Used Cnc Flame Cutting Machine Plasma for sale (65,962)

Condition: used, Year of construction: 2008, CNC gantry plasma cutting machine with oxy-fuel Manufacturer: ESAB Model: SXE P1 4500 Ncsdpfxjyc Nclo Ad Nsl Year of manufacture: 2008 CNC control 3 oxy-fuel torches 1 plasma torch with Kjellberg HiFocus 160i power source Without table and filter! 25126

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm Plasma rotator "MasterCut" with fully automatic support ACTG automatic calibration unit for the bevel cutting assembly Kemper extraction system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut for bevel cutting programming Other technical data: MicroStep machine control with MMI console and 24" touchscreen iMSNC Expert System module iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD operating unit on the gantry Laser pointer with automatic offset transfer USB 3.0 ports for storage media MicroStep RemoteDiagnostics remote maintenance module Grate cover in the cutting table Reinforced version of the cutting table Connection of high-precision plasma source to CNC control Control of automatic gas console Nodpfxsxu U Ddj Ad Njcl Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety system (collision protection) for the gantry bridge with emergency stop Smart Z Movement ACTG Calibration Report Fully automatic oxy-fuel torch support Automatic gas console for oxy-fuel torch (cutting gas acetylene) Active collision protection

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m '”MasterCut” plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Ncodpfexnmbnex Ad Njl TEKA filtration system ä21126

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Rail length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm Njdew Rpvbopfx Ad Nocl 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatic rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filtration system Downflow 3DFP9-SP Power: 9 kW Laser diode 21126ä

Condition: used, Year of construction: 2020, CNC portal plasma cutting machine with skew rotator bevel unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator bevel unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm separation cut Extraction table Beuting without filter system Software: Omniwin with Bevel ä21126 Ncedsx Dlwmjpfx Ad Njl

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Beuting oscillating conveyor table Donaldson DFPRO12 filtration unit for outdoor installation Nsdpsu U Hm Ajfx Ad Necl

Condition: good (used), Year of construction: 2008, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Exhaust table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter unit: Z-Line 9 ZDC Own technicians available for assembly, commissioning, and training! Njdpfeiff Daex Ad Nocl All spare parts in stock

Condition: good (used), Year of construction: 2007, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control Nedsuv Hkgopfx Ad Njcl 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Donaldson Torit DCE filtration unit

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Model: ACK-2D Ncjdow El Udepfx Ad Nol Year of manufacture: 2006 CNC control: NBS300 Working table: 1.5 x 6 m 2 oxy-fuel torches

Condition: good (used), Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Messer Model: Easytherm 4600 Year: 2006 Control: Global Control Working area: 3 x 9 m No table included!! Table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Nodpfx Asivz A Rjd Njcl Incl. marking system Torit filter unit Own technicians available for assembly, commissioning, and training! All spare parts in stock. 21126ä

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Nodpfxsgqkc Ns Ad Necl Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm Ncjdpfx Adeyay H Ao Nsl 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software at the CNC control 20126 Availability: May 2026

Condition: used, Year of construction: 1995, CNC Gantry Oxy-Fuel Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC Control: Global Control Plus Track gauge: 7,000 mm 8 x Oxy-fuel torches type ALFA 8 x Omnilift 200 Without rail track Njdpfx Adsyay Dhe Necl Without table Without filter 21126

Year of construction: 2017, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, can also be used as a plasma cutting machine but is without accessories Manufacturer: ESAB, Flame cutting system, flame cutting machine with accessories Type: Crossbow -Cutting length: up to 3100 mm -Cutting width: up to 1525 mm Technical data: see photo datasheet Ncedpfjx Tfdbjx Ad Nol -Transport dimensions: 4000/650/H410 mm -Weight: 96 kg

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Nsdpfxotp Dhpe Ad Necl  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Ncsdpfsvpalajx Ad Nsl ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, For sale is a Zinser CNC plasma cutting machine with Hypertherm HBR 130 xd power source and accessories. The system is equipped with an angular head and consists of both a flatbed and a tube processing unit. Ncodpfexpwzuex Ad Njl

Condition: used, CNC flame cutting machine BACH type ACW 2500 Ncjdpfsf Ncadex Ad Njl Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: Legas F6020, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: documentation/manual, emergency stop, For sale: a CNC plasma and oxy-fuel cutting machine currently in operation in Hungary. Ncedpfx Aoxala Hed Nsl

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Ncedpfefwmrpsx Ad Nel Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Nedpfx Adsri Skaj Nscl

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Njdpow Azu Iofx Ad Nscl

Condition: good (used), Year of construction: 2011, Machine-Details: Stock-No. 1022-E06337 Type of machine Flame-Cutting Machine Make SATO Type Satronik D4500 Year of manufacture 2011/2008 Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis Ex site, loaded on truck Technical details: gangway length 14000 mm working width 3700 mm burner heads 6 Control CNC 802 Additional information: Used oxyfuel cutting machine with semi-automatic gas control and 6 oxyfuel torches Working width 3700 mm Track width 4500 mm Overall width 5320 mm Overall height 2100 mm Height above floor to bottom edge of torch support on track beam mounted 1300 mm, floor-mounted without beam 1000 mm Track length 16000 mm on HE 300 B beam Oxyfuel burner: 6 pieces with MS 832-250 blades Burner carriages: 6 pieces, maintenance arm mounted on round bar Burner height adjustment: 6 pieces E 260 with 260 mm stroke Ncodpfxjydc I Ro Ad Njl Maximum cutting thickness with 4 torches: 300 mm Maximum cutting thickness with 6 torches: 200 mm Feed speed: 12000 mm/min CNC 802 control with vibration-resistant flash memory Semi-automatic gas control via proportional valves 96 macros (modifiable standard shapes) Easy to learn USB interface CNC Cut software for importing and converting DXF files 15" screen behind shatterproof, scratch-resistant glass, operable even with gloves. Note: A burner table and an extractor are not included in the scope of delivery.

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Ncsdpfxoqmmkcs Ad Njl Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2000, CNC gantry plasma cutting machine Manufacturer: Messer Model: Omnimat L5000 Year of manufacture: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel torches Nsdpehwtn Ijfx Ad Nscl Without table Without filter