Cylindrical grinding machine

TITAN RU 350 x 1-1500

Condition: excellent (used), Grinding length 1000 mm Nwjdpfx Ahok Abxxeksk Grinding diameter ø 350 mm In very good condition.

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Nwedpox N A N Hsfx Ahkek Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N Nwedpfoxyllvjx Ahkjk We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm Nodpfetvf Htsx Ahkjwk - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Nwedpfxjymk E Ao Ahkek Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle Njdex Hp Iwjpfx Ahkewk 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Nedpfxovz Ec Ij Ahkswk Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. * Nwsdpfx Aey I Ak Iehkjk

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor Nsdpfxjylbpvs Ahkswk

Condition: excellent (used), Year of construction: 1995, Maximum height 330 mm Distance between centers 2000 mm Working range: Maximum turning diameter over the bed cover 650 mm Maximum turning diameter over the bed slide 360 mm Main spindle: Spindle diameter in the front bearing 140 mm Nodpfxox Sx Hte Ahkjwk Spindle bore 107 mm Main drive 58.5 kW 2-stage speed range 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis 10/10 m/min Drum turret: Number of tool positions 12 Of which, driven tool positions 6 Cylindrical shank holder VDI 50 mm Dimensions / Weight: Footprint L x W x H approx. 6400 x 2150 x 2000 mm Weight 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools in the turret, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servo controller power module for 2 axes, 1 power module Simodrive, 1 feed-in/feed-out module, 1 control module for 1 axis, 1 control module for 2 axes, inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: EUR 17,000.00 net Important NOTE: In this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year of manufacture 1995), the C-axis positioning does not function. Otherwise, the machine is in perfect condition. Demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel