Used Flame-Cutting machines for sale (38)

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Cjln Uyrsf Ncademorb Track height 650 mm 2x machine cutting torch with cutting table

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. Coln Ujtwm Ubjyrmerb This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: used, Light mark projector for flame cutting machines with drawing scanning Cjln Uyjb Uhr Iermsrb -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available -Dimensions: 230/93/H125 mm -Weight: 0.8 kg

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Crolnjiid Hwj Uyrmsb Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: used, Year of construction: 1980, table width 8000 mm Crslsubd Nhen Uyrmjb table length 2000 mm burner heads 2 weight of the machine ca. 3 t dimensions of the machine ca. 8x6x2,5 m 1 used flame cutting machine with optical scanning manufactured by ESAB Type PXB 20 year of construction 1980 cutting area approx. 8000 x 2000 x 3 - 200 mm 2 torches Transport: - ESAB flame cutting machine - approx. 5.3 x 2.2 m. Weight approx. 3 tonnes o Boom 4.4 x 1.6 x 1.3 o Rails 5.3 o 8 U-frames 2.4 m x 0.16 o Tub 1.3 x 2 o Firing table 1.6 x 3 x 0.57 o Plant table 1.85 x 2.30 Total approx. 5.3 lm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 4841394, Pipe burner SPC 600 Manufacturer HGG Cjln Uyeuy Rn Rormerb

Condition: good (used), Year of construction: 2016, FICEP 1201 FRC Minimum Profile mm 80 x 42 Maximum Profile mm 1220 x 60 1 x OXY FUEL Cutting Head 1 x HYPERTHERM HPR 260XD Plasma Torch. Dust extraction system. Crjln Ueva Hfnsyrmob

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center is suitable for the economical processing of steel sheets and flat steel in steel construction, steel trade and plant engineering. Csln Uyrorr Sqlemorb The Ficep Tipo G31 can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a max. sheet width of 3,100 mm and a sheet length of 14.000 mm in one line. The CNC controlled sheet metal working center is equipped with two powerful 26 kW drilling units. Two tool changers with 24 tool stations each for ISO 40 holders are available for automatic tool change. The machine is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as Hartner solid carbide drills, Nenok Multiplex interchangeable plate tools as well as for use with HSS coolant channel drills in drill diameters from 10 mm to 40 mm. The suction unit for plasma torch cutting and oxyfuel cutting is equipped with a filter system. The Ficep Tipo G31 unit is in a very good condition.

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, CNC plasma cutting system without extraction system and cutting equipment TECHNICAL DETAILS Travel paths: X-axis travel: 1,500 mm Y-axis travel: 3,000 mm Cutting capacities: Cutting width (max.): 1,500 mm Cutting length (max.): 3,000 mm Effective working area: Effective working area: 1,500 x 3,000 mm Machine height: Machine height: 1,400 mm Positioning speed: Positioning speed: 50 - 20,000 mm/min Number of torches: Number of torches: 1 Material thickness: Max. Material thickness plasma cutting: 0.5 - 25 mm Max. Material thickness oxyfuel cutting: 3 - 60 mm Accuracy: Repeat accuracy: 0.1 mm Primary voltage: Primary voltage: 230 V - 50/60 Hz Drive system: AC servo drive: Yes 3D collision sensor: Yes Control system: Control system: EaZy-Light CNC control system (computer terminal) Screen size: 10" LCD screen with membrane keys Screen resolution: 800 x 600 Processor: 400 MHz microprocessor with 64 MB SDRAM memory Crolneu N Icdo Uyrmeb USB port: 1x USB port EQUIPMENT Guide machine Cutting table Control panel Cutting software Without power source

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Crsln Ujf Alb Ajyrmsb Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Year of construction: 1986, Condition: ready for operation (used), machine/vehicle number: 1602097, A used flame cutting machine (3000 x 1800 Corta) from the manufacturer Messer Griesheim. Type: CORTA KS 1500/2000 Machine number: 1602097 Year of construction: 1986 Coln Uysd Eg Tlermjrb Machine connection: 220 V, 50/60 Hz, 1.0 kVA

Condition: used, Year of construction: 2002, machine/vehicle number: 0605-230037, The Peddinghaus ABCM 1250 beam coping machine is used for notching steel profiles in steel processing. The steel profile is moved through the beam coping machine via a roller conveyor and a measuring system and positioned at the point on the profile to be cut. A program previously entered in the Siemens CNC control system can then be started on 3 axes for notching. The notching is then carried out by an oxy-fuel flame cut at the position entered via the Siemens CNC control. Crjln Ujrr Svusyrmsb

Year of construction: 2020, Condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm Crjln Uyrsf Ak Swemeb positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy