Auto edger buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
15
Cwdk0lc7 Bord edger Ahlstrom SS9 speed up to 225 m/min Min bord lenght 2400 mm Max width 600 mm Max thickness 55 mm more
6

automatic edger line Esterer Combimes

Reutlingen, GermanyGermany dealership location
6676 km
1989
good (used)
Automatic edger line Esterer Combimess Type - DK 50, right machine. Year of construction - 1989. Edger - DK 50 B Main drive - 50 kW Board length - 1.0 - 5.0 m Width of board - 60 - 600 mm Axle adjustment: hydr. servo cylinder 90f2oovws Complete extensive mechanization incl .: - feeder traverse conveyor approx. 50 meters in front of the increaser, - Board separation increaser, - continuous crosscuting, board alignment, - Automatic infeeding system, type ARS - Autfeedig with spre... more
1
Edger FR8 SRM Left Main engine - 55 kW Board length - 1.0 - 5.0 m Board width - 60 - 700 mm Cutting height - 18 - 100 mm Edging width - 48 - 470 mm Axle adjustment: hydr. Servocylinder Complete mechanization incl.: - Transverse conveyor in front of the increasing conveyor, - Board separation increasing conveyor, - Continuous capping, board alignment, - Automatic feeding system H-80 with mechanical alignment kinematics, 9 pairs of straightening arms, 9 clamping axles, 6 hydraulic pressure rolle... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Pusher fence variable speed 0 - 25m/min forward, 40m/min return Bczupgru3f Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Pusher with 5 panel grippers and 2 stops Touchscreen con... more
5
saw blade diameter:400 mm cutting diameter:130 mm Bu2mipxl stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm max. material thickness:20 mm min. material thickness:1,5 mm Gvyz7l2x8 Mubea plate punching machine with coordinate table and CNC control. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more


auto edger
daily

New machines via email!

Stay updated!
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Bcztu9kfzn Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Max cutting he... more
3

PERFECTA Dreimesserautomat CIRCUT F

Espelkamp, GermanyGermany dealership location
6453 km
2004
ready for operation (used)
Legal imports Bcr8zuy7h0 more
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm Srnyhk turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min Dkdve9sp8 coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg more
6
Blade diameter (mm) 350 / 400 / 450 Din 8576 Blade lock (mm) 50 / 4 / 14 / 80 2hdkd7isb 40 / 4 / 1 1 / 63 Cutting capacity at 45 (without magazine) Circle 100 /125 / 145 Square 90 / 110 / 130 Rectangle 14070 / 16090 / 180100 Working height (mm) 1.050 Machine weight Kg. 2.800 more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm D8yb9qmp3 capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the mac... more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm Uqvqibp7u work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Zi8lntk Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm Cnb8uaxs capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at ... more
3

Chuck AUTOSTRONG N 210

Mönchengladbach, GermanyGermany dealership location
6371 km
2011
used
diameter:210 mm total power requirement: kW weight of the machine ca.:0,05 t turning speeds:4200 Bore:75 mm clamping diameter:254 mm dimensions of the machine ca.:0,6 x 0,5 x 0,4 m Gzv3l2atu 3-jaw power operating chuck with draw pipe and various jaw sets. more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Glvuqlgls BALESTRINI C 70 Double Sided Feed Through Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. wo... more
1
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm Uqvp8qkjt feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - Hp0w7obwc spindle passage - mm turning length - mm Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW 3gtisvayf weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Qmo9zdlkm Roller con... more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Ccskufx Blade diameter: 250 / 350 mm Angle range: +/- 60 degrees min. cut capacity : 12 mm round cut capacity : max 100 mm Max cut Lenth 3000 mm Feeder 6000 mm plus more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dmjlzo2 VOORWOOD A117B Shape And SandFeed through, single-sided Profile Shaper/Sander with CPU readout; feeds from right-to-left;. Specifications: -- 2-3/4" x 2-3/4" Min. part size, 3/8" - 1-1/2" max. thickness, and 1-3/4" max. profile faceEquipped with: -- (3) 5 HP Belt driven Shaping station -- (4) 1 HP - 1,500 RPM Disc sanding stations; 0° - 45° tilting on all units. -- 18 FPM Fixed feed speed, 1 HP feed drive; overhead holddown with (2) rows of t... more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm band length 450 mm cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm dimensions of saw-blade 450 x 40 x 2 mm total power requirement 3,7 kW weight of the machine ca. 1,1 t Izdymdh - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm turning length - mm Bcy8m3o9kd bore depth - mm Accessories: Turning sets, various tool holders, collets, feed pliers more
6

Automatic Punching Press IMS PHY 45

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
pressure 45 t no. of strokes 27/13 Hub/min sheet width - mm Bctbcvrco2 weight of the machine ca. - t more
4

shaper Martin T21 mit automatischer Motorbremse

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1980
good (used)
Type: T21 used machine motor power: 6kW speeds: 3000/4500/6000/9000rev / min spindle diameter: 30 mm long tables Cp2knc98 Year of construction: 1980 Location: Warehouse / 82281 Herrnzell more
5

Auto bar loader Iemca PRA 40/44 P

Brembate di Sopra, Bg, ItalyItaly
6844 km
reconditioned (used)
Iemca PRA 40/44 P 2ra7hq In 2016 rebuilt more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bbuznox3h7 CAMERON AUTOMATION #37A-12L-R-220 QUICK CHOP Saw Optimization System includes: Saw Frame, Computer, Luminescence Sensor, Servo-Motor, Crosscut Solutions Cut-Off Saw.. -- Size Capacity: 2" X 8" wide max. x 1' to 12' max. incoming board length capacity. Highly accurate Push-Feed Saw, left-hand version (material feeds from right-to-left), 10' infeed. -- Drive/Servo: Equipped with: 7-1/2 HP Arbor motor and mechanical up-cut saw stroking fo... more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm feed length: multiple 9999 mm cutting speed 17 - 127 m/min Uqvwqkgcj control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
4
turning diameter over bed 125 mm spindle passage 10 mm turning length 100 mm turning speed range 1000 - 10000 U/min Boring depth max. 70 mm speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m F7jrsj2 Bar feeder IEMCA CS112/42/CT more
6

Laser Cutting Machines Bystronic ByAutonom 3015

Gammertingen, GermanyGermany dealership location
6690 km
2013
used
Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10000 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Bb9qlixt8t Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA more
3

STANGENLADER IEMCA TAL 65 / 44 Auto

Bruchsal-Büchenau, GermanyGermany
6601 km
1995
excellent (used)
STANGENLADER IEMCA TAL 65 / 44 AUTO - 27-03-007 Lieferzeit: sofort Nummer: 27-03-007 Hersteller: IEMCA Typ: TAL 65 / 44 Auto MASCHINENDATEN Baujahr: ca. 1995 L x B x H: ca. 5000 x 1000 x 1500 mm Gewicht: ca. 490 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Steuerung: über CNC - Maschine Bcyoduwppo Stangen - Durchmesser: ca. Ø 5 - 65 mm Stangenlänge: ca. 4400 mm Höhenverstellung: ca. 1000 - 1300 mm Stromversorgung: ca. 380 Volt Max. Vorschubweg: ca. 4600 m... more
9
Main spindle Max. Turning Diameter 16 mm Max. Headstock stroke 310 mm Max. Drilling capacity stationary Tool 8 mm Max. Tapping capacity stationary Tool M8 Spindle speed 500-10000 rpm Main spindle motor 3.7 kW, Continous 2.2 kW Main spindle bore Dia. 20 mm Max. Turning federate X, Z-axis 6000 mm/min Rapid feed rate X=12000 mm/min, Z=16000 mm/min Tool post 9 Tools, 12 mm x 95-115 mm Endworking attachment 3 Tools Sub spindle Spindle speed 400 -6000 U/min Spindle motor... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbwozn0oxa BALESTRINI C 70 Double sided Shaper -- Automatic feed through shaper profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation; reversing rotation by switch for climb cut or conventional cut. Specifications:... more
5

Buegelsaegeautomat unbekannt 350 mm

Wiefelstede, GermanyGermany dealership location
6385 km
used
M0kkb more
5
cutting diameter:400 mm Hqieclhdc saw band length: mm cutting width: mm total power requirement:6 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,74 x 2,18 x 2,03 m speed:20 - 110 m/min capacity 90 degrees: square:400 x 400 mm capacity 90 degrees: round:400 mm capacity 90 degrees: flat:400 mm length:1290 mm width:2490 mm height:Oberteil in Höchststellung 1911 mm adjustment of height - one roll:Oberteil abgesenkt 1721 mm motor capacity:4 KW dimensions of saw-band:5090 x 41 x ... more
3
cutting diameter 500 mm capacity 90 degrees: square 500 x 500 mm Uqvtq8nz9 saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more
1

BANDSÄGEVOLLAUTOMAT FORTE SBA 240

Bruchsal-Büchenau, GermanyGermany
6601 km
1975
good (used)
BANDSÄGEVOLLAUTOMAT FORTE SBA 240 - 19-03-033 Lieferzeit: sofort Nummer: 19-03-033 Hersteller: Forte Typ: SBA 240 MASCHINENDATEN Baujahr: ca. 1975 L x B x H: ca. 1900 x 1600 x 1650 mm Gewicht: ca. 1000 kg Guter Allgemeinzustand TECHNISCHE DATEN Sägebandabmessungen: ca. 3660 x 27 x 0,9 mm Gvonfk Schnittbereich: Rund: ca. Ø 250 mm Vierkant: ca. 250 x 250 mm Flach: ca. 270 x 250 mm Automatischer Materialvorschub: ca. 3 - 400 mm Mehrfachvorschub: Nein Materia... more


auto edger
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTO EDGER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close