Eccentric press

MIOS T40

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Rodpsyubz Dofx Ahvsbw Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). Rbsdst Ucpbjpfx Ahvjw One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Rbodpew Rry Njfx Ahvew Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Redpfxsuv Hlks Ahvebw Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Rbsdpfx Ahoda Ha Njvjw Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 2013, 1 used 5-axis (3+2) universal machining center Make: DMG Mori Model: DMU 50 Year of manufacture: 2013 Technical specifications: Rsdpfx Ajywfc Sehvjbw X-travel: 500 mm y-travel: 450 mm z-travel: 400 mm C-axis: 360° B-axis (table -50 / +110° mm Spindle speed: 10,000 rpm Spindle mount: ISO 40 DIN 69871 Control: Heidenhain TNC 620 Total power requirement: 13 / 9 kW Machine weight: approx. 4.5 t Space requirement: approx. 6 x 3 x 3 m Additional information Options: - 30-slot magazine with double gripper - Production package with high-pressure coolant and scraper-belt conveyor - 360 L coolant tank - Air blast - Coolant pistol - Electronic handwheel - HEIDENHAIN TS 649 infrared touch probe - Direct measuring system New motor spindle in 2022 ATTENTION: The machine is sold without the clamping system shown in the photos!!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Standard for clean rooms - ISO 14644-1: Level 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: Rodpfxopd In Ds Ahvsbw CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Rsdpfowbginjx Ahvobw Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CMX 50 U Year of manufacture: 2019 Control unit: Slimline Siemens Operate Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110 ° C-axis: 360 ° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Working table: Table size: D 630 x 500 mm Tool changer: Number of tool pockets: 30 positions Rapid traverse rates: Rapid traverse (X/Y/Z): 30 m/min Operating hours: approx. 7,070 h Spindle hours: approx. 2,800 h Technical features & accessories: Rbjdpfx Ajywlkcohvew - Direct linear measuring system in x, y, and z axes, including air purge - Air blow switching via M function - Production package, consisting of: - Internal coolant supply 12 bar - Chip conveyor, 250 l tank - Bed flushing via M function - Coolant spray gun - Machine enclosure roof - 4-color signal lamp - Renishaw measuring kit, consisting of: - Touch probe PP40 - Tool measurement TS27R - Tool breakage monitoring - Calibration tool - Preparation for 3DquickSET Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t Rjdpfxjwc U Ins Ahvebw dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation