Used Hole drilling EDM machines for sale (23)

Year of construction: 1989, Condition: good (used), Sell 2 sinker EDM machines Complete with filter, divider, tools, smoke evacuation B02Appcmdg

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters Vc83Cvhtm EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: good (used), For sale is a good used Huber Ocean OCT3525ZA start hole EDM machine from 2003. Drill can be inspected at any time. Subject to prior sale and errors excepted. Dqqt2V

Condition: used, Year of construction: 1999, operating hours: 40,547 h, Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 700 x 400 x 400 mm - Dimensions (long x wide x high): 1.800 x 1.600 x 2.230 mm - Weight: 2.500 kg - Operating hours: 21.483 Dqqcpd - Max. workpiece weight: 1.000 kg - Control: CHARMILLES - Electrode diameter: 0,1- 0,3 mm - Working area (X x Y x Z): 1.200 x 700 x 400 mm

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, GF AgieCharmilles Drill 20 Year of construction 2016 Travel paths (X/Y/Z): 300 x 200 x 300 mm Support surface: 400 x 300 mm Maximum drilling depth: 200 mm Electrode diameter: 0.1 to 3 mm Maximum workpiece weight: 300 kg Generator output: 30 amps Cfwchr89Lg Dielectric volume: 16 liters Machine dimensions: 1340 x 910 x 1940 mm Total weight of the machine: 870 kg The start hole erosion machine is cleaned, serviced and tested by us before delivery. We are also happy to offer transportation, commissioning and training.

Condition: used, Year of construction: 1975, Technical details: table length: 430 mm table width: 270 mm x-axis: 300 mm y-axis: 240 mm z-axis: 250 mm total power requirement: 2 kVA weight of the machine ca.: 0,72 t Krjmfaj weight: Schaltschrank: ca. 200 kg space requirements of the machine approx.: L:0,9 x B:1,0 x H:2,1 m START HOLE EROSION MACHINE - size of cooling pond: 1000 x 510 x 900mm - incl. electric cabinet: 600 x 550 x 1400mm Machine is on sale as is, without been checked and will be sold as is! i.D. *

Condition: refurbished (used), Year of construction: 2011, Machine coming from the Swiss watch industry in excellent condition.   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Cz9Mblhhvc Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining Dqye07 -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: repair required (used), Year of construction: 2011, CNC start hole drilling machine Huber Ocean OCT 3525CA . Dqp2Ex Water bath machine with tool changer and separate filter unit. Start hole EDM machine is from year of construction 2011. Subject to prior sale and errors excepted.

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Bsegup3Wvbq

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 640 mm, total height: 2,600 mm, total length: 1,580 mm, total width: 1,580 mm, workpiece weight (max.): 300 kg, overall weight: 1,100 kg, Table size (X x Y) 940mm x 450mm (granite) Travel (X x Y x Z) 650 x 400 x 360mm (head 640mm) Working area (X x Y x Z) 600 x 400 x 360mm Maximum workpiece weight 300 kg Electrode diameter 0.3 ~ 3.0mm (0.1~ or ~6.0 as an option) Electrode length up to 700mm Weight of the machine 1,100 kg Dimensions (W x D x H) 1,780 x 1,580 x 2,200 (Max 2,600)mm Interior (W x D x H) 1,900 x 1,600 x 2,700mm Required power 5KVA Electrolyte water/oil (optional) Automatic electrode changer 18 electrodes Water tank 70 liters Options Bfrr0Qnl Electrode changer double 36-fold (28 AGC) Water tank 130 liters

Year of construction: 2020, Condition: as good as new (ex-display), electrode diameter 0,5 to 3mm Bnwgx9Zcdw travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: new, Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, Brand-new machine, still in packaging. Visible at our Semsales premises. Machine with manual movements. Visualization of movements and speeds on industrial tablet. Automatic chuck 0.3 - 3 mm. Filtration and deionization system included in machine block. Lksb2S0Da

Condition: good (used), Year of construction: 2019, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, Toolmaking dissolved through company takeover B9Gkorvucs

Condition: good (used), Year of construction: 2016, Huber Ocean River 35 start hole drilling machine built in 2016. Drilling devil with 64 amp generator up to 6mm electrodes possible. Including a separate filter system and documentation. Dqj8O7 Start hole EDM machine is immediately available. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 1997, Used machine in good condition. Available for immediate delivery. - Weight: 2.200 kg - Dimensions (long x wide x high): 1.800 x 1.600 x 2.130 mm - Travel (X x Y x Z): 400 x 250 x 200 mm - Type of EDM : WIRE - Max. workpiece weight: 500 kg Cyynabjxcu

Year of construction: 1990, Condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm Gkysl9Wtcr twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm quill stroke 80 mm speed range 120 - 2580 rpm Tool holder MK 2

Condition: good (used), Year of construction: 2007, Charmilles HD10 Star Hole EDM Machine Frlaz8Mah

Condition: used, Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 640 mm, total height: 2,200 mm, total length: 1,780 mm, total width: 1,580 mm, table width: 450 mm, table length: 940 mm, Clamping table with M8 clamping holes Monitor 19" Electrode changer 18-fold Guide changer 3-fold Plastic protection at the front of the table NSD PC control unit Z-axis programming with switch-off Automatic zeroing of the Z-axis during drilling Automatic approach cycles Crash monitoring during positioning Latest generator technology with multi-pulse function Filter with filter pump Automatic intermediate guide Z-axis for 700 mm electrodes W-axis force compensation Ionizing unit Filter & high pressure pump Work light Buolhvod Remote control unit Ionization control Various tools in toolbox

Condition: used, Year of construction: 2010, Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD Bth9Vobzji - Type of EDM : WIRE - Max. workpiece weight: 200 kg

Condition: as good as new (ex-display), Year of construction: 2022, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, For sale is a start hole eroding machine bes S 32-3 Properties Hpugnrbyg High drilling speed low electrode wear table size (width x depth) 450 x 210 mm travel X/Y/Z 290 x 190 x 350 mm Motorized coarse adjustment Z 150 mm Max. Workpiece height 245 mm Max. Workpiece weight 200 kg Electrode guide adjustment 150 mm Electrode diameter 0.3 - 10 mm External dimensions of the machine 1030 x 800 x 2100 mm Net weight of the machine 600 kg Filtration canister 20 l (standard), Programmable Z-axis standard Several machines available immediately.

Condition: used, Year of construction: 2019, EDAF-3 precise machining machine, ATC 32EA , XYZ Scale, Erowa chuck, micro machining circuit - Dimensions (long x wide x high): 2.314 x 3020 x 2660 mm - Working area (X x Y x Z): 850 x 650 x 400 mm - Max. electrode weight: 60 kg - Weight: 4.800 kg Bn03Ije9Abg - Max. workpiece weight: 800 kg - Work table size (width x length): 700 x 500 mm - Control: Control CNC

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, For sale is a start hole eroding machine bes S 32-3 Properties High drilling speed low electrode wear table size (width x depth) 450 x 210 mm travel X/Y/Z 290 x 190 x 350 mm Motorized coarse adjustment Z 150 mm Max. Workpiece height 245 mm Max. Workpiece weight 200 kg Electrode guide adjustment 150 mm Electrode diameter 0.3 - 10 mm External dimensions of the machine 1030 x 800 x 2100 mm Net weight of the machine 600 kg Dmnjr3D Filtration canister 20 l (standard), Programmable Z-axis standard Several machines available immediately.