Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Hodsxq Akwepfx Adash Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Year of construction: 2004, condition: ready for operation (used), Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible. Hedpfxexwywus Adaoh

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Hjdpfx Adoxwyv Roajh

Condition: excellent (used), functionality: fully functional, We are offering used various 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment is possible. Hedpfx Adexqn Ubjaeh Pos 1 System 3R-203 Rotating Unit WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height Adjustment Adapter WEDM Pos 9 System 3R-218/30S Holder Sets Pos 11 System 3R-602.21 Manual Chuck Macro Pos 12 System 3R-294.3 Vice Pos 14 System 3R-292.3 SuperVice Pos 15 System 3R-293.3 SuperVice Pos 16 System 3R-292.06 HP SuperVice Magnum Pos 17 System 3R-200-4J-2 470 mm System 3R-200-4J-2 470 mm System 3R-200-4J-2 330 mm System 3R-200-4J-2 138 mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection available!

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Hsdexqnqvopfx Adash Shipping and viewing possible!

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 709863, overall weight: 828 kg, Specifications (Hot and Cold Side) PS max: 10bar TS min: 0°C TS max: 110°C V: 39L PT: 13bar Fluid group:2 Hjdpfx Aswrh I Hodaoh The Funke plate heat exchanger FP405-61-1-N-0 is a high-quality device that efficiently transfers heat between two media. Its innovative design allows effective and reliable heat transfer in various industrial applications. The heat exchanger is characterized by its robust construction and easy handling, ensuring a long service life and low-maintenance operation. It is ideal for use in heating, cooling, or process systems where efficient energy use and precise temperature control are required.

Condition: excellent (used), Year of construction: 1996, General Characteristics Total weight: 5,000 kg Maximum height: 2,900 mm Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Positioning resolution: 0.001 mm Min/max traverse speed XYZ: 0/900 mm/min Standard glass optical scale Work Tank Dimensions (LxWxH): 1,500x1,000x600 mm Table dimensions: 1,200x800 mm Maximum distance between table and electrode holder spindle: 230/730 mm Table-to-floor distance: 750 mm Electrode Electrode weight on Z-axis: - Interface system: 350 kg - With C-axis and spindle: 50 kg Workpiece Maximum workpiece weight on table: 4,200 kg Maximum workpiece dimensions: 1,450x950x500 mm Dielectric Tank Hsdpfx Adoxwmbtsaeh Capacity: 1,600 l Filtration system: paper filter Work tank capacity: 1,050 l Generator Maximum working current (peak): 128 A Pulse type: ISOPULSE Machine equipped with: • Multifunction remote control • Measuring cycles • Contouring • PROGRAM EXPERT 2 • PILOT EXPERT 2 • SPAC generator Year of manufacture: 1996

Condition: like new (used), Year of construction: 2003, X-axis travel: 1,500 mm Y-axis travel: 750 mm Z-axis travel: 500 mm Working table height: 820 mm Clearance: 920 mm Max workpiece weight: 100,000 N Max head load: 4,000 N Tank model: fixed Hsdpfoxwma Aex Adaoh Tank dimensions: 2,300 x 1,300 x 700 mm Worktable: 1,700 x 1,000 mm Usable dielectric height: 620 mm Generator Minimum standard surface roughness: VDI=0 Power: 60 A The machine includes: • Generator with Expert System 120 A • Fixed work table 1700x1000 mm • CNC for simultaneous axis control • Integrated ONA C-axis with automatic System 3R Macro Standard clamping • Ecological filter with automatic cleaning cycle • Dielectric temperature thermocontrol Year of manufacture: 2003

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travel: 1,200 x 800 mm U and V axis travel: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.3 mm Simultaneous controllable axes: 4 (X, Y, U, V) Motors: AC motors on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg Filtration system Capacity: 3,000 L Conductivity control: automatic Resin capacity: 14 L Temperature control: automatic Dielectric cooling system: chiller Generator Power circuits: Mosfet AC Minimum roughness: Ra 0.35 Cutting speed: 360 mm²/min (with 0.3 mm brass wire) Automatic wire threading: standard Power supply: 400V three-phase CNC Hardware: Industrial PC, 64 bit Memory: 1 GB Display: 15” TFT touchscreen Data input: keyboard, RS 232, floppy, LAN, USB Positioning system: closed-loop servo-assisted Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm Machine equipped with: • Optical scales on X and Y axes • 600 mm Z axis • Coil holder for up to 50 kg spools • 1 set of 0.25 mm guides Hjdpfexwmacsx Adaeh • 1 set of 0.30 mm guides • Taper cutting system • Automatic wire threading and re-threading after breakage • Clamping system: frame with universal drilling • 64-bit CNC with 16 GB memory • AC power generator with anti-electrolysis device • Automatic technology generation • Serial interface, floppy drive, LAN, USB • Dielectric unit with automatic demineralization system • Chiller Year of manufacture: 2018

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 573385, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Y-position electrode changer: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Digital resolution: 0.001 mm C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Worktable: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Hodpfx Aoxwkttsdajh Filter surface area: 4 m² Lifting tank: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: double magazine Number of electrodes: 182 Gripper: dual gripper Workpiece pallet magazine: 8 units Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Footprint: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: used, Year of construction: 2012, Travel distance: X 500 mm Y 350 mm Z 300 mm Hedpfx Asuu Dl Rsdaeh Water bath machine Automatic wire threader

Year of construction: 2019, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 750 mm MAX ELECTRODE WEIGHT: 200 Kg MAX  PIECE WEIGHT: 15000 Kg TANK SIZE: 2300 x 1300 x 850 mm TABLE SIZE: 1700 x 1000 mm Hedpfxewl R Dks Adash TOOL MAGAZINE: 22 POS WEIGHT: 14600 Kg ACCESSORIES: C-AXIS ; PORTABLE HANDWHEEL NOTE: MAX PIECE HEIGHT 700 mm

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Hsdpfx Adoxcqqpjash Y-AXIS TRAVEL: 300 mm MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Year of construction: 2012, condition: ready for operation (used), - USED - DOUBLE HEAD CNC DIE SINKING EDM X-AXIS TRAVEL: 3000 total - 2000 single mm Y-AXIS TRAVEL: 1500 mm Hodpewl R A Hofx Adajh Z-AXIS TRAVEL: 1000 mm RAPID FEEDS X-Y-Z: 2 - 2 - 7,5 m/min MAX ELECTRODE WEIGHT: 200 Kg MAX  PIECE WEIGHT: 20000 Kg TANK SIZE: 4000 x 2000 x 1250 mm TABLE SIZE: 3200 x 1600 mm TOOL MAGAZINE: 13+13 POS WEIGHT: 32550 Kg OVERALL DIMENSIONS: 6640 x 5800 x 4120 mm ACCESSORIES: C-AXIS NOTE: MAX PIECE HEIGHT 1130 mm

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Classic 2S Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Hodpsuzvkgefx Adajh Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system Hsdpfxsxpvhas Adajh - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), functionality: fully functional, We offer various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment is possible. Pos 1 System 3R-203 Rotary Unit WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height Adjustment Adapter WEDM Pos 9 System 3R-218/30S Holder Sets Pos 11 System 3R-602.21 Manual Chuck Macro Pos 12 System 3R-294.3 Vice Pos 14 System 3R-292.3 SuperVice Pos 15 System 3R-293.3 SuperVice Pos 16 System 3R-292.06 HP SuperVice Magnum Pos 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm System 3R-200-4J-2 330mm System 3R-200-4J-2 138mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Hjdpfx Asxpvgcedaoh Shipping and inspection available!

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Hedpfjvmgdksx Adaoh Shipping and viewing possible!

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Hjdoxphvcopfx Adaeh

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Hedow S I Dgjpfx Adaoh Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 9710C365, workpiece weight (max.): 250 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, controller model: FANUC SERIES 16-W, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances Travel X-axis: 320 mm Travel Y-axis: 220 mm Travel U-axis: 120 mm Travel V-axis: 120 mm Travel Z-axis: 180 mm Hsdpfxjxnl Umo Adaoh Max. workpiece weight: 250 kg Feed rate in X and Y axes: 900 mm/min In U, V and Z axes: 450 mm/min Table dimensions: 530 x 330 mm MACHINE DETAILS Control: FANUC SERIES 16-W Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,400 mm Weight: 3,000 kg EQUIPMENT Coolant tank

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Hjdpfx Aoxnkblsdaoh Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Hjdpfx Aoxni T Hodaeh Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 20369, table width: 400 mm, table length: 570 mm, controller model: POCON 60, empty load weight: 6,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Bidding obligates you to collect the item on time between December 1, 2025, and December 5, 2025! Hjdpfx Asxm Sf Nodaeh TECHNICAL DETAILS Table width: 400 mm Table length: 570 mm Magnet dimensions: 260 x 150 mm Control unit: POCON 60 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kVA Dimensions & Weight Dimensions: 3,500 x 3,000 x 2,600 mm Weight: 6,000 kg EQUIPMENT - 4 T-slots - Clamping system - Magnetic clamping plate - ZIMMER + KREIM electrode changer system - Electrode holder - 50-position electrode changer - Storage system with various clamping plates - 2 tool trolleys with suitable electrodes and clamping systems

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg U+V-Axis +/- 21 mm Hodpfx Aexl A Aisdajh Misc. accessories MARCELS MASCHINEN AG