Used machining centers (vertical) X-axis travel 1700mm for sale (168)

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm Hfodpfjtuggcox Ag Der z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: good (used), Year of construction: 2015, 1 used portal machining center Manufacturer: Haas Model: Gr 510 Year of manufacture: 2015 Technical details X-axis: 3073 mm Y-axis: 1549 mm Z-axis: 279 mm Control: HAAS Table size: 3099 x 1346 mm Total power requirement: 11.2 kW Hodpfxoxzifve Ag Dofr Machine weight approx.: 9.2 t Shipping dimensions: 5.5 x 2.9 x 2.9 (3.2) m Space requirements approx.: 6 x 3 x 3 m Additional information 4th axis NC rotary table with tailstock and swiveling bridge

Condition: good (used), Year of construction: 2002, HERMLE C800 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC 530 CONTROL Hfjdpfox A Hf Aex Ag Dsr Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=800mm, 'Y'=600mm, 'Z'=500mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Spindle Taper ISO 40. Maximum Spindle Speed 12,000rpm. 87 Position ATC. S/No. 15650 (2002).

Condition: used, Year of construction: 2016, CNC MATRIX 2, table 3500 x 800 mm, travels 3000 x 800 x 720 mm, spindle speed 18,000 rpm, 48-tool magazine, through-spindle coolant, central divider for pendulum operation, SANKYO DS50C-R1-2 rotary table, 5 simultaneous axes, chip conveyor. Hedpfoxyzhasx Ag Dsfr

Year of construction: 2005, condition: good (used), CNC control Tekna SLW Hfodpoklzzljfx Ag Dor 8 tool places pneumatic clamping device Technische Daten / technical details: X-Weg / X-travel 4000 mm Y-Weg / Y-travel 270 mm Z-Weg / Z-travel 270 mm Spindelaufnahme / spindle taper SK30 Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm Antriebsleistung / drive capacity 7 kW Gewicht der Maschine ca. / weight 1100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, rotational speed (max.): 18,000 rpm, Emmegi Phantomatic T5 – CNC Profile Machining Centre (2007) For sale: a well-maintained and fully operational Emmegi Phantomatic T5 CNC profile machining centre. This machine is ideal for the efficient and precise processing of aluminium, PVC, and light-alloy profiles. The long X-axis travel allows machining of profiles up to 7 meters in a single setup, while the pendulum mode delivers outstanding productivity for series production. Technical Specifications Manufacturer: Emmegi Model: Phantomatic T5 Year of Manufacture: 2007 Control System: CNC – 3 axes (X/Y/Z) Axis Travels: X-axis: 7000 mm Y-axis: 300 mm Z-axis: 350 mm Spindle Power: 5.5 kW electrospindle Spindle Speed: up to 18,000 rpm Tool Holder: ISO 30 Tool Magazines: 2 × (5 + 1) tool positions Machining Capability: Five-sided machining with angle heads Clamps: 8 pcs, automatic positioning Operating Modes: Single-zone machining Double-zone / pendulum machining Maximum Profile Length: 7000 mm Machine Weight: approx. 3200 kg Air Pressure: 6–8 bar Equipment & Features - Automatic clamp positioning - Sawing, drilling, and milling in a single setup - Pendulum mode for continuous production - Dual tool magazines for both working zones - Suitable for long aluminium and PVC profiles - Optional Camplus software (depending on machine) Condition - Fully functional and ready for operation - All axes run smoothly - Tool magazines fully operational - Mainly used for aluminium profiles (light-duty work) - Machine is clean and in straight condition Ideal Applications - Aluminium window & door fabrication - Light-alloy profile machining - PVC profile processing Hjdpexz R H Usfx Ag Defr - Batch and serial production - Industrial manufacturing of long profiles Please verify the accuracy of the machine specifications with the seller.

Condition: used, Year of construction: 2012, Mazak VTC-800/30 SR, 4 Axis Vertical Machining Centre with Mazatrol Matrix 2 CNC Control, Table Size 3500mm x 820mm, Travels X Axis 3000mm, Y Axis 800mm, Z Axis 720mm, B Axis +1- 110 deg, Spindle Speed Max 18,000rpm, 48 Tool ATC, BT40 Spindle Taper, Includes 5th Axis (C Axis) Rotary Table (needs Attention), Filtermist FX7002 Oil Mist Filter, Machine Weight 16100kg. S/No. 233783 (2012) Includes Various BT40 Spindle Tool Holders in ATC and Boxes Hfedpfxjxzq A Nj Ag Dsr Please Note: This lot is Lot 1 of our online auction 3443 and please visit our website for more details. Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table width: 800 mm, table length: 2,240 mm, Technical Data: • Table size: 2,240 mm × 810 mm (≈ 88.19″ × 31.89″) • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm Hfjdpfx Asxw Uxasg Dsr • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. Y-axis (travel): 810 mm according to manufacturer's data. Maximum workpiece height: 870 mm according to catalogue specification. Travel paths (typical): One datasheet specifies: X-axis 2,032 mm, Y-axis 810 mm, Z-axis approx. 750 mm – depending on version. Machine dimensions / weight (including CNC): e.g. approx. 5,685 mm × 4,096 mm footprint (for certain version) Control unit: Equipped with MAZATROL CNC control (touchscreen, graphical user interface) – for intuitive operation Weight approx. 14,000 kg according to catalogue specification. All information provided without guarantee.

Condition: used, Year of construction: 2003, x-travel 3000 mm Hedpexzk Rajfx Ag Dsfr y-travel 800 mm z-travel 800 mm weight of the machine ca. 16000 kg

Condition: like new (used), Year of construction: 2024, CNC SMOOTH AI, Travel X axis 650 mm, Y axis 550 mm, Z axis 530 mm, B axis +120° to -30°, indexation 0.0001°, C axis 360° indexation 0.0001° and continuous, Max. part diameter 730 mm, Max. height 450 mm, Spindle 18,000 rpm BT 40, 90-tool magazine, RENISHAW RMP 600 probe, 70 bar through-spindle coolant, CROMAR chip conveyor. Options: electronic handwheel, robot interface preparation, and automatic side door, simultaneous 5-axis machining and engraving function. Hfjdpfxoxw S Rae Ag Djr

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Hjdpfx Aju Hf Ryjg Dofr Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours * Hodpfxoxvq Hqe Ag Dsfr

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, table width: 800 mm, table length: 2,100 mm, table load: 2,000 kg, rotational speed (max.): 10,000 rpm, overall weight: 21,000 kg, coolant supply: 20 bar, spindle motor power: 30 W, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 Basic HEIDENHAIN package: Motors, measuring systems, and handwheel Hfsdpjfdxi Usfx Ag Der IKZ: Internal coolant supply – 20 bar Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side-hinged viewing windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Optionally, the L2000 BAZ can be equipped with an SK-50 spindle interface Only inquiries from Germany will be answered

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Hsdpfx Agsxx Hwws Defr Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 4000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, Specification: Hfodpfjxxmrzex Ag Djr Travel Range: X Axis: 2134 mm Y Axis: 813 mm Z Axis: 762 mm Taper: 40 Spindle speed: 8100 rpm Tool capacity: 24+1 Ibsw N Hsxvr Ayjc Stod Max table load: 1814 kg Dimensions: 5105 x 2718 x 2972 mm Machine weight: 11,820 kg Accessories: Renishaw touch probe, holders

Condition: refurbished (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 1042, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 760 mm, rotational speed (max.): 300 rpm, overall weight: 26,000 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 150 mm, mount diameter: 50 mm, tool weight: 15,000 g, power: 30 kW (40.79 HP), I will sell a milling machine with a moving portal EDEL Koordimatic XL 4020 from 2003. • Working area: 4000 x 2000 Hedpfx Aorft Scsg Dsfr • Power of the electrospindle: 30 kW. (after full regeneration! - new bearings and clamping system) • Tool holder: SK 50 • Tool magazine: 36 pieces (damaged - no exchanger arm) • CNC control: FANUC 18 iM The machine takes up little space in relation to the working surface. I issue a VAT invoice. ATTENTION!!! - NEW PRICE!!!

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control SIN 840 D Siemens B - axis +/- 110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X/Y/Z 40,00 m/min spindle turning speed - stepless 20 - 8.000 U/min tool taper SK40 power capacity at 100 % load 13,50 kW power capacity at 25 % load 23,50 kW max. torque at 10% load 85,00 Nm max. torque at 25% load 150,00 Nm table surface area 2.920 x 740 mm number of T-slots 7 T-slot - distance 100 mm T-slots 1x 18H7 / 6x 18H12 integrated rotary-table 750 mm table load of rotary table max. 500 kg tool magazin: 60 tool diameter 80,00 mm wotkpiece diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg total power requirement 57 kW weight of the machine ca. 15,5 t dimensions of the machine ca. 10,50 x 6,60 x H2,70 m 5-axis simultaneous machining center with SIEMENS SINUMERIK 840D control, ShopMill user interface, chip conveyor, coolant system, exhauster, Hjdpow E Nnusfx Ag Defr coolant through the spindle, twin table machining possible – partition wall, electron. handwheel, TS649 measuring probe, Renishaw TRS2 tool breakage detection, swivel milling head B-axis, NC rotary table C-axis. Milling spindle new in 10/2019 Guides and ball screws new in 01/2023

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm Hfjdevptmwopfx Ag Der y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders *

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, table width: 650 mm, table length: 1,740 mm, rotational speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, number of slots in tool magazine: 60, Mazak MTV-655/60 Hedpfoxw Hztjx Ag Dofr

Condition: used, Year of construction: 2009, operating hours: 9,990 h, functionality: fully functional, Controller FANUC Series 0i Table size 2400 x 810 mm T slots in table 5/18/150 mm Max. table load 2500 kgs X travel 2000 mm Y travel 810 mm Z travel 810 mm Distance between table surface and spindle face 100 - 910 mm Spindle speed max. 8000 rpm Tool holder type BT40 ATC magazin 24-fold Spindle power 18,5/15 kW Power required 53 kVA Weight 17,3 tons Dimensions LxWxH = 5400 x 3450 x 4000 mm Accessories, features - Chip conveyor - Coolant tank Hfsdpfxoxtwwdo Ag Der - Handbücher The machine is ready for operation and to buy. Unter power in Hungary.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Hfedsxwwc Uepfx Ag Dsr Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,621 h, functionality: fully functional, machine/vehicle number: C124963, travel distance X-axis: 3,000 mm, travel distance Y-axis: 274 mm, travel distance Z-axis: 390 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 9, Machining center with only 1,621 spindle hours! TECHNICAL DETAILS Travel distances X-axis (longitudinal): 3,000 mm Y-axis (cross): 274 mm Z-axis (vertical): 390 mm Automatic positioning: -90° | 0 | +90° Positioning speeds X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min Spindle Maximum power in S1: 4 kW Maximum speed: 20,000 rpm Tool holder: HSK-50F Tool positions: 9 MACHINE DETAILS Weight: 1,700 kg Operating hours Spindle hours: 1,621 h Operating hours: 3,440 h EQUIPMENT - Milling cutter head 80 mm - Collets: 5 mm: 1 piece 9 mm: 1 piece Hfodpoxwnhzefx Ag Der 2.5 mm: 1 piece 8 mm: 3 pieces 16 mm: 1 piece 10 mm: 3 pieces 7 mm: 1 piece 12 mm: 1 piece 6-5 mm: 2 pieces 4 mm: 1 piece Note: The machine will be available from 01/12/2025.

Condition: used, Year of construction: 1995, x-travel 2000 mm y-travel 425 mm z-travel 425 mm Number of working hours lässt sich nicht auslesen h cooling Kühlung ja max. 10.500 ja control Simens Sinumerik 810 Hedpsr D Tu Iofx Ag Dofr weight 6700 kg

Condition: used, Year of construction: 2019, MAZAK VTC 800/30SR Table size (clamping surface): 3,500 x 820 mm X-axis travel: 3,000 mm Y-axis travel: 800 mm Z-axis travel: 720 mm Rapid traverse X/Y/Z: 50 m/min Max. spindle speed: 18,000 rpm Spindle taper: SK 40 The machine is equipped with: - Mazatrol SmoothX CNC control - Tool magazine with 48 tool positions Hjdpfx Agoxqhxms Dofr - Through-spindle coolant - Factory preparation for Monitoring B-System RMP60 - NC rotary table - Chip conveyor

Condition: used, Year of construction: 2008, x-travel 1800 mm y-travel 510 mm z-travel 480 mm weight of the machine ca. 5500 kg Hfsdpfoxuv Svox Ag Djr