Used Mikron for sale (188)

Condition: good (used), functionality: fully functional, Universal milling machine Mikron WF 2!!! Technical data: >> Fixed angular table >> Speed: 12 speeds from 50 - 2240 rpm >> Feed rate in 3 axes from 8 – 400 mm/min >> Rapid traverse in 3 axes 1400 mm/min >> Travels X/Y/Z: 420/250/345 mm >> Vertical and horizontal quill – SK40 >> Collet system S20x2 Bwjdpfxj Ahq Hze Aknsw >> Weight approx. 850 kg >> Central lubrication About the machine: A Mikron WF 2 universal milling machine in working condition is offered for sale. What makes this machine special are its travel distances, which are very large in relation to the machine's size: Z = 345 mm, X = 420 mm, and Y = 250 mm. Take advantage of the opportunity to inspect and test this machine on site while it is powered up.

Condition: like new (used), Year of construction: 2016, operating hours: 4,000 h, functionality: fully functional, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,000 h, number of slots in tool magazine: 38, Note the low operating hours. This machine is in very good condition and comes with many accessories. Bodpfx As Afzgwskneww

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Bjdpfx Ake Ah Ehvenjww Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231677,

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Mikron VCE1000 pro Machining Center Year of manufacture: 2016 Control system: Heidenhain TNC 620 X-axis travel: 1000 mm Bwsdj Afn Egspfx Aknjw Y-axis travel: 560 mm Z-axis travel: 600 mm Tool magazine: 40 positions Maximum spindle speed: 16,000 rpm Spindle taper: HSK63 Table dimensions (mm): 1000 x 560 Machine equipped with Heidenhain linear scales on the XYZ axes Tool probe: Renishaw OMP40-2 Through-spindle coolant (IKZ) High-pressure pump with paper filter Chip conveyor Spindle operating hours: 7254 hours

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Bwsdpfs Ahrm Dsx Aknjw Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Machining Center - Universal Manufacturer: MIKRON Type: UCP 600 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 400 mm Y-axis: 450 mm Z-axis: 450 mm C-axis: 360° C-axis rotational speed: 30 rpm A-axis: +107° / -10.5° Spindle speed: 20,000 rpm Number of tool stations: 30 Condition: Used Technical features & accessories: Bodpfx Ao Ahrm Sekneww - Oil/air lubrication system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and information; prior sale reserved!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Bwodpfoz Uxiiex Aknsw Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS Bjdpfx Akey Tv Nbonjww CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 DXF file import Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Chip conveyor Bwjdpfx Aez Sagloknjw Top condition / without the vises shown in the pictures.

Condition: used, Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 655 mm, controller manufacturer: Heidenhain, controller model: TNC 426, rotary table diameter: 800 mm, overall weight: 10,100 kg, spindle speed (max.): 15,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Machining Center - Universal Manufacturer: MIKRON Type: UCP 1000 Year of manufacture: 2000 Control system: HEIDENHAIN TNC 426 Technical specifications: X-axis: 800 mm Y-axis: 1,000 mm Z-axis: 655 mm C-axis: 360° A-axis: -25° / +45° Table diameter: 800 mm Spindle speed: 15,000 rpm Tool holder: SK 40 Bwjde Ahkhijpfx Aknsw Number of tool stations: 60 Machine weight: approx. 10,100 kg Condition: Used Technical features & accessories: - Chip conveyor - Compact filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Used, well-maintained CNC tool milling machine MIKRON, model: WF 7D, with HEIDENHAIN control. Table clamping surface: 600 x 1200 mm Travel distances: X-axis, Y-axis, Z-axis Bwjdpfo Ahz D Aex Aknsw 900 mm, 560 mm, 500 mm Spindle mount: SK 40 Spindle speed, continuously adjustable: 5 – 5000 rpm Feed rate, longitudinal and transverse: 0 – 8000 mm/min Rapid traverse, longitudinal and transverse: 8000 mm/min Feed rate, vertical: 0 – 6000 mm/min Rapid traverse, vertical: 6000 mm/min Drive power, main drive: 8.5 / 11.5 kW Dimensions W x D x H: 240 x 360 x 220 cm Weight approx. 4500 kg Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Bwsdpfxs Afy Ilo Aknjw Type: UCP 800 Duro Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 1991, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Bwodpo Ahxpfofx Aknow Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Bwsdpfezzknxox Aknow Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 05.14, travel distance X-axis: 410 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 50 rpm, total height: 1,560 mm, total width: 1,230 mm, total length: 1,330 mm, table length: 630 mm, rotational speed (max.): 2,240 rpm, rotational speed (min.): 50 rpm, overall weight: 1,000 kg, input voltage: 400 V, Equipment: documentation/manual, Mikron WF 2S – Year of manufacture 1985 Feature | Technical Data Manufacturer | Mikron, Switzerland Type | WF 2S Year of manufacture | 1985 Machine type | Universal tool milling machine X-axis | approx. 420 mm Y-axis | approx. 250 mm Z-axis | approx. 335–340 mm Table size | approx. 700 × 250 mm Spindle mount | ISO 40 Spindle speeds | 12 steps Speed range | 50–2,240 rpm Feeds | approx. 8–400 mm/min Rapid traverse | approx. 1,400 mm/min Main motor | 1.2 / 1.8 kW, two-stage Feed motor | approx. 0.55 kW Bwsdpsz Ix Drefx Aknjw Coolant pump | approx. 0.1 kW Weight | approx. 770 kg with vertical head/tilting table; depending on the configuration, up to approx. 1,000 kg Position indicator | often Heidenhain, depending on the configuration These values are also specified for a WF 2S currently offered from Switzerland, including a travel range of 420 × 250 × 335/340 mm, a speed range of 50–2,240 rpm, and a 1.2/1.8 kW spindle motor. Manuals, electrical diagrams, and programming instructions are available.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER Bsdpfxsy Twa Ue Akneww ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: used, Year of construction: 2013, Milling machines Bjdpfx Ao Adz Hhsknoww Travel distance X: 650 mm Travel distance Y :530 mm Travel distance Z: 600 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 620 spindle chuck: SK40 spindle revolutions: 9000 rpm Speed range to: 9000 U/min table size X: 850 mm table size Y: 560 mm tool changer: 30 - time Rapid traverse: 30 m/min chip conveyor control Heidenhain - Very good condition - Washdown gun - Electronic handwheel - Documentation / manual - Without clamping equipment - Inspection under power possible

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Travel distance Z: 540 mm Number of axis: 3 Bwjdpfx Aj Adz Hnsknjw milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time spindle cooling chip conveyor control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition - Without the vises shown in the pictures

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Bedpoz Dx Shjfx Aknsww Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Bodpfjzkbr Tjx Aknjww Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Bodpfx Akoz Ic Afonjww Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: used, Year of construction: 1988, operating hours: 66,120 h, functionality: fully functional, machine/vehicle number: 152.51.80.8xx, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, type of input current: three-phase, total height: 2,500 mm, total length: 2,100 mm, total width: 2,400 mm, overall weight: 3,100 kg, input voltage: 380 V, Equipment: documentation/manual, CNC milling machine Mikron WF 61 C – Heidenhain + accessories We are selling a Mikron WF 61 C with Heidenhain control from our machine inventory. The machine is offered including accessories, vices, and milling chucks. Machine and equipment: • Manufacturer: Mikron • Model: WF 61 C • Control: Heidenhain • Clamping table with T-slots • Separate control panel • Protective guard in the work area Included in the scope of delivery: • Mikron WF 61 C Bwodpfx Aj Aazphoknsw • Vices • Milling chucks The machine shows signs of wear and tear due to age and use, as well as paint chipping. The current original photos show the visual condition. An inspection is possible by appointment. The exact scope of accessories can be discussed and agreed upon. Terms of sale: Sale exclusively to entrepreneurs within the meaning of § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects in materials and workmanship. No guarantee regarding the condition is provided. The exclusion does not apply to the extent that a defect was fraudulently concealed or a guarantee regarding the condition was given. Commercial sale with invoice. Collection and transport by arrangement.

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm * Maximum table load: up to 3000 kg Bwedpfx Akoz Nh R Esnew The machine features the following technical equipment: Control system: Heidenhain TNC 620 Spindle speed: 10,000 rpm Tool holder: SK 40 High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW Bwjdpfxjy Tvw Ee Aknow DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)