Used Machining centers (vertical) X-axis travel 700-799mm for sale (217)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, High-stability machining center also suitable for rough milling. The control system offers both plain text and ISO programming. Technical specifications: Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm Drive power: 30 kW Speed: 15,000 rpm Spindle mount: SK 40 Type B Feed rate: up to 23 m/min Worktable: Dimensions 1,500 mm x 660 mm Max. workpiece weight 1,300 kg Control: Hurco Ultimax 4, including software for milling simulation Electronic handheld control panel RS 232C / V24 interfaces Two screens for text and graphics editing Two software units for plain text and ISO programming Machine design: High stability, also suitable for roughing Tool changer: Double-arm gripper with 24 stations Equipment: Cooling unit for milling spindle Internal coolant supply (IKZ) 20 bar Flushing system for chip removal Splash guard booth Coolant system with coolant filtration Chip conveyor Iijdsvrq Azjpfx Afieh Machine data: Space requirement (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm Weight approx. 9,000 kg Connected load: 50 kVA, 400 V, 50/60 Hz The machining center is fully functional. A live inspection is available by appointment. All tools and consumables shown in the photos are not included in the scope of delivery. Subject to technical changes and errors.

Condition: used, Radial drilling machine Isdpfx Aswwmk Djfieih Manufacturer: Kovosvit Holoubkov. Type: VOM 50.

Condition: like new (used), Year of construction: 2022, operating hours: 279 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MODEL B5 Plus, table width: 410 mm, table length: 850 mm, table load: 300 kg, rotational speed (max.): 24,000 rpm, coolant supply: 15 bar, spindle motor power: 26,000 W, spindle nose: BBT30, number of slots in tool magazine: 21, Machine preparation for through-spindle coolant from 15 to 70 bar Coolant tank without conveyor including: Isdpfx Afew U D Ugoioih - 300 L tank - 15 bar pump for through-spindle coolant - 25 micron cartridge filter with electrical clogging detection Soluble oil coolant system, including: - Sump wash pumps - Wash gun - M8 coolant pump (around the spindle) - RENISHAW probe for parts and tools

Condition: ready for operation (used), Year of construction: 1994, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, overall weight: 5,500 kg, Fanuc OM double Nikken divider Ijdpfev I U T Nox Afijih 40 spindle, 20-tool changer 2 tables chip evacuator

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 machine 2, Year of manufacture 2012, Heidenhain iTNC 530 control system, travel X/Y/Z 760/610/610 mm, tool changer 30 times, SK 40 holder, Spindle speed up to 12,000 rpm, Air blast through the spindle, IKZ 20 bar, Table clamping surface 1000 x 600 mm, max. table load 700 kg, Scraper belt chip conveyor, 3 D measuring probe, toolsetter, infrared receiver, cooler, thermal compensation, spindle replacement 07/2023 Iodpfew Uf Ibex Afieih

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO25 - Spindle speeds : 50-12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 740/185/220 [mm] A ROTARY AXIS - Travel : 110 [°] - Indexing precision : 0.001 [°] POWER SUPPLY - Supply voltage : 3x400 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2215 x 2500 [mm] Iijdouhb Aropfx Afijh - Machine height : 2650 [mm] - Machine weight : 3550 [kg] EQUIPMENT - CNC : Num 1060

Condition: used, Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Frame No. H-30688 Iodswgbfuspfx Afieih Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: excellent (used), Year of construction: 2018, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: P128YH003, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller model: Fanuc 31i-B5, rotational speed (max.): 10,000 rpm, overall weight: 2,100 kg, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 40 mm, input voltage: 250 V, type of input current: three-phase, Equipment: CE marking, USB port, documentation/manual, type plate available, 4-axis CNC milling machine, original DDR rotary table, 21 tools, reinforced spindle 10,000 rpm, Fanuc 31i-B5m controller, table travel 700 x 400 x 330 mm Isdpfx Afjw T S Nijisih

Condition: excellent (used), Year of construction: 2023, operating hours: 1,232 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 18 kVA, torque: 90 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 410 mm, table length: 900 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 32, tool length: 300 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Spinner VC 750 Iedevtnytepfx Afisih Control: Heidenhain iTNC 620 Travel path X: 760 mm Travel path Y: 460 mm Travel path Z: 460 mm Table size: 900 x 410 mm SK 40 tool holder Tool positions: 32 Max. spindle speed: 10,000 Rapid traverse: 36 m/min Weight 4.0 t Equipment: - Blum 3D infrared touch system - IKZ 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 620 The machine is in our production and is still in use. It can be handed over at short notice by arrangement. Instructions on how to use the machine can be provided for a separate charge. The machine has always been regularly serviced and is in very good, well-maintained condition. All repairs were always carried out using original parts from the manufacturer.

Condition: new, Year of construction: 2025, New protective cover for Haas machines, VF-3, Z-axis. Iodpfx Ajw Tkwrsfieih If necessary, we can check dimensions and produce other protective covers. I am ready to ship this and other protective covers to you globally. Also we have protective covers for DMG 635

Condition: used, Year of construction: 2018, operating hours: 8,300 h, Vertical machining center, Haas brand, model VF-2, year 2.018. Maximum spindle speed: 8,000 RPM, X axis travel: 762 mm, Y axis: 406 mm, Z axis: 508 mm, tool magazine for 20 units, worktable dimensions: 914 x 356 mm, maximum weight on worktable: 1,361 kg. Iiodpfxovkw I Io Afieh

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/600/500 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS Iisdpfsuhb Alsx Afioh - Travel : -120/+30 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 320 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650X2200 [mm] - Machine height : 2500 [mm] - Machine weight : 6500 [kg] EQUIPMENT - CNC : Heidenhain iTNC-620 - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw OMP 60

Condition: used, Year of construction: 2017, operating hours: 7,400 h, machine/vehicle number: XRAB7L0006, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 43 m/min, controller manufacturer: Heidenhain, controller model: TNC640, overall weight: 6,750 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 1,850 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, For sale is a 2017 Hardinge Bridgeport XR-760 (Installed in 2018)CNC Vertical Machining Centre fitted with the Heidenhain TNC 640 control. A high-performance, rigid, and versatile machine designed for precision milling applications across aerospace, automotive, energy, and general subcontracting industries. This XR-760 offers an excellent balance of large capacity, high spindle speeds, and fast rapids, making it ideal for demanding production environments while maintaining high accuracy and reliability. Machine Specifications: Travel (X / Y / Z): 760 × 610 × 610 mm Table Size: 900 × 600 mm Max Table Load: 700–900 kg Spindle: 12,000 rpm, BT-40 taper, 18.5 kW (25 hp) Tool Changer: 30-station (twin arm, fast tool-to-tool change) Max Tool Diameter: 85 mm (125 mm if adjacent pockets empty) Iedjw S Nhgepfx Afijih Max Tool Length: 300 mm Max Tool Weight: 7 kg Rapid Traverse: 43 m/min (X/Y), 36 m/min (Z) Cutting Feed Rate: Up to 20 m/min (20,000 mm/min) Accuracy (ISO 230-2): Positioning ±0.010 mm, Repeatability ±0.004 mm Coolant System: Through-spindle coolant (20 bar), washdown, air blast Chip Management: Swarf conveyor included Machine Weight: Approx. 6,750 kg Control: Heidenhain TNC 640 – powerful, intuitive, and highly reliable control system with advanced contouring capabilities. Condition: Year of Manufacture: 2017 Very good used condition, fully operational. Maintained to a high standard. Available for immediate inspection. Highlights: Modern Heidenhain TNC 640 control (rare upgrade vs iTNC 530 on older units) High-speed 12,000 rpm spindle Generous 760 × 610 × 610 mm travels Fast and accurate – perfect for high-precision work Complete with through-spindle coolant and chip conveyor

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 700 mm, travel distance Y-axis: 308 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 18 m/min, workpiece weight (max.): 350 kg, total height: 2,400 mm, total length: 1,850 mm, total width: 1,825 mm, table width: 610 mm, table length: 305 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of slots in tool magazine: 15, tool weight: 80 g, Equipment: documentation/manual, rotational speed infinitely variable, The machine was taken over in working condition from the customer and can also be inspected in operation at our premises if required. Iodpfx Aswwi Ewofijih Both the spindle and the axes run very smoothly. Additional information: Max. workpiece weight: 350 kg Max. tool weight: 8 kg Max. tool length: 300 mm Total weight: Machine dimensions: 1850 x 1825 x 2400 mm (LxWxH) Supplied with documentation and oil skimmer.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Brother, controller model: CNC-B00, table width: 400 mm, table length: 800 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 7,4 / 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 / 50 [m/min] - Cutting feed rates (X/Y/Z) : 10 / 10 / 20 [m/min] - Distance table / spindle nose (min./max.) : 180 - 480 [mm] TOOL CHANGER - Auto. Tool Changer type : Umbrella - Tool magazine capacity : 21 - Tool exchange time : 1,4 [sec] TABLE Iodpjulwztsfx Afioih - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.207 [mm] - Machine height : 2.592 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-B00 - Interface : Ethernet / USB - 3 colors status lamp - Prepared for robot loading : right handside - Type of divisor : full 4th axis * Manufacturer : LEHMANN EA-510 * Travel 4th axis : 360 [°] * Indexing precision 4th axis : 0,001 [°] * center height : 150 [mm] - COOLANT TANK - Coolant through spindle * with high-pressure pump : 15 [bars] - Chips conveyor : Rear HAKUSAN - Oil mist extractor : SARA UC1SD - Electric transformer : 400 / 220 [V]

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Ijdpfx Afewmxflsioih Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: good (used), Year of construction: 2002, Hurco VMX 30, year of construction 2002, Ultimax 4 control unit, Iiodpfx Afetud Ncoijh Travel X/Y/Z 760/510/610 mm, table size 1020 x 510 mm, 24-position tool changer, spindle speed up to 10,000 rpm, coolant system, electric handwheel, Pocket milling with islands, synchronous thread cutting, 3D contour software, DXF capable, chip conveyor,

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO30 - Spindle speeds : 18000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 705 / 425 / 610 [mm] A ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : +180/-5 [°] (+/-) - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 1260 x 490 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2300 [mm] - Machine height : 3000 [mm] - Machine weight : 5100 [kg] EQUIPMENT - CNC : iTNC 530 - Electronic handwheel - Type of divisor : 4e-5e axe intégré * manufacturer : Fehlmann * model : ATS 160 CNC * clamping diameter : 300 [mm] * center height : 160 [mm] * tightening type : Pneumatique - Coolant tank * with high-pressure pump - Oil mist extractor - Spindle cooling unit - Workpiece probe : Renishaw OMP 40-2 Iiodpfsuhb A Ejx Afijh - Electric transformer

Condition: used, Year of construction: 2005, operating hours: 13,300 h, functionality: fully functional, machine/vehicle number: 1062021, 40-position tool changer BT40, HAAS/FANUC control Iodjw Rbc Hjpfx Afioih

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 31i-B5 Speed : 24000 rpm Movement X/Y/Z : 700/400/400 mm Tool holder : BBT 30 Ijdpfx Afsw E Ux Eoisih Spindle: Technology:Directdrive Speed (max.):24.000 rpm Power (max.):26 kW Torque (max.):35 Nm Taper:BBT 30 Workingtable: Clampingsurface:850 x 410 mm Tableloading (max.):400 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:54 m/min Equipment/Accessory: Automationpreparation:Automated Sidedoor (pneumatic) Further Equipment:Trafo

Condition: good (used), Year of construction: 2004, Hurco VMX 42, year of manufacture 2004, Ultimax 4 control, travel X/Y/Z 760/510/510 mm, 24-station tool changer, SK 40 spindle taper, table size 1220 x 610 mm, max. table load up to 1100 kg, spindle speed up to 10,000 rpm, SK 40 spindle taper, coolant system, chip conveyor, new spindle in 2023 with current 480 hours. Iedpfxjw Nhcdo Afieih

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 BIG PLUS - Spindle power : 25 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 760/530/560 [mm] - Rapid traverses rates (X/Y/Z) : 6950/6950/11300 [Nm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 X 500 [mm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 8000 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 HCSI - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Rigid tapping - Coolant tank Iedpfx Asuhb Diofisih * with high-pressure pump : 20 [bars] * with paper filtering unit * with cooling unit for coolant * With washing gun - Coolant through spindle - Chips conveyor - Electric transformer

Condition: ready for operation (used), Year of construction: 2005, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1058083, 40-position tool changer BT40, HAAS/FANUC control Iiodpow Rbcmsfx Afijh

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/600/500 [mm] A ROTARY AXIS - Travel : -120/+30 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : 360 [°] (+/-) Iiodpfxjuhb Afs Afioh - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 320 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650X2220 [mm] - Machine height : 3000 [mm] - Machine weight : 6500 [kg] MACHINE HOURS - Number of hours under power : 11221 [h] - Number of working hours : 2191 [h] EQUIPMENT - CNC : Fanuc Oi-MD - Interactive programming : CAP - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP 60 - Tool breakage detection : Renishaw TRS - A traduire

Condition: excellent (used), Year of construction: 2005, operating hours: 20,003 h, functionality: fully functional, machine/vehicle number: 40164, 24-position tool changer BT40, HAAS/FANUC control, 1 belt filter system/high-pressure pump KNOLL KF 150, year of manufacture: 2005 Iiedpfxew Rbbpj Afioh