Used Machining centers (vertical) X-axis travel 800-999mm for sale (158)

Condition: excellent (used), Year of construction: 2004, operating hours: 56,860 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: Siemens, controller model: 840 D, operating hours of spindle: 28,100 h, number of slots in tool magazine: 30, The machine can be inspected under power at any time. Lodpfx Afovncmks Eeru The spindle was replaced at approximately 5,500 hours. The control system was replaced, PCU50, in March 2024. Our Hedelius is in very good condition.

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Lredpfx Afov Hmdqs Eju Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97-X1286, travel distance X-axis: 850 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Control CNC system: FANUC 160M X-axis: 850 mm Y-axis: 650 mm Z-axis: 700 mm Spindle Spindle mount: BT50 Spindle speed: 10,000 rpm Spindle cooling: High pressure 30 bar (1/2 spindle cooling) Tool storage capacity: 80 places Table & pallets Table size (working arch diameter): 850 mm Pallet size: 600 x 600 mm Parting angle: Continuous B-axis Maximum load capacity: 1,200 kg Pallet changer: 6 stations Rapid traverses Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min MACHINE DETAILS Total weight: 19,000 kg Lrjdpfx Asv Dhq Tof Eju EQUIPMENT - Chip conveyor - Smoke extractor - CE marking

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12030326, travel distance X-axis: 810 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, table width: 900 mm, table length: 400 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! 2024 serviced TECHNICAL DETAILS X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Spindle tip to table: 115 mm Spindle center to column: 425 mm Table Table size: 900 x 400 mm T-slots: 14 x 3 x 125 mm Max. table load: 300 kg Ljdpfx Afsvupnbs Ejru Table height: 815 mm Feed rate X,Y axis: 36,000 mm/min Z axis: 30,000 mm/min Spindle Spindle taper: ISO SK40 Spindle speed: 10,000 rpm Motors Spindle motor power: 10 kW Servo motor power X,Y,Z: 2.3 / 2.3 / 3.3 kW Tool changer (ATC) Type: Arm Tool capacity: 24 tools Max. tool diameter: Ø 150 mm (with free adjacent positions) Max. tool weight: 7 kg Max. tool length: 300 mm Machine accuracy Positioning accuracy: ±0.005 / 1000 mm Repeatability: ±0.003 / 1000 mm MACHINE DETAILS Air pressure: 7 kg/cm² Energy requirement: 20 kW Machine dimensions (LxWxH): 3600 x 2000 x 2500 mm Machine weight: 3,500 kg Voltage and energy Voltage: 3-phase, 380-400 V AC Frequency: 50/60 Hz Total power: 20 kW Cable specifications: Main voltage and earth cable min. 8 mm² EQUIPMENT - Electronic handwheel - Fully enclosed splash guard - Powerful AC spindle motor - Steel telescopic covers for X, Y and Z axes - Halogen work lamp - Automatic central lubrication system - Control lamp - Spindle blow-out device - Screws and feet for leveling - Manual and parts list - Machine is sold without vice and tools

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Lrjdpfxsiva Dks Af Eou Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder - chip conveyor Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: TNC-620, total height: 2,560 mm, total length: 2,350 mm, total width: 2,160 mm, table width: 550 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,300 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 700 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Travel X/Y/Z: 850/550/550 mm Max. speed range: 10000 rpm Drive power AC (40 %): 14 kW Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment among others: Robust roller guides in all axes Lrjdpou T Irqofx Af Eju Spindle cooling system (oil cooling) Fast double-arm gripper with preselection and vertical magazine with 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 20 bar high-pressure pump Blast air through the spindle Coolant gun Movable electronic handwheel

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Ljdpfxjvw Sdqj Af Eeru Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: 828D + Shopmill, total height: 2,560 mm, total length: 2,350 mm, total width: 2,160 mm, table width: 550 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,300 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 700 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Travel X/Y/Z: 850/550/550 mm Max. speed range: 10000 rpm AC drive power (40 %): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment among others: Lrsdpjdkh Tiefx Af Eju Preparation for 4th & 5th axis Robust roller guides in all axes Spindle cooling system (oil cooling) Fast double-arm gripper with preselection and vertical magazine with 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 20 bar high-pressure pump Blast air through the spindle Coolant gun Movable electronic handwheel On request we can offer this machine including a suitable rotary table for 4th & 5th axis. Please indicate this in your inquiry!