Used Hpr 260 Xd for sale (2,954)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Iedpfx Aezibqasbnoif Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Isdsvamq Depfx Abnjif

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Isdpjztap Ajfx Abnsif Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Iisdpfxozhu I Aj Abnef Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Iijdpfx Abezn N T Tonsf Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! Iijdpsl Dw T Asfx Abnof - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max temperature: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, Iiodjzh D Dyspfx Abnof . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . .

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x shelf connector, used Material color: Sendzimir galvanized Total length: approx. 260 mm Clear width: 197 mm Profile dimensions: U 50 x 12 mm Number of holes: 2 pcs Hole diameter: approx. 11 mm Weight/piece: 0.244 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Iisdpfx Aehhymdjbnef Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet of vehicles (without unloading)

Condition: used, Collets in special size – suitable for Weiler 260 and Leinen 140 – package price: EUR 250 net Iiedpfx Abozd Uq Njnef

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 Isdpfowhk E Hex Abnoif 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Clamping force: 260 t Type: Multicomponent Drive: Hydraulic Iedpezu Smijfx Abnsif Machine is including robot and conveyor belt

Condition: used, mileage: 74,777 km, power: 77 kW (104.69 HP), first registration: 05/2017, fuel type: diesel, overall weight: 2,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,981 mm, loading space length: 2,411 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0499. HM28441 ----EQUIPMENT * Fixed tow hitch * Audio system * Seat Package 4 - Partition (with load-through flap), without window (Custom truck base) - Driver's seat, 4-way adjustable (fore/aft, backrest, tilt, height) - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Interior armrest for driver - Seat covering: fabric - Partition (with load-through flap), without window * Transmission: 6-speed manual * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag, driver side * Exterior mirrors, manually adjustable (2) * Battery (80 Ah) * On-board computer with consumption and mileage information (e.g., remaining range) * Roof, flat * Headliner in driver's cabin * Double-wing rear door with 180° opening angle (without window) * Tachometer * Electronic Stability Program (ESP) with Traction Control System (TCS) - Hill start assist - Crosswind assist - Emergency brake assist - Rollover protection * Power windows * Paint: Solid color * Load compartment lighting with activatable delay shut-off - after 30 minutes * Particulate filter: Diesel particulate filter * Headlight low beam with delay shut-off * Sliding door: Sliding door, right * Mud flaps, front and rear * Side protection strips * Power steering * Emergency Brake Assist (EBA) * Seat belts - Seat belt pretensioners and force limiters, front - Warning system for driver's seat belt not fastened Ijdpfx Ajzu D H Isbnjif * Recirculation mode * Tie-down points - in the load compartment floor * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, cutting diameter / mm saw band length / mm cutting width / mm Manufacturer: KASTO Type: SSB 260 VA Machine type: Fully automatic band saw Design: Hydraulic, automatic feed Cutting range (round): approx. 10–260 mm Cutting range (square): approx. 260 × 260 mm Minimum cut length: approx. 5 mm Ijdpozu Dausfx Abneif Automatic feed: approx. 600 mm Multiple feed: up to approx. 5,400 mm (depending on version) Cutting speed: approx. 15–125 m/min, infinitely variable Saw band length: approx. 4,115 mm Saw band width: approx. 38–41 mm (depending on version) Saw band thickness: approx. 1.0–1.3 mm Saw motor: approx. 4.0 kW Total connected load: approx. 6.5 kW Machine weight: approx. 2,000–2,200 kg Dimensions: approx. 2,160 × 2,080 × 2,015 mm (depending on version) SUBJECT TO CHANGE AND WITHOUT GUARANTEE – TECHNICAL DATA

Condition: used, mileage: 309,196 km, power: 552 kW (750.51 HP), first registration: 12/2017, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,700 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, central locking, cruise control, differential lock, full service history, power mirror, trailer coupling, - 2 bunks - ACC - adaptive cruise control - AP axle - Work lights - Heated exterior mirrors - Roof lamp bar - Extra cab insulation - Air-suspended driver's seat - FMS interface (Fleet Management System) - Transmission oil cooler - I-Park Cool - auxiliary air conditioning - Automatic climate control - Cool box - Auxiliary drive on the engine - Radio CD MP3 Bluetooth - Rotating beacon - Disc brakes - Side spoilers on the cab - Sun visor - Toolbox - TV - VEB+ and retarder - Xenon headlights - Additional headlights - Additional frame extension behind the cab Ijdpozu Nmyjfx Abnoif Volvo FH16 750 8x4t for 260 tons Diesel engine 16.1 l, 751 hp/552 kW, 3,550 Nm I-Shift ATO3512F, automated 12-speed gearbox with overdrive, max. 3,550 Nm Two additional crawler gears, slow & very slow FH16 Globetrotter XL cab Gross Combination Weight (GCW) 260 t FH 8x4 tag axle, VLA tridem VEB+ (Volvo Engine Brake+) Retarder Electro-hydraulic steering, VLA liftable Work-Remote/wireless remote control, multifunctional I-Park Cool (Integrated auxiliary air conditioning with automatic temperature control) 1107WHIT Traffic white Driver comfort++ FH16 Cab suspension: Air Leather steering wheel Part-leather seats Driver's seat comfort, air-suspended, heated, ventilated, seatbelt in seat Comfort rest seat, rotatable, tiltable Armrests covered with leather, two armrests each on driver's and passenger's seat Interior sun visor, electric roller blind Auxiliary cab heater, 2 kW 2 bunks rest package+ FH/FH16 Storage compartments rear/top, content: 154 l Shift console (luxury) on bunk (interior light, heating/air conditioning, sunroof, door, alarm clock, window and radio) Interior lighting with dimmer and red night lighting Roof window and emergency exit, electrically operable (tinted glass) Cool box 33 l, with freezer compartment, under bunk Additional thermal insulation of cab rear and side walls Audio High: Radio with CD player, Bluetooth etc. 8 loudspeakers: 4 in dashboard, 1 in each door and 2 in the sleeping compartment Preparation for TV/infotainment Telematics gateway with 3G and WLAN Adaptive cruise control (ACC) with collision warning Cruise control; including brake cruise control Load/axle load display Driver alert system Lane departure warning Connection for external FMS systems Electrical interface for bodywork with body builder module Roof arch for accessories, front Globetrotter sign lighting LED warning lights, front on roof arch LED flashers in front grille Bi-xenon headlights with dynamic cornering light LED fog lights, front LED cornering lights LED reversing/work lights rear (left & right) LED fifth wheel coupling lighting LED tail lights I-Shift ATO3512F, automated 12-speed gearbox with overdrive, max. 3,550 Nm Reinforced gearbox Two additional crawler gears, slow & very slow Transmission oil cooler, very high performance, air/oil (over 80 t GCW) Two additional reverse crawler gears Rear axle load (technical) max. 35 t Drive axle RTH2610F, hub reduction Drive axle ratio 4.12 : 1 Electro-hydraulic steering, VLA/NLA Front lift axle Parabolic suspension front, 2 leaves Air suspension...

Condition: ready for operation (used), Heraeus MR 260 Annealing Furnace Internal dimensions: 260mm x 500mm x 160mm (W x D x H) Space required: 1100mm x 700mm x 1560mm (L x W x H) Weight: 150 kg Rated temperature: 1000°C You are welcome to visit us for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. Iijdpfx Abezu Natjnef For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. Iisdpfx Ajzlf Dcebnjf This fully automatic and compact bandsaw machine is manufactured in Italy using European components. As the importer, we can arrange a demonstration of the machine at your location.

Condition: used, mileage: 292,000 km, power: 188 kW (255.61 HP), first registration: 02/1998, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, Equipment: all wheel drive, crane, - 1 owner!! - German vehicle - Very good condition!! Iodpfx Asy Hgftjbnjif

Condition: new, Heidenhain ROD 260 6000 01-03 angle measuring device, . 331 881-35, serial number: 10330464, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Isdpfx Absi Eavzsnoif

Condition: new, Brinkmann STC 260 / 460 MVX + 443 submersible pump, 250 L/min, No. 002, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Iodpfx Asi D Hkiebnjif

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Iijdpjy Nd S Ajfx Abnef Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW Iiedpfx Abeu Rt Hdensf weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting.

Condition: used, mileage: 616,000 km, power: 191 kW (259.69 HP), first registration: 11/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1997, Equipment: ABS, Manufacturer Scania Model P94/260 4x2 NZ SLS590 Kombi 8.400 l. Year 1997 Iodpfxewb Rbns Abneif Condition Good Serial Number XLEP4X20004373122 Ref. nr. 1327822 Reg. date: 26-11-1997 Hk: 260 Km: 616000 Gearbox: Manual GR900 Eurotype: 2 Diesel tank: 1 Tank liter: 400 l Cabin heater: ? Cabin type: CP19 Drum brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22.5 Cover% left 30 - 20% Front suspension: Springs Suspension rear: Springs Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 18000 kg. Net weight: 12900 kg. Load capacity 5100 kg. Manufacturer: Simon Moos SLS 590 Tank capacity: 8420 liters. High pressure pump: Prattisolli MS55 High pressure capacity: 318 l/min Vacuum pump: Samson V15 Vacuum capacity: 1000 m3/h.

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER Iiedpfxszutnnj Abnof . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Year of construction: 1995, condition: ready for operation (used), A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible. Iodpfx Aowtg Etsbnsif

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Iijdpsyk Hclsfx Abnsf