Used eccentric presses single column 55-99t for sale (109)

Condition: excellent (used), machine/vehicle number: 4868, functionality: fully functional, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Redpfx Aew T S Tzeahjw Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23.05.5021, functionality: fully functional, pressing force: 61 t, stroke length: 100 mm, table width: 700 mm, table length: 500 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Rjdpfx Asx Hyq Ajahew Nominal force: 600 kN Single stroke: 32 strokes/min at 1,400 rpm Continuous stroke: 65 strokes/min at 1,400 rpm Distance ram–table: min. 265 mm / max. 365 mm Stroke: 0 – 100 mm Die depth: 250 mm Table dimensions: 500 x 700 mm Tool dimensions: max. 215 x 340 mm MACHINE DETAILS Air pressure: min. 4 bar / max. 6 bar Drive Motor power: 5 kW Motor speed: 1,400 rpm Flywheel speed: 1,400 rpm Electrical data Input voltage: 380 – 400 V, 50 – 60 Hz Total power: 5 kW at 380 V Machine weight: 3,500 kg

Year of construction: 1987, condition: used, pressure 40 t throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm Rsdpfx Ajp Syctjahjw tool hole in ram Ø 50 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t Redpfx Aajfn Aqnshjw dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles Rodsd Nl E Uopfx Aahjw - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm Redpfx Aaslp U Ddshsw no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t Rsdpfx Aelp U Emeahjw dimensions of the machine ca. 1200x1900x2800 mm

Year of construction: 1984, condition: used, pressure 63 t throat 320 mm stroke 8-100 mm no. of strokes 120 Hub/min ram - range of adjustment 63 mm table surface area 730x600 mm ram surface 540x360 mm table height 850 mm Rsdpfx Aaep Sycpohsw tool hole in ram Ø40 mm weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 2000x2000x3000 mm

Year of construction: 1987, condition: used, pressure 63 t Rodpep Sycwefx Aahew throat 300 mm stroke 8-140 mm no. of strokes 70 Hub/min ram - range of adjustment 100 mm table surface area 750x620 mm ram surface 500x340 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 2100x1500x3300 mm

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t Redslp U Daopfx Aahew dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm Rsdpolp U D Tsfx Aahsw table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Year of construction: 1959, condition: used, pressure 65 t throat 370 mm stroke 29-151 mm no. of strokes 50 Hub/min ram - range of adjustment 80 mm table surface area 1300x700 mm ram surface 1000x600 mm hole in the table ¦ 110 mm table height 800 mm Rodpfx Aaslp U E Hehew tool hole in ram Ø 40 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1700x2000x2800 mm

Condition: used, Year of construction: 1982, pressure 63 t throat 315 mm stroke 8 - 120 mm table surface area 630 x 800 mm dayligth 560 mm ram adjustment 70 mm no. of strokes 56/90 Hub/min ram surface 400 x 500 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: - Machine is completely disassembled, checked - Machine is repainted Redpfjt Ev Tnox Aahew - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm press is to be dismantled and partially overhauled: - dismantling and checking - new colors Rodjch Umcspfx Aahjw - new control cabinet with ABB safety control and touch screen - current UVV test with brake time measurement and press test book - COnversion to safe operation

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW Rsdpfxecp Apyj Aahew weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm no. of strokes 52/80 Hub/min ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm weight of the machine ca. 4,5 t Rsdswa Umlepfx Aahjw dimensions of the machine ca. 2000x2000x2700mm m

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm Rodpfx Aajx Ura Sohjw High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 60 t, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Rsdpextpltjfx Aahow Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Rsdpfsx D Tngjx Aahew Without the column stand mounted in the pictures.

Year of construction: 1979, condition: used, pressure 75 t throat 260 mm stroke 16-80 mm table surface area 800 x 520 mm distance table/ram 350 mm strokes - infinitely variable 50 - 250 Hub/min ram surface 400 x 300 mm ram adjustment 70 mm total power requirement 7,5 kW dimensions of the machine ca. 2,7 x 1,7 x 2,6 m weight of the machine ca. 4 t hole in the table 260 x 180 mm - pneumatic Ortlinghaus air clutch with additional brake Rjdofn Ap Djpfx Aahow - Infinitely variable speed control using a Stöhrer drive - break plate - 2 hand control - additional clamping plate - Air storage tank for clutch - Circulating oil lubrication

Year of construction: 1991, condition: used, pressure 63 t throat 275 mm stroke 8-120 mm no. of strokes 30-120 Hub/min ram - range of adjustment 85 mm hole in the table 220x100 mm table surface area 750x540 mm ram surface 400x260 mm table height 820 mm tool hole in ram Ø 50 mm total power requirement 7,7 kW weight of the machine ca. 5 t Rodpfx Aaolp U Dtohsw dimensions of the machine ca. BxTxH 1500x2000x2450 m

Year of construction: 1969, condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW Rsdpfoh Dfctox Aahjw weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 75 t, table width: 600 mm, table length: 800 mm, total length: 20,400 mm, total width: 18,300 mm, total height: 24,100 mm, overall weight: 4,650 kg, ram adjustment: 80 mm, To be viewed under power. Redperr Sybjfx Aahsw

Condition: used, Year of construction: 1990, pressure 75 t throat 290 mm stroke 12 - 100 mm ram adjustment 80 mm Redpot Ev T Ijfx Aahow no. of strokes 140 Hub/min table surface area 830 x 560 mm ram surface 630 x 300 mm total power requirement kW weight of the machine ca. 6,1 t dimensions of the machine ca. m

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the Rodpfoucgniox Aahew a single-column eccentric press, make Erfurt, type PEE III/160