Used Vmx 1 for sale (77,982)

Condition: used, Year of construction: 2003, x-travel 660 mm y-travel 355 mm z-travel 455 mm table surface area 760 X 355 mm table load 1,5 t T-slots 3 T-slot - width 18 mm control ULTIMAX 4 tool change unit 16 max. tool diameter 90 mm max. tool length 200 mm max. tool weight 7 kg spindle turning speed range 10.000 U/min spindle drive 7,5 kW 16 St. tool adaptor SK 40 feed max 28 m/min rapid traverse 35/35/30 m/min Hsdpfx Ahjyy A Anjgst dimensions of the machine ca. 1,8 x 1,9 x 2,4 m weight 3 t total power requirement 21 kW Used vertical machining centre with double-arm tool changer. HURO ULTIMAX 4 CONTROL 10,000 RPM

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Hjdjzw Ex Depfx Ahgjt Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Hjdpfx Ahov Nzucegot

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Hjdpfxoyw Sv So Ahget

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Hjdpfxezu Avzo Ahgjt Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance, spindle nose to machine table: max. 610 mm Distance, spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full load current, three-phase, high: 35 A Weight: 3539 kg EQUIPMENT Tool changer, 20-position Chip conveyor Internal coolant supply, 21 bar Coolant mist extraction system Hodpfjzxhmtox Ahgst Additional coolant filter

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Hjdpfxezwk H Ho Ahget Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Hodozwuryepfx Ahgst

Condition: excellent (used), ALFA LAVAL CAF 2H/1 – Double-Head Aseptic Filler – Stainless Steel ALFA LAVAL CAF 2H/1, a 2-head aseptic filler, designed for the sterile filling of liquid, semi-liquid, and viscous food products into large-format aseptic packaging within industrial processing lines. The dual filling head configuration allows operation with two stations, facilitating process continuity and increasing operational flexibility. This type of equipment is especially suitable for packaging pre-sterilized products that must be maintained under aseptic conditions until sealing. Its stainless steel construction, protected filling zones, and automatic control system allow it to be integrated with sterilizers, aseptic tanks, and complete processing lines for fruits, tomatoes, and other food products. MAIN FEATURES -Manufacturer: ALFA LAVAL -Model: CAF 2H/1 -Type: Automatic aseptic filler -Number of heads: 2 Hedpfxezxk Tpo Ahget -Dual filling station configuration -Product filling under aseptic conditions -Designed for pre-sterilized product -Automatic process control system -Sanitary product circuits -Construction primarily in stainless steel -Integrated process instrumentation and valves -Central control panel -Closed filling zones with safety guards -Roller conveyors for handling the packaging -Designed for industrial operation -Integrable into complete aseptic processing lines PROCESS The ALFA LAVAL CAF 2H/1 receives the product that has already undergone sterilization and guides it to the filling heads, maintaining the required hygienic conditions during filling. The packaging is positioned at the corresponding station and connected to the filling system, with the product transferred within a protected and controlled zone. Once filling is complete, the packaging can be removed and replaced with another to continue production. The 2-head configuration is particularly useful for maintaining an efficient workflow during packaging changeover operations. APPLICATIONS Especially suitable for processors of tomatoes, fruits, and vegetables, as well as manufacturers of purees, pulps, concentrates, juices, and sauces that need to package sterilized products for storage or distribution. Depending on the installed configuration, it can be used with aseptic bags in drums, bins, or other industrial containers. It can be integrated with aseptic sterilizers, buffer tanks, sanitary pumps, CIP systems, and UHT lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2021, Format: 0x0 Net Weight: 210 kg Measurements: (L x W x H) 152 x 76 x 12 Equipment: Mechanical speed: 300 cycles/hour Automatic Registration Mark Sensing 4-Sided Precision Trimming Dynamic Variable Formatting Delicate Media Compatibility Hsdpfxeyxqw Re Ahgst Intuitive Control System Operation Mode: Semi-automatic/Automatic sheet feeding with sensor-driven alignment. Maximum Sheet Size (Width or Length): 74.93 cm (29.5 inches). The maximum square sheet size is 61.1 ?? 61.1 cm (24 ?? 24 inches). Minimum Sheet Size: 20.32 ?? 20.32 cm (8 ?? 8 inches). Maximum Diagonal Capability: Untrimmed raw sheet: up to 86.36 cm (34 inches)Trimmed finished sheet: up to 81.28 cm (32 inches) Maximum Cover Thickness: Up to 0.5 mm

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model with 20 GN 2/1 or 40 GN 1/1 trays is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant supervision. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. Hsdpfxjzwu U Is Ahgjt The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The iCombi Pro has only been used for 5834 operating hours! Approximate power consumption: 37 kW Manufacturer's recommended retail price: €30,739.49 net = €36,580.00 gross Request your best price. These are example photos of an identical model in comparable used condition. Actual photos will follow shortly. Our device service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded devices at fair prices. Professional and competent advice - before and after the purchase. Flexible shipping or self-collection options. Provision of operating manuals, connection diagrams & spare parts. Complete range of accessories at attractive prices. Condition: used, inspected, fully functional Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric device: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Power in steam mode: 54 kW Power in hot air mode: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further information: Temperature range: 30°C to 300°C Detects current cooking chamber conditions Recognizes the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-configurable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature probe with automatic error correction in case of probe failure and positioning aid Door compartment glazed, energy-saving LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and adjustment Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 stages USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: Fast cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed pane and swiveling inner pane Waste water fixed connection permissible according to SVGW Splash and spray water protection IP X 5 Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Hodpjzxg T Eofx Ahgot Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Hodpfxezwa Rbo Ahgot Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2015, x-travel 570 mm Hjdpfx Ajzv Ul Rehget y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Hsdpfx Aozwfiijhget

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, The iCombi Pro is the latest combination steamer from RATIONAL. The iCombi Pro 10-1/1 electric model with 10 GN 1/1 trays is also easy to operate for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The unit has been fully refurbished in our in-house workshop and the combination steamer is fully functional. The base frame shown in the picture is not included in the offer, but can be purchased as an optional extra. Upon request, we also have the matching UltraVent hood and various base frames in stock. Hodpfxozvvzto Ahgjt These are example photos; actual photos will follow shortly. The unit is available from approximately week 35. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a Rational customer service technician throughout Germany. Are you looking for a specific Rational equipment type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. The iCombi Pro from Rational sets a new standard in terms of intelligence, efficiency and flexibility. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: 850 x 842 x 1064 mm Minimum door opening dimensions for transport W x H: 800 x 1100 mm Serial number: E11SJ20062831214 Year of manufacture: 06/2020 Max. filling quantity / tray: 5 kg Max. total filling quantity: 50 kg Weight of electric unit: 130 kg Connection conditions electric: Voltage 3 NAC 400 V Connected load electric: 18.9 kW Power steam operation: 18 kW Power hot air: 18 kW Fuse: 32 A Connection conditions water: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Condition: Used, fully refurbished and functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation or would you like to see something on site? You can reach us during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), functionality: fully functional, Industrial meat slicing machine for boneless meat The EBAKI 1 V horizontal slicer provides consistent cutting of boneless meats. It is particularly suitable for the poultry industry, but can also process pork, beef, turkey, or certain processed meats. This allows for obtaining multiple fillets or slices parallel to each other from a single piece of meat. This technology meets the needs of cutting workshops, meat processing companies, and manufacturers of processed products. Furthermore, horizontal cutting provides a more consistent thickness while improving the presentation of the finished product. Precise horizontal cutting The product moves between a lower conveyor belt and an upper conveyor belt. These two conveyors hold the meat in place as it passes through the cutting area. Then, the blades perform an alternating movement in opposite directions. This ensures that the product remains stable and the resulting fillets are consistent and parallel. This system also minimizes material loss during cutting. Consequently, it helps to better utilize the meat and standardize portions. Diverse applications The EBAKI range can perform horizontal slicing of chicken breasts, turkey, beef, pork, sausages, or bacon. The manufacturer also offers applications for cordon bleu, cooked chicken breasts, and certain extra-thin cuts. Thanks to this versatility, the machine can be integrated into various production lines. It can be used after the preparation or trimming of the meat. Then, the fillets can be transferred to a marinating, cooking, coating, packaging, or freezing line. Hsdpfx Ajzv N Rzohgot Cleaning and production integration The EBAKI design provides easy access to the cutting elements and conveyors. In this range, guides and belts can be disassembled without tools to simplify cleaning and maintenance. The EBAKI horizontal slicer is therefore a suitable solution for companies seeking consistent cutting, better utilization of raw materials, and more homogeneous production. Technical specifications: Brand: EBAKI Model: 1 V Type: Horizontal slicer for boneless meat Year: 2022 Serial number: 22 234 12 20 Power: 1.5 kW Voltage: 400 V Power supply: 3 phases + neutral + ground Frequency: 50–60 Hz Current: 5 A Weight: 460 kg L4MFJ3V6

Condition: used, Year of construction: 1990, The Jagenberg 185-1, manufactured in 1990, is a machine with a format of 1850 mm, currently in stock and located in Germany. It is designed for working with corrugated board and features various shaft configurations (F/E/EE/EB/BE). The machine supports different gluing methods, including 3-point, 4-point, and special gluing. It has a minimum working width of 215 mm and a maximum of 1850 mm, with an insertion range from 150 mm to 1200 mm. After gluing, the working width ranges from 140 mm to 1000 mm. The machine also features motorized format adjustment and a folding base. The delivery terms are FCA. Format: 1850 mm Equipment: Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue folding bottom Motorized format setting Hjdpfx Ahjvfxpvogot

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Hsdpfx Ahozwhk Nogst Through-spindle coolant 20 bar

Condition: used, Year of construction: 2004, The Polar PW-1 Pileturner, manufactured in 2004 with serial number 74M1003, is a robust and efficient solution for handling paper stacks in professional print environments. With a maximum sheet size of 52 x 74 cm, it is designed to simplify the turning, aerating, and aligning of piles, ensuring smooth downstream processing. The machine features tub dimensions of 525 x 840 mm, with an adjustable opening range from 470 mm to 1,255 mm, providing flexibility for different pile heights. Capable of handling a maximum pallet weight of 500 kg, the PW-1 combines strength with precision to optimize workflow efficiency. Currently located in a printshop in Germany, the unit is in excellent working condition and remains a reliable choice for industrial printing companies seeking to improve productivity and ergonomics in material handling. Format: 520 x 740 mm Hjdpoxdv Txjfx Ahget Equipment: Tub dimensions inside 525 x 840 mm max. opening 1255 mm min. opening 470 mm Pallet weight max. 500 kg Max. sheet size 52 x 74 cm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system • with deep-hole drilling cycle function Hedey Tw Ryspfx Ahget Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Hsdpfszwl Ifox Ahget Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - Control system with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Joining milling unit 1961: - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip stock Adhesive application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - PUR adhesives can be used Press Unit 1816: - With driven roller - Pneumatic control of the press unit Trimming Unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling Unit 1942 MOT 2: Hjdpfxozk Nwwo Ahget - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle on the milling unit Corner Copying Unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius Skiving Unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius skiving blade Surface Skiving Blade 1964: - Insert-controlled surface pulling blade - Air nozzle on the surface pulling blade Buffing unit 1940: - Edge thickness for roll material: 3 mm - Edge thickness for strip material: 5 mm - Max. edge thickness for corner copying: 3 mm - Workpiece thickness: 6–45 mm - Workpiece thickness for corner copying: 45 mm - Min. workpiece length: 180 mm - Feed speed: 8 m/min - Workpiece support spacing: 470 mm - Support plate diameter for edge material: 800 mm - Trimming blade for roll material up to: 3 mm - Warm-up time: 3.5 min - Power of jointing milling unit: 2 x 2 kW - Power of trimming saw: 2 x 0.22 kW - Power of the milling station: 2 x 0.6 kW - Power of the corner copying unit: 0.22 kW - Exhaust port for the jointing milling unit: 120 mm - Exhaust port for the milling unit: 70 mm - Exhaust port for planer unit: 70 mm - Dimensions: 5,350 x 1,669 x 1,940 mm - Weight: 1,200 kg

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Hsdpsyuc Ryofx Ahgjt Condition Used, condition appropriate to age. Inspection Inspection of the machine possible by appointment. Further information available upon request.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, controller manufacturer: Haas, overall weight: 3,250 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, 3-axis machining center Manufacturer: Haas Hjdpfxezu Stvs Ahgst Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control: Haas (retrofit) Operating hours: unknown S/N: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel ranges X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint L x W x H: 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with newer Haas control! - In excellent condition.