Used eccentric presses single column 55-99t for sale (118)

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open Itedpfjdzqltox Ahvod - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Iedpfei A A Tbsx Ahvstd In very good, almost new condition

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Iodolb I Dzspfx Ahvstd Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW Itsdpfx Ahovuuc Roved weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm Itedpfsvuuavox Ahved no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm table height over floor 750 - 980 mm ram surface 600 x 240 mm ram adjustment 100 mm power capacity 4,5 / 6,9 kW Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Itjdjvut Hhepfx Ahvod Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation as is where is, WITHOUT any additional work, free loaded to truck

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Itsdpfxsvut Ews Ahvjd Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm Ijdpfx Ahjynztgovjtd with shield , . new UVV-tested .

Condition: used, Year of construction: 1979, Pressure 063 t throat 400 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm Itedpfx Ajylck Uehvsd table surface area 1000 x 750 mm hole in the table 260 x 140 mm table height over floor 710 mm ram surface 600 x 220 mm ram adjustment 50 mm weight 4,3 t dimensions (WxDxH) 1,1 x 2,6 x 2,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 Itodpfx Aoylb Edohvod - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the Iodpotqm Dmofx Ahvotd connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: v.c1854/GO/2009, Dimensions: W 1400 x D 1790 x H 2550 mm Weight: 5850 kg Compressed air: 5-6 bar Air connection: G 1/2" Air consumption: 0.009 m³/stroke Electric Motor Power: 3.5 / 7 kW Speeds: 725/1450 rpm Electrical Specifications Mains voltage: 380 V / 50 Hz Control voltage: 24 V / 50 Hz Lighting: 24 V / 50 Hz Working Area Rated press force: 63 tons Stroke rate – continuous operation L/S: 65/130 strokes/min Usable single stroke rate L/S: 32/- strokes/min Max. sheet thickness (continuous operation): 2.5 – 3.5 mm, single stroke: 7/- mm Clearance from ram center to machine frame: 315 mm Ram Adjustable stroke: 10–105 mm Ram adjustment: 70 mm Clamping area (W x D): 450 x 275 mm Clamping shank: hole Ø / depth: 45/100 mm Table Isdpfx Aeyml N Nohvotd Clamping area: W 800 x D 630 mm Through-hole Ø: 250 mm Distance between T-slots: 400 mm Intermediate Plates Clamping area: W 800 x D 610 mm Thickness: 85 mm Through-hole Ø: 110 mm 4 diagonal slots, X-configuration, 60° T-slots, slot width: 22 mm

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION Iedpeyk D Dtjfx Ahvjtd MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Itsdsh N S Sdspfx Ahvsd ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric Press SCHULER Model: PD 63 Pressing force: 63 t Press dimensions (L x W x H): 1800 x 1300 x 2500 mm Press weight: approx. 4,500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram (presser) size (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Maximum daylight (distance from ram to table): 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Control options: single stroke (foot pedal, two-hand lever), continuous operation (automatic mode with adjustable interval 1–99,999 s and repetitions 1–32,000) Special function: bottom dead center position setting Automatic central lubrication Pneumatic clutch and brake. Note: Two identical presses available (differing only in display size: 7” and 4.3”). Price for both presses: €10,500. No technical documentation available. PLC programming assistance via remote support by a programmer is possible. Shipping costs are extra. Urgent sale—need space for new equipment. Price is absolutely firm; after March 1st the presses will be disconnected from the power supply. Isdpow R Tl Tefx Ahvetd

Condition: ready for operation (used), Year of construction: 2000, Eccentric press Mios T40 Iedpfx Asyh Hzashvstd

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial Number: 54203/05G Year of Manufacture: 1999 Press Force: 1,000 kN Stroke Adjustment: 8 - 140 mm Ram Strokes: 50 - 180 strokes/minute Location: 41751 Viersen Condition: Used, functional Itedpfox Ea Shex Ahvsd Price: EUR 21,000 net / EUR 25,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. Please include your complete contact details with your inquiry! Additional photos are available upon request. You are also welcome to inspect the machine on site. Simply give us a call to arrange an appointment. This item comes from insolvency proceedings and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. The sale takes place without any warranty. Liability, reduction, or rescission are expressly excluded. An inspection prior to purchase is recommended, as the item is sold as seen. All information and content are provided without guarantee. Errors and changes excepted. The item is sold as inspected on site, in used condition, subject to reservation of title and to the exclusion of any warranty for visible and hidden defects, especially defects relating to technical condition, quality, performance, or usability. For capacity reasons, we will only respond to serious inquiries and price offers! This is for information purposes only. Viewings are possible by appointment only! Kind regards,

Condition: used, Year of construction: 2000, operating hours: 6,750 h, functionality: fully functional, machine/vehicle number: 309661, Offered for sale is an eccentric press Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – dismantling and transport by the buyer or by arrangement. Iedpfxexvqmko Ahvstd If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: used, Year of construction: 2000, operating hours: 5,840 h, functionality: fully functional, machine/vehicle number: 510565, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype Ijdpoxvqnbsfx Ahvjtd We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: good (used), DIGÉP SD63 Eccentric press, 63 ton eccentric press for sale manufacturer: DIGÉP type: SD63 year of manufacture: 1975 – pressing force: 63 t – slider stroke: 10-110 mm Iodpjiukrrofx Ahvstd – slider adjustment: 70 mm – stroke rate max: 60 1/min. - table size: 740x560 – main motor power: 5.5kw 400V 50Hz – total weight: approx. 4200 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, stroke length: 150 mm, power: 5.5 kW (7.48 HP), input voltage: 380 V, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Iedpfxeu Hav Ro Ahvotd Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, ram adjustment: 75 mm, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, stroke length: 150 mm, power: 5.5 kW (7.48 HP), input voltage: 380 V, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t Itjdpfx Aju Hautohvod two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation Itodpfx Ahewc U Inevjd

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Iedpfsvut Npex Ahvetd Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Ijdpfevvx Exex Ahvetd Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++