Used other EDMs for sale (27)

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm Lrsdpfx Adeycckce Nsg workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Ledpfx Aox Tqfksd Njrg

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) Lredpsxx Nkysfx Ad Nog # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Year of construction: 1995, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 230 mm, table length: 650 mm, table width: 550 mm, machine/vehicle number: MB-9501B1, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 230 mm Table dimensions: 650 x 550 mm MACHINE DETAILS Control system: MULTITRON PS 1800 Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,000 x 2,400 mm Weight: 2,000 kg Lredpfx Ajxqqcued Nsg

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system Lredpfxex Dahao Ad Njg This machine is part of an online auction.

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Lrjdpfx Aoxwmiksd Njg Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Lredpfx Asx Hz Shod Neg

Year of construction: 1989, condition: used, Erodiermaschine, gebraucht Baujahr: 1989 Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at) oder Lrjdpfxjit Rqie Ad Nog *

Year of construction: 2004, condition: repair required (used), X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm Workpiece: X: 1300 mm Workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2,300 kg Main electronic connection: 400 V / 50 Hz / 3P Total power requirement: 10 KVA Air pressure: 6 bar Dielectric tank: 250 liters Technical attributes Z-motion: 400 mm X-motion: 800 mm Y-motion: 600 mm Weight approx.: 4,700 kg Approx. onsite dimensions (L x W x H): 1,950 x 2,550 x 2,000 mm. Manuals and documentation included. Not working; we suspect the power supply. Mechanical condition is very good. Lrsdpfxsx Hxikj Ad Nog

Year of construction: 2017, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories: Total enclosure Ljdpjxy Ry Ssfx Ad Nerg External PC incl. CAD/CAM and ExLevel Pro software Software package with additional functions for metalworking tools, Wheelchanger for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63-A-E Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Glass scales on the X, Y & Z linear axes, Mechanical mist separators N280, 3 grinding wheel change elements Test mandrel HSK63A. Also available with workpiece magazine as an option! Workpiece outer diameter: max. 320 mm Tool outer diameter: Max. 200 mm workpiece length: max. 250 mm Bore diameter: Max. 60 mm Travel path X1: 520 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis A1: 360° Rotation range axis B1: +/-20° Rotation range axis E1: 210° Grinding spindle speed: stepless 0 - 4500 rpm (torque 6Nm) Connected load: approx. 8.7 kVA/ 6.8 kW mass: approx. 7100 kg Dimensions: W x D x H = 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Year of construction: 2015, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure, Software for woodworking tools Software for P-system peeling cutters Software for scoring saws/radius cutters Software for 360° path programme Software for 360° peeling cutters Workpiece magazine N250 (pallet magazine for max. 28 workpieces), Disc changer for up to 6 eroding/grinding discs, Adaptation to A-axis on HSK 63- F, Coolant system with pump & cooling unit Automatic central lubrication Automatic fire extinguishing system Automatic shut-off flap Gripper fingers for workpiece automation, 4 workpiece holders for workpiece magazine, 1 exchange element with flushing kit, Mechanical mist separator N183, Lredpfxsxy Ryrs Ad Nog Test mandrel HSK63F. Maximum workpiece outer diameter.: 320 mm workpiece length: max. 250 mm Travel path X1: 520 mm Bore diameter: Max. 60 mm Travel path Y1: 970 mm Travel path Z1: 420 mm Rotation range axis E1: 210° Grinding spindle speed infinitely variable: 0 - 4500 rpm. Rotation range axis A1: 360° Rotation range axis B1: +/-20° Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz) Weight approx.: 7100 kg Dimensions L x W x H: 4012 x 2889 x 2611 mm colour: RAL 7047 telegray 4 / RAL 7045 telegray 1

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Lsdpex Dcarsfx Ad Norg

Year of construction: 2004, condition: ready for operation (used), Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible. Ljdpfx Adjxwywuj Norg

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Lrodpfx Adexwyv Re Njg

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Lrodpfx Aow S I Dgsd Nog Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, functionality: fully functional, machine/vehicle number: 1270, Year of construction: 1999, DISINTEGRATOR FOR SPARK ERODING BROKEN DRILLS AND TAPS - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V Ledjxniv Uopfx Ad Nerg - 10 kVA - 15 A - 50 Hz - Serial No. 1270

Year of construction: 1991, condition: good (used), Description: - X x Y x Z axis travel: 200 x 300 [mm]. Lrjdpegktifefx Ad Njg - table size: 250 x 350 [mm] - max. weight of the workpiece: 100 [kg] - max. diameter of electrode: ~ 0,3 ~ 3,0 [mm] - floor space: 860 x 830 x 1990 [mm - weight: 500 [kg]

Year of construction: 1985, condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Ledpfxjdy Dw Ej Ad Norg Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Ljdpfx Adep R R Ids Njrg

Year of construction: 2002, condition: ready for operation (used), Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available. Lrsder Nd Enopfx Ad Nsg

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Lrodpfx Adjuyk Rlo Neg

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Lrodpfxjvc Ha Rj Ad Neg

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Ledpfxow S Tygj Ad Nerg

Year of construction: 1988, condition: ready for operation (used), Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible. Lsdpfx Aow Tc R Ded Norg

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Lredpfx Ajwdwztjd Nsg