Year of construction: 1962, Condition: ready for operation (used), Table diameter: 2133.6mm, grinding head diameter: 1066.8mm, switch cabinet dimensions: 1200x500x2000mm, length: 2700mm, width: 6300mm, height: 4300mm, weight: 35t, including documentation, circuit diagram and history, plus photos of overhaul and repair, geometric overhaul and new switch cabinet in 2005, repair in May 2017, grinding head rewound, stator/ three-phase armature overhauled, grinding shaft/ king shaft overhauled, head with new bearings. Febvhsu R Uu Nouadjgb

Condition: used, Year of construction: 1960, max. grinding diameter ? mm grinding length ? mm workpiece length ? mm total power requirement 0,75 kW weight of the machine ca. 300 kg dimensions of the machine ca. 1 x 1 x 1,7 m tool grinding machine Drive: .75 Fgsbevq Slusvhuadeb

Condition: good (used), Year of construction: 1995, machine/vehicle number: 1905239505, Dia 10 - 65 x 50 mm Fgobvju U Dmmshuadeb

Condition: good (used), Year of construction: 1991, Technical data Febvhovx E Rtjuadegb - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg]

Condition: used, respectively Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm mounted on a common base Fsbvhuasdqgmwjdjgb

Year of construction: 1990, Condition: ready for operation (used), Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible. Fgjbvhuaevgffyjdeb

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4° Febvhusu U D Nhjadogb

Condition: used, Abdreharm RA 1, Abrichtbereich: aushoehlend 0,5 - 32 mm (104 - 162 mm) umfassend 0,5 - 22 mm Abdreharm RA 2, Abrichtbereich: aushoehlend 154 - 210 mm umfassend 10 - 65 mm Abdreharm RA 3, Abrichtbereich: Fgebvj Uryzshuadob aushoehlend 22 - 70 mm (66 - 120 mm)

Year of construction: 1996, Condition: ready for operation (used), Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Fgebeuku Smjvhuadeb

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm Fgebou U D Rlevhuadeb rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4°

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm weight: 95 kg Fgjbvhuobfp Ixsadob

Year of construction: 1999, Condition: ready for operation (used), Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Fjbvhuouku Sysadogb

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Fsbvofnbgyjhuadegb Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm electr. Connection: 380 V, 0.6 kW Space requirement: 670 x 400 x 1140 mm Weight: approx. 120 kg

Condition: ready for operation (used), Year of construction: 1999, Grinding wheel diameter: 200mm, max. grinding diameter/length: 150mm/760mm, travel X/Y/Z: 760mm/460mm/360mm, swivel range A/C: 270°/360°, speed: 3000rpm. Dimensions X/Y/Z: approx. 2200mm/2100mm/2700mm, weight: approx. 6500kg. Fobeua Dn Usvhuadogb

Year of construction: 1980, Condition: used, machine/vehicle number: 1265 / 1308, 6 speeds: 1200 - 10000 rpm Length: 1500 mm Chuck on flexible shaft for clamping Ø: 10 mm drive motor: 380 V, 2800 rpm, 1,1 kW Fgebsb S Stdsvhuadob space requirement: 800 Ø x 1250 mm Weight: approx. 20 kg

Year of construction: 1971, Condition: ready for operation (used), Sanding length/width: 450mm/300mm, workpiece height: 350mm, max. sanding wheel width: 50mm, weight: approx. 1500kg. Fjbett Dx Ejvhuadegb

Year of construction: 1975, Condition: ready for operation (used), machine/vehicle number: M-27 738, Center hight: 165 mm Center width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Fgsbvsd Rv Rbjhuadob Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Year of construction: 1974, Condition: ready for operation (used), A Karstens cylindrical grinding machine with display is available. Center height: 180mm, grinding diameter: 360mm, center width: 650mm, max. workpiece weight flying/between centers: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, mounting cone: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible. Fgobvhujvf Iy Rsadjb

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Fgsbvocwwm Tjhuadob Weight approx.: 85 kg Space requirement: 720 x 470 x 400 mm

Year of construction: 1989, Condition: ready for operation (used), Workpiece diameter (radial curve): 600mm, workpiece length (radial curve): 200mm, travel X/Y/Z: 650mm/250mm/300mm, work feed: 30m/min, rapid traverse: 30m/min, max. tool diameter: 300mm, max. tool width: 63mm, control: Siemens 840D. Documentation available. On-site inspection is possible. Fgsbvjvpvk Eehuadob

Condition: used, Grinding wheel dimensions: Diameter 175 mm Febvhsby Hh Iouadegb Width 25 mm Bore 51 mm electr. connection: Alternating current 220 V, 420 W kW space requirement: 400 x 400 x 1140 mm weight: 33 kg

Condition: used, machine/vehicle number: 004296, Grinding wheel dimensions: 200 x 25 mm Grinding wheel speed: 2900 rpm Grinding wheel drive: 380 V, 0.5 kW Febvhjbnyk Ejuadsgb Space requirement: 550 x 450 x 1100 mm Weight: 95 kg

Year of construction: 1962, Condition: good (used), machine/vehicle number: 3791, max. grinding length: 620 mm max. grinding width: 250 mm table plate chuck: 200 x 620 mm Fobvhued Ihiisadsgb grinding plate measures: 200 x 220 x 51 mm electrical connection: 380 V, 1/1,8 kW space needed: 1650 x 1450 x 1800 mm weight: 1350 kg

Condition: ready for operation (used), machine/vehicle number: 27246, Dividing head carriage movement: 100 mm Table longitudinal movement: 260 mm Table height adjustment: 50 mm Swiveling the table slide by: 360 ° Swiveling of the vertical slide guide: 360 ° 2 spindle speeds by pole-changing motor: 3750/7500 rpm Drive motor, pole-changing: 0.5 / 0.6 kW Space required: 980 x 600 x 1500 mm Fgjbvsd Ivfyohuadeb

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW Fgsbod Ixbcsvhuadeb space needed: 530 x 400 x 1180 mm weight: