Used Welding smoke suction for sale (170)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Bwobvmq Sol Dw U Dswol Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, 1 extraction system, Kemper type 91, built approx. 2015, with piping Bwjbswg D Nievmq Swel

Condition: new, 2500 m³/h 2500 kPa volume capacity 1600 m³/h feed volume > 99 % 1,1 kW 72 dB(A) 0,58 x 0,58 x 0,9 m 80 kg 230 V / 50 Hz V Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the Bobvmq Ssgvq E Dswswl clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.

Condition: used, Year of construction: 2014, machine/vehicle number: 950144105510003, Lg.No. 25044 Welding mist filter system with spark pre-separator + extraction arms Technical specifications - Upright design for filtering welding mist + grinding dust - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with chromium + nickel content of over 30% - Exhaust air can be vented into the work area, e.g., for heating, or outside - TEKA control system - Air flow rate up to approx. 5000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning method with separation efficiency > 99% - Separate control cabinet Bsbewgd A Aovmq Swswl - Connection 400 V / 5.5 kW - Space requirement of filter cube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg

Condition: good (used), Year of construction: 2016, Functionality: unexamined, machine/vehicle number: 151449, overall weight: 500 kg, total width: 1,000 mm, total length: 1,500 mm, total height: 1,600 mm, volume flow: 1,200 m³/h, frequency: 50 Hz, - Connected load: 1.5 kW Bjbvmq Sswdn Ecewowl - Includes extraction system from ESTA

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: Bsbvmsvdczasq Swewl 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Bsbvmqswgknxs Swewl Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Bwjbvmjtu H N Hjq Swsl Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90

Condition: used, FP150, TBH, extraction and filter system Bobvehii Rcsmq Swowl Model: FP 150 Condition: Used

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters Bwjbvswd Nlkjmq Swol - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: used, Year of construction: 2006, filter area: 84 m², suction capacity: 4,000 m³/h, Dust extraction, welding fume extraction, self-cleaning filter, cartridge for plasma, laser, sandblasting, shot blasting. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: SULT Model: FLC 2-4 HP Year of production 2006 Engine power 4 Kw Efficiency: 2000 - 4000 m3/h Cartridge filter inserts - 4 pcs. Filtration surface 84 m2 total height - 2.95m width - 1.20m depth - 1.15m stock no.: 0987 Bobvmewgircsq Swswl

Condition: good (used), Year of construction: 1993, filter area: 212 m², suction capacity: 8,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF12cyclopeel - with pre-separator. Cartridge filter cartridges cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Bobvotrxzrjmq Swswl Cartridge filter cartridges. Fan of 11 Kw Efficiency 8000 m3/h Filtration surface 212 m2 Filter cartridges 12 pcs. Inlet diameter - 400 mm Control cabinet Dimensions: width - 2.20m x 2.10m height - 4.10m

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: Bwobvsu A Thljmq Swjl 1.00m x 1.00m

Condition: used, Year of construction: 2005, filter area: 72 m², suction capacity: 5,000 m³/h, Dust extraction, smoke extraction, external, self-cleaning filter of the renowned NEDERMAN brand. Filter ventilation, for plasma, laser, sandblasting, soda blasting, for plaster, cement, bricks, plastics and various types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. At the customer's request, we can order new filter inserts adapted to the purpose of the device. Model: FilterMax DFI 40 Fan with a power of 4 kW. Efficiency 5000 m3/h Filtration surface 72 m2 Device equipped with a frequency converter Technical documentation available. Stock no.: 0927 Bobvewfgguomq Swowl

Condition: new, Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Bebvmqsuy N S Us Swewl Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! Bwsbvmqsg Th S Aj Swel capacity 500 m3/h

Year of construction: 1995, Condition: used, Dust extractor,welding fume extractor by Herding. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Bobjpwhl Ujvmq Swjwl Capacity - 1680 m3/h

Condition: used, Year of construction: 2009, suction capacity: 37,600 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2009 Oval cartridge filter inserts - DFO ULTRA-WEB FR - 24 pcs Filtration surface 430 m2 Fan with a power of 37 kW. Fan model: ART 1001 N4 Max efficiency 37600 m3/h 30000 m3/h - 2500 Pa Inlet diameter - 630 mm Included: - noise silencer - spark arrester Bwebsvta N Hsvmq Swel - flap - dust container Also available on request are new filter inserts matched to the purpose of the device.

Condition: used, Year of construction: 1998, Mobile, stationary welding fume extraction. Dust extraction, self-cleaning filter, negative pressure NEDERMAN FILTERBOX 663 Bwebjwdhb Revmq Swsl Device with electromotive filter cleaning. Fan with a power of 1.5 kW placed on the clean side. Three-phase motor Extraction arm 3 m long. Stock no.: 0980

Condition: used, Year of construction: 2011, operating hours: 835 h, filter area: 80 m², suction capacity: 7,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter for continuous operation. For plasma, laser, sandblasting, soda blasting and all types of dry dust. Brand: DEBUS / PIONIER Model: DES DZF-1 The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The device is in very good technical condition - only 835 hours worked year of production: 2011 Fan with a power of 5.5 kW. + noise silencer Efficiency up to 7000m3/h Filtration area - 80 m2 Connector diameter 300 mm Filter cartridges - 4 pcs. Bwsbvmqjwdg Txs Swol Electrical documentation available Unit dimensions: height - 3.40m total width: 1.40m x 1.40m stock no.: 0977

Condition: used, Year of construction: 2007, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Plymovent / Euromate Model: SCS Bobjwdgq Rjvmq Swowl Year of production - 2007 Cartridge filter inserts - 2 pcs Filtration surface 150 m2 Fan in a sound-absorbing enclosure with a noise silencer with a power of 7.5 kW. Fan model: CHB16LG03 Built-in frequency converter Efficiency up to 9000 m3/h Inlet diameter - 400 mm Filtration efficiency - 99.8 % Contamination container - 100 liters Includes noise silencer and electrical documentation. Stock no.: 0842

Condition: used, Year of construction: 1998, suction capacity: 1,000 m³/h, negative pressure: 2,700 Pa, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter KEMPER. For welding, grinding, sandblasting and all types of dry dust. Cartridge filter inserts. The filter is cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 1.5 Kw Capacity 1000 m3/h Negative pressure 2700 Pa Cartridge filter inserts 2 pcs. Bsbowdfzuevmq Swowl Stock no.: 0978

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. 4 Kw fan. Capacity - 3600m3/h Bwsbvjrwm Izomq Swel year of production : 2003

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Bsbvsvrgbtemq Swswl Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: not inspected (used), Welding fume extraction,dust extraction,self-cleaning filter,pneumatic,vacuum. For welding,grinding,sandblasting and all kinds of dry dust. Cartridge filter cartridges. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan of 3,2 Kw Bebvmsip Nkteq Swowl Efficiency 1600 m3/h