Used Abflammen Device for sale (11,633)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos Lsdpfexvp S Esx Ahvohd -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: used, • Type: DSH2/12V • Suction type: 150K • Year of manufacture: 2013 • Serial number: 84 • Suspension capacity: 900 kg vertical/horizontal Lhjdpfxoywi Dms Ahvsd • Each suction cup: 150 kg vertical/horizontal • Can rotate and tilt

Condition: used, Abdreharm RA 1, Abrichtbereich: aushoehlend 0,5 - 32 mm (104 - 162 mm) umfassend 0,5 - 22 mm Abdreharm RA 2, Abrichtbereich: aushoehlend 154 - 210 mm umfassend 10 - 65 mm Lhjdpfx Ae Uryzohved Abdreharm RA 3, Abrichtbereich: aushoehlend 22 - 70 mm (66 - 120 mm)

Condition: excellent (used), Tripod height adjustable Tightening thread: 1/2 Weight: 5 kg Lhjdpfxsd Ey Abs Ahvsd incl. carrying strap

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Lhsdpfx Aoc U U Udehvjd Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg Lhjdob Nv Stopfx Ahvjd

Condition: used, for Morse taper: MK 4 Lhedpjcftv Ajfx Ahvod incl. test pin, storage box

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg weight: 550 kg Lhjdpfxj Rw Nqs Ahvod height of constuction: 1000 mm

Year of construction: 1988, condition: used, machine/vehicle number: 8855, lifting capacity: ca. 300 kg Lhjdob Nwi Nspfx Ahvjd stroke: 1500 mm fork length: 4 Traggabeln, 600 mm weight: ca. 80 kg dimension: 1500 x 920 x 1340/2070 mm

Condition: used, for Morse taper: MK 3 incl. test pin, storage box Ljdpfx Ahscftvwovehd

Condition: used, for Morse taper: MK 2 Ledocftvxspfx Ahvshd incl. test pin, storage box

Condition: new, Measuring area: 75 - 88 mm Ljdpfxsd Efd Is Ahvshd

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage Lodoyv H Eljpfx Ahvohd - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Lhjdpfx Ajr D Nmkohvod Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Fully Automatic Riveting Machine, Riveting Automation, Blind Rivet Automation Blind Riveting Machine, Riveting Tool, Rivet Gun with Feeder System Blind Rivet Setter, Press Device Manufacturer: GESIPA Model: GAV 7000 Device No.: 5243052 Year of manufacture: 2002 Blind rivets up to Ø 5 mm for standard materials Blind rivets up to Ø 6 mm for aluminum Setting head diameter max. 11.4 mm Rivet shank length max. 25 mm Setting force of rivet gun 11,770 N Lhjdpeyvvkkjfx Ahved Setting stroke 16 to 20 mm Operating pressure 6 to 7 bar Rivet gun weight 2.5 kg Power supply 230 Volt, 50 Hz. - GESIPA Automatic Rivet Gun - Hydropneumatic force multiplier integrated for hydraulic rivet gun - Rivet gun equipped with Ø 2.3 mm mouthpiece for approx. Ø 4 mm pop rivets - Bowl feeder SORTIMAT, Type SM 200/280 - Spent mandrel collection container, 3.5 liters - Hose pack length approx. 3.7 meters - Riveting unit with jib assembly on an aluminum system profile base frame - Base frame is mobile on 4 swivel castors with brakes - Jib made of aluminum system profile with pivotable arm (Height = 2800 mm, Arm = 1250 mm) - BALANCER BILANCIATORE (1-3 Kg) for the rivet gun - Various accessories such as wear parts e.g. jaw sets, etc. - Operating manual Required space Length 80 cm x Width 43 cm x Height 280 cm Weight of rivet unit without base 90 kg Weight of rivet unit with base 150 kg Good condition Operating Principle – The system operates fully automatically and is designed for high cycle rates: 1. Vibratory Feeder: The blind rivets are filled into a vibratory bowl at the top of the control unit. From there, the rivets are conveyed into the feed hose. 2. Automatic Feeding: When the trigger is actuated, the next rivet is pneumatically blown into the setting head and positioned. 3. Mandrel Collection System: The spent mandrel is extracted into a collection container in the control unit via a vacuum system. Sensors monitor the fill level of the container. 4. Monitoring: An electronic control system monitors all critical functions and displays operation statuses – for example, an empty rivet supply.

Condition: good (used), functionality: fully functional, overall weight: 500 kg, total length: 1,200 mm, total width: 700 mm, total height: 900 mm, table length: 320 mm, table width: 320 mm, working length: 500 mm, LASEREVO G 05 JW Fiber Laser Marking Machine Note: The item must be collected between 12.05. and 22.05.2026 at an appointment to be agreed in advance. Lhjdoyvrwaepfx Ahvjd FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Lsdpfxjwiwnqs Ahvjhd Weight: approx. 120 kg Including cutter

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Lhodpfxowx Aado Ahvjd Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Year of construction: 1989, condition: used, Standard equipment Lhjdpfx Ahsbkacgjvsd

Condition: new, Year of construction: 2026, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm Lsdpfx Ajwktvgehvohd • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm Lhjdpfx Ajwktn Aohvod • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: excellent (used), We offer you: Embossing device for achieving form-fit connections Manufacturer: HWR Ledpsw Ra Hqofx Ahvohd Type: SOLIDStamp Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 45,000 kg, empty load weight: 3,800 kg, total length: 8,000 mm, construction width: 2,500 mm, Special equipment Condition: Ready for use and fully operational Technical condition: Very good Lhedpfx Asyn St Dehved Multi-purpose spreader for reachstacker with 27 lifting eyes and 2 support stands

Year of construction: 2023, condition: ready for operation (used), Two vacuum lifting devices from Hegla and Bystronic for the glass industry are available. 1) Hegla Isofix LN6-D90-250, year of manufacture: 2023, load capacity: 250kg, suction cups: 6. 2) Bystronic, load capacity: 350kg, suction cups: 4. Documentation available. An on-site inspection is possible. Lhjdpfx Aeyv H Hpjhvod

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Lhjdpfoyvzznox Ahvsd Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.