km

Fully automatic multicoil plant
CIDAN Forstner1524 x 1,5 mm bei 400 N/mm²

Call

Condition: new, Year of construction: 2026, Build your production facility for the best ergonomics, efficiency and profitability. A sheet metal decoiler will allow your business to save money, reduce waste within your shop and help free up storage space. We have the right solution whether your sheet metal workshop is big or small. CIDAN Machinery has a wide range of decoilers that can be combined to make an efficient production facility based on your requirements – where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. Fpedpfx Asmfn Icjd Iji Using a sheet metal decoiler from CIDAN Machinery: - is very efficient - reduces waste - is ergonomic - saves money.

See details

Listing

Rovereto

18,624 km

Cold Rolling Mill
FROEHLING300

€72,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Fpodpjg Ryqkjfx Ad Iji Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.

See details

Listing

Linz

18,298 km

CNC-Turning-Boring-Milling Centre
WFL Millturn Technologies GmbH & Co. KGM60-G MILLTURN 2000mm

Call

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) Fedpsu Hl R Tjfx Ad Iepi AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

See details

Listing

Freising

18,468 km

Column slewing crane
DEMAG

Call

Listing

Ciriè

18,898 km

Hydraulic press
MOSSINIPO/2M/P2000

Call

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Fsdpfxjvm Eixs Ad Ijpi Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

See details

Listing

Overhauled industrial robot + warranty FANUC M-900iA/260L R-30iA

Weert

18,620 km

Overhauled industrial robot + warranty
FANUCM-900iA/260L R-30iA

Call

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Fedpsp T Umqefx Ad Ispi Type: M-900iA/260L Controller: R-30iA Payload: 260 kg Reach: 3.1 m General purpose: Heavy payload, long arm Robot mass: 1800 kg Delivery time: To be agreed IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily business is the reliable delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Established in 2002. We ship worldwide!

See details

Listing

Birmingham

18,725 km

Hydraulic Press
SchulerEB 2-500

Call

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Fodpfx Adjhcnxro Iepi Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

See details

Listing

Bar Automatic Lathe - Multi Spindle SCHÜTTE AF51

Germany

18,577 km

Bar Automatic Lathe - Multi Spindle
SCHÜTTEAF51

Call

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Fodjiay Sfopfx Ad Ispi Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

See details

Advertise here