Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm Nlodpfx Ajzcwfujd Sjc 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Nledpfxozcwfne Ad Ssc Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Nodpfxozd Rqle Ad Sjlc Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Nlodpszhdybefx Ad Sec Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Njdsy Ty Rispfx Ad Selc

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Nljdpfx Adoy Ty N So Soc

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, 2x grinding supports – swivelable 2x diamond surfacing cutters Magnetic clamping plate from SAV 2004 control system update Nodpfozhbarjx Ad Sslc R&D control system

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Nedpfxjzhaz Ij Ad Sslc

Condition: ready for operation (used), functionality: fully functional, Internal article number: 26068 Surface grinding machine Nljdszhadvopfx Ad Sjc ABA FF350 / 22 + Magnetic clamping plate (350 x 150) + Digital display on the Y-axis + Surfacing device + 3 grinding wheel flanges Grinding length: 350 mm Grinding width: 225 mm Workpiece height: max. 315 mm Table size: 350 x 150 mm Table longitudinal travel: 400 mm Table feed rate: 3-22 mm/min Total power consumption: 2.75 kW Dimensions (L x W x H): 190 x 190 x 185 cm (measured including the control cabinet + unit and coolant tank) Weight: approx. 800 kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details Nlodpfxszg Uwzo Ad Sec grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 1998, Suitable for removing sharp burrs on workpieces of all kinds, especially for indexable inserts. Accessories: Siemens Coros OP15 HMI interface Production work cycle: 0.1 – 99.9 min Operating cycle: 0.1 – 99.9 min operating mode: (6) 120,015, Plates Speed continuously variable: 60 – 600 rpm Rated power: 2,17 kW direction of rotation reversal: 0.1 – 99.9 min Brush diameter: 381 mm X-axis (polishing table) speed: 3.5 & 7 RPM capacity: 0,25 kW Direction of rotation reversal (synchronized with the Y-axis): 0.1 – 99.9 min Z-Axis (brush inlet) total rack length: 304,8 mm Fine feed range: 80,01 mm Nedpfxezg Uq Uo Ad Sjlc Smallest step size: 0,01016 mm Contact point recording: manual/automatic Working area workpiece holder plates: 6 Diameter of the baseplate – maximum: 120 mm Cooling (for constant results) Fan: 0,12 kW Control operating terminal: Siemens OP 15 Program storage capacity: 99 Connected load approx.: 480 V / 50 Hz Dimensions W x D x H approx.: 1120 x 810 x 1730 mm Weight approx.: 599 kg colour: Light grey

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Njdpfx Ajzg Udhed Selc Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard Nlsdszg Twtopfx Ad Ssc internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Nsdpfx Adozg Tvcj Sslc Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBTS 651/4 Overall dimensions: 2260 x 1870 x 1450 mm Nedpfx Adsy Uc Tcj Selc Year: 2009 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system Nledsx Dbltopfx Ad Sec

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Nljdpfx Asyh En Eed Soc Depth: 1185 mm Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2002 Weight: 1160 kg Nedey R Eclepfx Ad Sslc Electrical data: 400 V; 5.5 kW d: 840 mm D: 1360 mm Torus Ø: 430 mm The surface of the Pu lining is damaged and in a repaired condition. Recorded in pictures.

Condition: ready for operation (used), Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT 2E 650 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2005 Weight: 1160 kg Electrical data: 400 V; 5.5 kW Nljdoyycc Ijpfx Ad Soc d: 840 mm D: 1340 mm Torus Ø: 430 mm

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Nsdjxdfabjpfx Ad Sjlc Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm Nlodpfxjh St Dqj Ad Ssc ACCESSORIES: DRESSING TOOL

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Nledpfx Asw U A Rmod Soc Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Nsdpfx Adoya Dagj Solc Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Nedeycpv Sepfx Ad Solc Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Nsdpfxjy Sqh Aj Ad Sjlc