Used hydraulic presses double column / four column presses for sale (214)

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Cjdjhcnxrepfx Agrehd Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Chedpsyz Dr Tsfx Agrsd Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Cjdpfx Asup Skwsgrjhd Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm Cjdpfx Aot Hwxujgrehd stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW Chedpfxjt Hwpyo Agrsd weight of the machine ca. 16 t dimensions of the machine ca. m

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders Cjdpfx Agjfn Apzjrehd - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 65056, functionality: fully functional, pressing force: 5,000 t, stroke length: 900 mm, table width: 4,520 mm, table length: 2,150 mm, overall weight: 319,000 kg, Equipment: safety light barrier, Pressure build-up time: 3.6 s Pressure relief time: 1.5 s Cjdpsxb Tplefx Agrshd 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Tool change device Mesh safety enclosure with light curtains

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm Chedpelp U Arjfx Agred stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm Chedpeu Nfmmofx Agred clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Manufacturer: EXNER Type: EX 20 Chjdjxbf Ndjpfx Agrsd Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Csdpfoin Et Nox Agrshd Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Chsdpfx Asvmfzbogrsd Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Chodpfx Asuqd S Asgrsd Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1987, pressure 125 t Chjdpfxet Hwuij Agrsd distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Chsdpfx Ajy Szwnjgred Capacity 400 tons Table 700x1000 mm

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm Chedpfx Aslp Uz Uegrsd stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t Chsdpfjlp U A Iox Agrod dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm stroke 310 mm Cedpjxvdr Hsfx Agrohd weight of the machine ca. 3500 t

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Chjdshgiwnjpfx Agrjd Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm Chodpfx Agevnwd Djred tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm Csdpfxjzrptbe Agrshd ram surface 150 mm speed down 200 mm/s speed up 200 mm/s working speed 20 mm/s oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW Cedpfxslp Uz Rj Agrohd weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH Chedpfxewuutbj Agrod and the control system is been repalced.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation Chsdpfx Aeg Iihwjgrod at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW Chedpfsu Nfhdex Agrjd weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *