Used Die Sinking for sale (4,600)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Control: Charmilles Weight: 3,500 kg Rbedpfxsya Efwo Ahzjt

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system Rbedpfx Ahox Dahaezet This machine is part of an online auction.

Condition: used, Year of construction: 1999, Serial number: M20 STAR-002157 Futura control type: AFV 1PM-004340 Workpiece dimensions (approx.): 630 x 400 x 165 mm Rjdpfoyfpbyox Ahzebt Support surface: 400 x 300 mm Table to quill distance min./max.: 188/438 mm Workpiece weight: 200 kg Electrode weight: 25 kg Drive: Resolution: 0.001 mm Feed rate: 720 mm/min Precision: VDI3441 Z-axis position deviation Pa: 0.01/250 X,Y position deviation Pa: 0.01/300 C-axis: Max. electrode weight: 25 kg Max. operating current: 60 A Speed: 0 – 55 rpm Drive: DC servomotor Resolution: 0.001° Position deviation: 0.01° Electrode magazine: Number of electrodes: 4 on the right side Max. electrode dimensions: 70/80/165 mm Max. total electrode weight in magazine: 9 kg Compressed air: 7 bar With technical documentation With accessories

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Rjdpfx Ahswnhfkszjbt Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Redpewtzdwsfx Ahzebt Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Rsdpfx Aswzifxehzobt

Condition: excellent (used), Year of construction: 2023, Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Redpfswnfcgox Ahzebt Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Rbodpoxyyrqsfx Ahzjt

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. It is in very good condition. Rodpfx Aswimu Hshzebt

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. Rjdpox Sv E Hefx Ahzsbt We are also happy to offer you additional services: - Transport - Commissioning - Training - Accessories such as clamping devices

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 1600 mm Measurements height 2858 mm Machine weight 4400 kg Rjdpfsx D D Dfox Ahzsbt Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Application Types EDM

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Table Table load 400 kg Additional Equipment Rsdpfex D Inbjx Ahzsbt Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2002, operating hours: 42,610 h, travel distance X-axis: 900 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 405 mm, table width: 850 mm, Table size X: 1200 mm Table size Y: 850 mm Max. workpiece weight: 3000 kg Electrode changer: 16-position Quill interface: EROWA Rodpfxjx Up Efj Ahzebt

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Rsdpfx Aex Avh Hshzsbt Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 3,973 h, functionality: fully functional, Worktable size: 700 x 500 mm Travel (X, Y, Z): 400 x 300 x 300 mm Maximum electrode weight: 50 kg Maximum workpiece size: 900 x 650 x 350 mm Machine dimensions (L x W x H): 2315 x 2200 x 2420 mm Machine weight: 3,500 kg Controller: MITSUBISHI M800 D-Cubes CNC Dimensional accuracy: X, Y, Z / C: 0.1 µm / 0.0001° Standard accessories: - MITSUBISHI M800 D-Cubes CNC controller with 19" color multi-touch screen - FUZZY LOGIC control design - GV80 high-performance pulse generator - IDPM3 generator (standard) for graphite electrode machining, controls processing, reduces machining time and electrode wear - ESPER D-Cubes integrated programming system - Linear scale on Z axis - Controlled "C" axis with EROWA quick-clamping for positioning - Dielectric cooling system - Automatic central lubrication - Fire extinguishing system - Wide linear guides (THK) - Large-diameter direct-drive ball screw Rbedpfxex Sd N Tj Ahzst - CE-compliant design The machine comes with 18 EROWA collet holders and 2 EROWA clamp bases for electrode manufacturing, as well as one electrode measurement device and one workpiece measurement device. The machine is equipped with a 20-position tool changer and linear scales on all axes. Approximately 300 liters of dielectric fluid are also included. All factory accessories, machine manual, add-ons, and tool set are included. The machine is almost like new.

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Rjdpfxsw Ad Ide Ahzsbt

Year of construction: 2017, operating hours: 6,417 h, condition: ready for operation (used), General Data Machine weight 4400 kg Movement X-Axis Movement 600 mm Z-Axis Movement 400 mm Y-Axis Movement 400 mm Main Drive Number of axis 4 Rodpfxsx Nr N Ne Ahzebt This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Year of construction: 2019, operating hours: 51,377 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 550 kg, total height: 2,350 mm, total width: 2,025 mm, total length: 2,040 mm, overall weight: 2,920 kg, table load: 550 kg, Equipment: documentation/manual, Sodick EDM die-sinking machine AD35L Rbodpfx Aox Rp Dtjhzjt Dielectric tank 400 l, max. electrode weight 50 kg, machine footprint 2800 mm x 3140 mm. Extraction system is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system are also for sale in the package Rbedpjtdkkuofx Ahzst Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Rbsdpfx Ahoq Su Hnjzjt Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), 2 KEER OP VOORRAAD Rodpfex Imk Ssx Ahzsbt Tabledimensions / T slots: 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg

Condition: good (used), Year of construction: 2000, Description table length 560 mm table width 400 mm amperage axis travel (X, Y, Z): 320, 220, 320 mm C axis 360° dielectric 290 l table load 300 kg Rsdpfx Ahexbm Uuszebt voltage 400 V machine weight approx. 1950 kg approx. machine dimensions 1.65 x 1.60 x 2.45 m Net prices open to reasonable negotiation Dwebiexbm Ubja A Hkmeb 1. Bench drill 2. Jungner grinder 3. SPC 20 grinder 4. Marking plate (table) 800x500 5. Maho 800 6. 2D dividing head Ø 300 7. 3D dividing head Ø 300 8. Tesa 700 height gauge 9. *Charmilles 200 sinker EDM 10. Charmilles Drill 11 sinker EDM 11. Metal band saw

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, year of last overhaul: 2025, GF FORM 30 Revised Die-Sinking EDM Machine Year of manufacture: 2015 AC FORM HMI control system Travel paths (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Integrated C-axis, rotation speed U = 0–100 rpm Manual tank level adjustment: 150–450 mm ISPG generator with 80 A Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" flat screen monitor with mouse Jogbox for manual operation Machine dimensions: 1600 x 2700 x 2858 mm Total weight: 4400 kg The machine will be cleaned, serviced, and tested in our facility after receipt of your order. Rbsdpfxsx Ifrhj Ahzst We are pleased to offer you the following optional services: - Transport - Commissioning and operator training - Clamping devices - Dielectric fluid

Condition: excellent (used), Year of construction: 2010, mitsubishi EA8 cnc zinc spark machine Redpfxswh T Nue Ahzobt year of construction 2010 c-axis 4-fold changer x,y,z 300 x 250 x 250 mm generator 60 A max. workpiece weight 550 kg max. electrode weight 25 kg chiller hirschmann mount fire extinguishing system magnet on the table documentation and diskettes machine is connected for inspection

Condition: excellent (used), Year of construction: 2011, Exeron S 310 MF Year of construction: 2011 Generator hours: 26882 Control: exowin 20 x,y,z 310 x 270 x 270 mm c-axis 3r mounting in the head erowa chuck on the bed with magnet plate Rbedpfxev Nkrdo Ahzst generator 64 A c-box for hard metal and pkd 20-fold changer fire extinguishing system chiller aluminium clamping plate erowa documentation machine is connected for inspection