Used Flue Systems for sale (36,173)

Condition: not inspected (used), Year of construction: 2002, Sterling Fluid Systems TD20D skid mounted pump Serial no: 0222034/1 (2002) Gjdpfx Aowdxq Aofiouh 8500 litre/min 9 bar 340mm impeller diameter With Firepac (by Cummins Diesel) drive and wall mounted control

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Gsdexm S Hmepfx Afisuh

Condition: excellent (used), Year of construction: 2014, Infrared dryer for textiles the oven is 2.12 m wide the conveyor belt is 1.73 m wide, 4.45 m long, 1.75 m high plus 1 m extractor Gusdpfoxnzt Sox Afieh

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Gsdpfx Aexl Tnpsfisuh

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New filling machine / filler suitable for filling liquids, pastes, creams, oils, etc. Typical applications include: - Disinfectants - Shampoos - Creams - Honey - Jam - Milk - Yogurt - Water - Alcohol - Pesto - And more This is a robust machine powered by compressed air and 220V, fully Plug and Play! Ideal for small-batch filling operations. Even a small compressor is sufficient to operate this machine. A compressor can be supplied upon request. Gujdpfx Ajrivwfofieh The filler features a 500ml cylinder, enabling a maximum fill volume of 500ml per cycle. For larger volumes, multiple cycles can be programmed. The minimum stroke is 50ml, and any volume between 50ml and 500ml can be dispensed in one cycle. The unit comes with a large 25L hopper. Optionally, it is possible to connect the system to an IBC or 200L drum, allowing for faster processing of larger batches. The machine is equipped with a foot pedal and automatic mode. In automatic mode, it continuously fills, making high-volume filling quick and efficient. With the foot pedal, operators can fill at their own pace. Depending on operator speed and fill quantity, 15–25 units per minute can be achieved, making this a very fast machine. It weighs approximately 15–20kg and is easily placed on a tabletop. The entire structure is made of stainless steel, ensuring high quality and durability. If you have any questions, please email us; we are happy to assist you with this or other machines. We also offer a labelling machine that pairs perfectly with the filling machine. We strive to respond within 24 hours and are available on working days from 09:00 to 17:30.

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours Gujdsxm Uf Sspfx Afijh

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Godpsr Dwbgjfx Afisuh Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: excellent (used), Year of construction: 2021, 1,0 St. Aufsatztrockenlufttrockener mit Material- förderer, Inhalt Trichter 50 Liter Hersteller: PLASTIC SYSTEMS Typ: DAC50N/P TCHC Gujdpfx Afsxk U Afjijh Baujahr: 2021 Inhalt Trichter: 50 Liter Trockenlufttemperatur: max. 200° C Ausstattung: 1,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS

Year of construction: 2023, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 11124, Welding fume extraction unit from "reder systems". Dimensions (L-W-H): 1700x900x2300 mm, air flow rate: 4000-6000 m³/h. Includes piping and 8 extraction arms for equipping 8 welding stations. The system is dismantled and ready for transport. Gedpfxoxl Dpqs Afieuh

Condition: ready for operation (used), Our flagship product. The D250P Depositor is used for a wide range of products and applications across many industries.   Gjdpfxjw Hnt Ss Afieuh Key Machine Capabilities Deposit range 19ml to 1363ml Maximum speed at full stroke - 68 cycles/min Maximum speed at min stroke - 250 cycles/min Additional Features Ergonomically placed controls at the front and rear of the machine Cleaning and changeover procedures require no tools Interlocked hopper and rotary valve safety circuit Machined Piston seals fit the cylinder bore for extremely accurate deposits Weight control indicator detailing the percentage of stroke Large bore Rotary Valve block to enable the processing of large particulate Moveable and height-adjustable stand with 350mm flexibility A wide range of accessories is available to suit a multitude of applications

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Gedpfx Asrf U Enjfisuh Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour Guodpfx Afju Thcveish bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Guedpfsk Aa Dwsx Afieh Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2010, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen, Inhalt Trichter 75 Liter Hersteller: PLASTIC SYSTEMS Typ: DW60 MT DISP Baujahr: 2010 Inhalt Trichter: 75Liter Trockenlufttemperatur: max. 200° C Gjdpfx Afexk Uy Rjisuh Ausstattung: 2,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS

Year of construction: 2021, condition: used, Width of the rolls; ±60 cm. Length of the inspection belt; ±275cm Godpfxoxiw Nxe Afijuh

Condition: ready for operation (used), All stainless steel construction with valve rejection system. Gedpfswvmh Hex Afieuh

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates Gujdpfexiwg Rsx Afish With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Capacity: 8,000 bph Formats: 0.75 L bottles Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection Dimensions: 318 × 152 × 235 cm Weight: 1,022 kg Scope of Delivery  Main bottle bottom inspection module Mouth integrity control Wall inspection Washing liquid residue detection Push expulsion Progressive expulsion CIP Astigarraga   Gsdpfx Afoxfccisijuh

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 30091329802, Year of construction: 2016, operating hours: 1,209 h, total length: 1,120 mm, total height: 1,070 mm, total width: 740 mm, overall weight: 211 kg, input voltage: 220 V, input current: 10 A, working width: 295 mm, working height: 142 mm, working length: 211 mm, This machine has been lightly used in our showroom and for creating customer samples. The ProJet MJP 2500 Plus produces precision rigid and elastomeric parts with true-to-CAD accuracy, a superior surface finish, and high-quality edge fidelity, making it ideal for true functional testing. ### Key Capabilities * High-Resolution Printing: Capable of printing in Ultra High Definition (UHD) mode, allowing for features as fine as 300 microns. * Precision and Quality: Delivers true-to-CAD accuracy with a superior surface finish and high-quality edge fidelity. ### Material Compatibility This printer is compatible with a wide and versatile selection of VisiJet materials, including: * Engineering and rigid plastics. * A broad range of rigid materials in clear and opaque colors. * Materials with properties that mimic engineering plastics. * Elastomers and high-temperature resistant materials. ### Common Applications * Concept modeling, form and fit testing. * Functional prototyping and fluid flow analysis. Godexg Rhcopfx Afijuh * Rapid tooling, jigs, and fixtures. * Medical applications requiring USP Class VI and/or ISO 10993 certification for biocompatibility.

Condition: excellent (used), Year of construction: 2014, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: MORETTO Typ: XD 23A Gujdjxk Ux Tepfx Afijh Baujahr: 2020 Inhalt Trichter: 380 Liter Trockenlufttemperatur: max. 200° C

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Gjdpfswm Il Uex Afieuh Shows slight signs of wear (see pictures)

Condition: ready for operation (used), Machine can spray oil or slurry on products to aid seasoning. Mesh conveyor belt is not included but we can also supply a new one. The system has eight spraying heads four on the top snd four at the bottom to fully cover the product in oil. Godpfeu Rgnnox Afisuh

Condition: good (used), Year of construction: 1999, Selling out sawmill factory! TM Systems automatic single Stenner band saw line 80 /min. All line automatic with destacking and stacking. Stenner saw VHE 105 Gsdpophqgpefx Afieuh Band 130 mm Hydraulic feed. It is possible to se line in operation at factory.

Condition: ready for operation (used), Quin Systhems PTSM322 Mini Machine Manager , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Gujdpfxoi Ecl Ds Afioh

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Gujdpewzimcjfx Afioh Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.