Used wire EDMs with x-travel of 0-299mm for sale (11)

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering Kwedpfsx D Ryyex Ad Njt • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,600 h, total height: 2,070 mm, overall weight: 3,400 kg, number of axes: 3, This 3-axis SEIBU M50AG wire EDM machine was manufactured in 2015. It supports workpiece dimensions up to 800x650x300 mm and a maximum weight of 800 kg. Features include a rapid traversing speed of 1200 mm/min and a fine increment capability of 0.0001 mm for precise machining. If you are looking to get high-quality EDM capabilities, consider the SEIBU M50AG machine we have for sale. Contact us for more information about this machine. • Maximum workpiece dimensions (W × D × H): 800 × 650 × 300 mm • Note: only coaxial flushing available for heights ≥ 250 mm • Maximum workpiece weight: 800 kg • Drive system: AC servo drives • Linear axes (X/Y) • Travels: X 500 mm (right/left), Y 350 mm (forward/backward) • Traversing speeds: rapid 1,200 mm/min; medium 100 mm/min; slow 10 mm/min • Smallest increment (step): 0.0001 mm • Upper head (Z-axis) Kwsdpex D Enxjfx Ad Nst • Drive system: AC servo drive • Travel (up/down): 310 mm • Tapering device (U/V axes) • Drive system: AC servo drives • Travels (upper head): U 120 mm (right/left), V 120 mm (forward/backward) • Traversing speeds: rapid 1,200 mm/min; medium 100 mm/min; slow 10 mm/min • Smallest increment (step): 0.0001 mm • Taper angle: standard up to ±32°; at 120 mm cutting height: ±10°; optional (at 40 mm cutting height): ±45° Dimensions Machine Depth 1915 mm

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings Kwedpfx Adox Igc Ue Not - Documentation available: Yes - CE certificate present: No - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg Kwedpfx Aexq Akwed Net The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: used, Year of construction: 2018, Wire erosion / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Kedpfevtftkox Ad Nswt Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Ksdpfsxnpmgex Ad Njwt

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Kwodpfoxnpkxjx Ad Njt

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Kodpfx Aowtmg Djd Nswt Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm Kjdpfx Ajg Icdyed Nowt dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2001, Agiecut Challenge 3 Year 2001 XYZ - 500x350x256 UV axis - +-70mm Maximum coveted 30° at 100 mm height Maximum pieces 1050x650x250 Maximum weight 400/800 kg Machine dimensions 2800x2400x2220mm Kjdpfxsuanm Ij Ad Newt Machine weight 4t500kg

Year of construction: 1989, condition: good (used), Data; - Working table travel 160x200mm - cutting thickness - max. 80 mm Ksdpfxsgrnyts Ad Nowt - workpiece weight - max. 40 kg - wire diameter from 0,08 to 0,15 mm - power supply - three-phase 380/220 V - power consumption 0,6 kW - machine weight - 650 kg