Condition: used, Year of construction: 2002, grinding length 2000 mm grinding width 1020 mm workpiece height 725 mm workpiece weight 3300 kg table load 4,3 t surface area 2000 x 1000 mm height over floor 1000 mm max. dia. of grinding wheel 500 mm max. width of grinding wheel 100 mm taper diameter 203,2 mm required space L 7,4 x B 3,8 x H 2,8 m grinding spindle drive 26 kW 2000 1/min Y-axis drive Speed 3000 Z-axis drive Speed 3000 spindle turning speed range 50 bis 2500 U/min 0,001 mm Control Siemens weight of the machine ca. ca. 15 t ABA MULTILINE 2010 Precision surface grinding machine Serial number: 208 980 Fob Eovy Iqfsylq Eopg Accessories: - Abamatic 1 N.D. - Machine bed heating - Mechanical air filter system AFS1600 - Electro-permanent magnetic clamping plate 2000x800mm - Coolant with belt filter - Electric straight dressing unit

Condition: excellent (used), Vacuubrand chemistry diaphragm pump Here we offer a Vacuubrand chemistry diaphragm pump. VACUUBRAND VARIO chemistry diaphragm pump MV 10C EX VARIO Technical data: Max. Pumping speed 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temp., lower limit, operation, in °C 10°C Ambient temp., upper limit, operation, in °C 40°C Ambient temp., lower limit, storage, in °C -10°C Ambient temp., upper limit, storage, in °C 60°C Max. Max. outlet pressure absolute in bar 1.1 bar Connection on suction side Small flange KF DN 25 Connection on pressure side Small flange KF DN 16 Nominal power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension B in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU-PURE®) 42 dBA EX approval Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, external chamber with inert gas purging: II 2G Ex h IIB T4 Gb X, Outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency Voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: gebraucht / used Fpeb Eylsq Suwmjq Esg Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: WAC 715 Scalar, Used peripheral grinding machine with automation. Many diamond grinding wheels and accessories. in good condition. Machine has been operated with oil Fpjb Eylqjr Dbm Rj Eog

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT Fjbjv E Rkre Eylq Eepg - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,321 h, Functionality: fully functional, machine/vehicle number: 0418490010, working width: 1,650 mm, workpiece height (max.): 920 mm, TECHNICAL DETAILS Workpiece thickness: 0.6 - 150 mm Working width: 1650 mm Workpiece height: 920 mm Grinding belt & drive Grinding belt width: 1670 mm Fpeb Eylev E Ny Seq Eeg Grinding belt length: 2620 mm Aggregates & performance 1st aggregate: 18.5 kW (grinding belt drive, 1 speed) 2nd aggregate: 15 kW (grinding belt drive, 1 speed) 3rd aggregate: 11 kW (disc brush - round brush) 4th aggregate: disc brush - round brush MACHINE DETAILS Weight: 7,200 kg Total connected load: 63 kW

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Fpsb Eevyuw Ssylq Ejg Grinder parameters: Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: excellent (used), CONTROLS .. conventional ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Feb Eyovdv S Sjlq Eopg Equipment: - Accessory cabinet with extensive equipment - Machine used very little and in good condition

Condition: used, Year of construction: 1992, operating hours: 25,000 h, Functionality: limited functionality, machine/vehicle number: 732/92, total width: 4,360 mm, total length: 2,100 mm, total height: 2,300 mm, workpiece weight (max.): 250 kg, type of input current: three-phase, input voltage: 400 V, grinding width: 400 mm, grinding wheel diameter: 400 mm, grinding length: 1,200 mm, input frequency: 50 Hz, distance table to spindle center: 700 mm, overall weight: 4,200 kg, grinding spindle speed: 4,000 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 50 rpm, frequency: 50 Hz, input current: 80 A, power: 23 kW (31.27 HP), height adjustment type: electric, disc diameter: 400 mm, tank capacity: 1,000 l, Equipment: rotational speed infinitely variable, Flat profile creep feed grinding machine Was used for creep feed grinding Equipped with: coolant cooling / steam extraction / chip separator / clamping magnet plate Control: Siemens 820 G Fpeb Eylev E E Ewsq Ejg Drives: Baumüller Operating instructions available

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, grinding length: 1,300 mm, grinding width: 650 mm, total height: 800 mm, grinding wheel diameter: 400 mm, grinding wheel width: 127 mm, overall weight: 7,000 kg, distance table to quill: 800 mm, space requirement height: 2,200 mm, space requirement length: 2,625 mm, space requirement width: 4,825 mm, Equipment: documentation/manual, Max longitudinal table travel 1500 mm Min. longitudinal table travel 150 mm Max cross stroke 650 mm Grinding length 1300 mm Grinding width 650 mm Worktop 1300x500 mm Distance between table and spindle axis 800 mm Grinding wheel dimensions 400x127x50 mm Hydraulic unit motor 7.5 HP Spindle motor HP 10 Control unit tank capacity 240 litres Refrigerant tank capacity 300 litres Fob Eevprdhoylq Ejpg Electric pump for refrigerant HP 0.35 Longitudinal speed m/1' 1-40 Cross speed m/1' 0-3 Automatic vertical feed 0.001 mm Automatic cross feed 0.001 mm Machine net weight 7000 kg Machine overall dimensions (widthxdepthxh) mm 4825x2625x2200 USED MACHINE

Year of construction: 1994, Condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Fsb Eylqev Exthj Espg

Condition: used, High gloss polishing machine Manufacturer Emme Elle Type LBA 1300 Automatic polishing machine for flat parts Working width 1300 mm 2 tables with vacuum workpiece clamping, which can be used alternately. Total work surface approx. 1300 mm x 10 m Equipped with: 4 rotating and oscillating rollers, rotation speed approx. 5-25 rpm 4 rotating foam polishing pads Voltage 380 V 50 Hz 3 Ph Installation dimensions approx. 12 x 2.2 m Weight approx. 5,000 kg Fpebsv Ew Hmo Eylq Eog Machine is completely checked and cleaned when ordered.

Condition: used, Year of construction: 1986, type of input current: AC, input voltage: 400 V, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, grinding width: 150 mm, grinding wheel diameter: 508 mm, grinding length: 1,200 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 4 m/min, travel distance X-axis: 1,300 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 370 mm, input frequency: 50 Hz, grinding wheel width: 150 mm, grinding spindle speed: 3,000 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, frequency: 50 Hz, power: 79 kW (107.41 HP), Equipment: rotational speed infinitely variable, Blohm Profimat HB 412 CNC CD profile grinder => 3-axis machine Machine control: SIEMENS Sinumerik 3G Spindle drive: 79 KW Grinding wheel: 508 x 150 (160) x 203,2 mm Machine doors: one door is automatically opening/closing Automatic balancing unit: "Hydro-Balance" Febsv Ev Hxe Eylq Espg Overhead dressing unit: CD / covering 150 (160) mm width dressing capacity Linear scales: installed in all three axis (X-/ Y-/ Z-)

Condition: excellent (used), 1 pc. Balancing mandrel for grinding wheels with knurled nut Smallest taper diameter 40.5 mm Largest taper diameter 50 mm Fob Eysh Ukr Hjlq Ejpg Taper length 50 mm Cylindrical taper R/L diameter 30 mm Total length 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 4143 Dortmund - Wambel

Condition: new, WBG75 - ROGI belt sander 400V - 3 Phase Sanding belt ----- 75 x 2000 mm Belt speed ----- 33 mtr/s Motor ----- 3 KW Weight ----- 115 KG INCLUDED Fob Ejga T Ayoylq Eepg * Robust undercarriage * Sanding belt

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Fsb Eovygxnsylq Espg Clamping range 2 - 15 mm

Year of construction: 1994, Condition: ready for operation (used), Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible. Fsbev Exrqe Eylq Eopg

Condition: ready for operation (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 145, workpiece weight (max.): 300 kg, total length: 1,000 mm, workpiece diameter (max.): 350 mm, inner diameter: 203 mm, Universal internal and external grinding machine RU 350 X 1000 Maximum machining diameter 350 mm external length 1000mm Year of manufacture 1982 Functional Fsb Eylqev Eur To Eopg

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 119504, center height: 180 mm, workpiece weight (max.): 250 kg, grinding length: 1,750 mm, center width: 1,840 mm, grinding wheel diameter: 500 mm, grinding wheel width: 100 mm, This is a premium refurbished Schaudt PF43 from GSN. The machine is equipped with an external cylindrical grinding wheel and an internal cylindrical grinding device. The machine was last serviced in 2024. The machine is currently still in use and can be viewed under power by arrangement. It is sold with a lot of accessories: here is a small excerpt: Fpob Eylqsv Eurts Eeg 9x grinding wheel holders 2x three-jaw chucks 1x magnetic chuck 1x three-point steady rest 3x 2-point steady rest 3x 2-point steady rest special size for large diameters 1x additional special device for dressing 3x internal grinding spindles different speeds 1x dressing roller + diamond disks 1x coolant tank

Condition: excellent (used), Year of construction: 2014, Machine comes from the Recklinghausen workshops for disabled people consisting of basket centrifuge WALTHER ZM 03 output 1000 L/min. Drum capacity 14 L Aluminum drum with diameter 102.5 mm Wall thickness 9.5 mm Waste water container 300 L Drive 400V / 1.5 Kw Weight 650 Kg Round vibrator CD 300 Work container gross volume: 350 liters Usable volume: 170 liters Largest possible workpiece dimension (measured diagonally): 220mm Total weight: 731kg Drive power at 1500 rpm: 2.6kW Dryer G 200 Model G 200 Capacity 200l Fpsb Eylov Er U Eeq Eeg Other information Late version of the machine Weight (kgs) 495kg External dimensions (WxDxH mm) Ø1200 x 1100 mm A lot of abrasives included in the price

Condition: new, ROGI surface grinder 400V-3F Fpob Ejk Iubvjylq Eog including: Magnetic plate 2-axis digital readout system Grinding wheel flange Grinding wheel Balancing device Cooling system LED work light Toolbox

Condition: used, Year of construction: 1975, x-travel 420 mm y-travel 270 mm workpiece height - mm table-size 254 x 482 mm throat 254 / 318 mm grinding spindle speeds 12. - 60.000 U/min. spindle stroke 92 mm spindle turning speed range 90, 136, 184, 280 U/min number of strokes adjustable 2 - 120 Hübe bei 51 mm 0 1,25 µm bei 30 mm Required air-pressure 7 bar weight of the machine ca. 1430 kg dimensions of the machine ca. 1,45 x 1,2 x 2,4 m The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Fpjb Eylovgnm Tjq Ejg Special price! Machine dealer with own stock of 1600 m².

Year of construction: 2014, Condition: ready for operation (used), A Junker CNC universal external and internal cylindrical grinding machine is available. Grinding diameter: 290mm, grinding length: 800mm, center height: 150mm, max. workpiece weight: 80kg. Grinding length left/right: 800mm/340mm, grinding wheel diameter: 290mm, grinding wheel width: 63mm, grinding wheel bore: 127mm, peripheral speed: 45m/s. Measuring device tec: Diameter measuring range: 1mm, measuring accuracy: 0.5µm, length measuring range: +/-2mm, measuring accuracy: 0.5µm. Machine dimensions X/Y/Z: approx. 3400mm/2500mm/2700mm, weight: approx. 8000kg, control: Fanuc IO-TD, operating hours: approx. 7847h. Documentation available. On-site inspection is possible. Fpeb Ejv Exr Rsylq Eeg

Condition: new, Grinding of drills with a diameter of 2 mm to 13 mm Adjustable angle ----- 90 and 135 Fjb Ejga T D Tsylq Ejpg Grinding speed ----- 5300 o/min Grinding stone ----- CBN 200 Motor ----- 230V/1F/180W Weight ----- 10 kg

Year of construction: 1989, Condition: ready for operation (used), Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible. Fpebjv Exrwj Eylq Eog

Condition: new, WBG150 - ROGI belt sander 400V - 3 Phase Sanding belt ----- 150 x 2000 mm Fpsb Eylega T Iheq Eog Belt speed ----- 33 mtr/s Motor ----- 4 KW Weight ----- 135 KG INCLUDED * Robust undercarriage * Sanding belt