4 column press 400 tons PH4C
HIDRALMAC Viersäulenpresse

Name: HIDRALMAC Viersäulenpresse
Brand: HIDRALMAC
Availability: InStock

Year of construction

2016

Condition

Used

Location

Gelsenkirchen Germany

4 column press 400 tons PH4C HIDRALMAC Viersäulenpresse

Machine data

Machine type:: 4 column press 400 tons PH4C

Manufacturer:: HIDRALMAC

Model:: Viersäulenpresse

Year of construction:: 2016

Condition:: like new (used)

Price & Location

Location:: Gelsenkirchen, Germany

Technical details

Pressing force:: 400 t

Details about the offer

Listing ID:: A7725563

Reference number:: 400T 2500 × 1600

Update:: 19.06.2026

Description

passage width 2500 mm
stroke 900 mm
Total power requirement 62 kW
machine weight approx. 27,5 t
dimensions L x W x H approx. 3950 x 2200 x 4850 mm
retraction force 40 t
Main cylinder 2 pieces
column diameter 220 mm
installation height 1300 mm
table size 2500 x 1600 mm
Nwedpfx Afein Et Ne Sol
ram size 3100 x 16000 mm
table height above floor approx. 900 mm
forward speed 200 mm/sec
return speed 200 mm/sec
working speed 5 - 15 mm/sec
oil tank 1500 l
oil quantity 1200 l
pressure control adjustable from up to 50 - 400 t
thermoforming cushion 1400 x 800 mm
thermoforming unit capacity 30 - 60 t
deep drawing cushion stroke 250 mm
thermoforming cushion speed 5 - 80 mm/sec

robust machine body with solid welded construction
low maintenance and reliable
piston rod with induction hardening and chrome plating
T-slots according to customer requirements, if not specified
22mm according to DIN
CE certificate
manufactured according to EU standards
operating instructions, technical documentation, documentation in German language
engineering steel LCG ASTM A36
T-slots in table and ram according to DIN 650-22
Travel control adjustable via monitor
Light sensors front + rear: Sick 1300mm
Hydraulic components Bosch Rexroth
Monitor Siemens 12 inch
Electrical control box for wall mounting
Interior of the press illuminated with LEDs
Hydraulic block monitored by safety PLC
Energy control system: Reduction of the
idle consumption of the pump to approx. 2 kw
Remote control for remote maintenance
Two-hand operation on movable stand
Further information:
Pressure build-up up to 400 T within max. 4 seconds after closing the die.
Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Operation of the press can be manual, semi-automatic or fully automatic

Send inquiry

These listings may also fit your interest.

Listing

Four Column Press - Hydraulic Hidralmac Viersäulenpresse

Ennepetal

18,538 km

Four Column Press - Hydraulic
HidralmacViersäulenpresse

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t Nwodpfx Afed E Irmo Sjl passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

See details

Listing

Threadrolling machine PROFIROLL ROLLEX INCREMENTAL

Contamine-sur-Arve

18,946 km

Threadrolling machine
PROFIROLLROLLEX INCREMENTAL

Call

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] Nsdpsuhb Uhefx Af Sewl EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

See details

Listing

Gelsenkirchen

18,525 km

Four Column Press - Hydraulic
HidralmacViersäulenpresse

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm Nwedpsdyynvefx Af Ssl table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

See details

Listing

Gelsenkirchen

18,525 km

Four Column Press - Hydraulic
HidralmacViersäulenpresse

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L Nsdpfxsfxyh He Af Sowl :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

See details

Listing

Grinding Machine - Centerless ESTARTA 312

Germany

18,261 km

Grinding Machine - Centerless
ESTARTA312

Call

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm Nedpfxsu Ngyze Af Sswl work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

See details

Listing

Gelsenkirchen

18,525 km

Four Column Press - Hydraulic
HidralmacViersäulenpresse

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec Nwsdpfx Afefxyi Is Sjl return speed:1 bis 9,8 mm/sec quantity of oil:220 l

See details

Listing

Hydraulic Double-Column (Drawing) Press Hidralmac Viersäulenpresse

Ennepetal

18,538 km

Hydraulic Double-Column (Drawing) Press
HidralmacViersäulenpresse

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t Njdofxyh Aepfx Af Sswl :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

See details

Listing

Vibratory Surface Finishing Machine ZTV250 Trough type vibratory machine

İkitelli OSB

17,206 km

Vibratory Surface Finishing Machine
ZTV250 Trough type vibratory machine

Call

Condition: new, Year of construction: 2026, overall weight: 400 kg, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Nedsh I N Udspfx Af Sowl * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

See details

Listing

Kirchheim bei München

18,477 km

Hydraulic press
DUNKESHZ 315

Call

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Nwodov Rwu Uepfx Af Sol Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

See details

Listing

Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1600

Germany

18,510 km

Gear Hobbing Machine - Vertical
GLEASON- PFAUTERP 1600

Call

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Nedpfxew Rrb Hj Af Sjwl Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

See details

Advertise here