Used Mh 700 for sale (13,910)

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Gtodpfsx S Rcmsx Afkst

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg Godpfeu Idbysx Afkett spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, total height: 2,400 mm, total width: 1,850 mm, total length: 1,620 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 71235 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical Gtodpfx Asx Npm Esfkjt - Power [kW]: 8.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 900 - Table width [mm]: 500 - Tool holder: ISO40 - Main spindle power [kW]: 4 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1620mm x 1850mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gtsdpfjx Dw Iwjx Afkst

Year of construction: 1982, condition: good (used), machine/vehicle number: 75 810, table mounting size: 630 Ø mm movement x: 600 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand 80 mm spindle taper: ISO 40 spindle turning speed range: 20 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: 4 m/min Gjdpfx Aoby Hhtefkjtt electrical connection: 380 V kW space needed: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel Gjdewd Szbjpfx Afkett - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: good (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Manufacturer: CME Model: MH-700 Control: HeidenHain TNC430 Year of manufacture: 2004 Chip conveyor High pressure coolant 25 Bar ATC chain 60 positions Gtjdpfx Ajwpkq Eefket Optional magnetic table clamping system Auto index head 1 deg. Specifications Metric US Standard X-axis 7000 mm Y-axis 1200 mm Z-axis 1500 mm Table length 8200 mm Table width 1050 mm Table load 25000 Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk Milling head auto-index 1 x 1 ° Dimensions (Estimated) Length 12500 mm Width 5000 mm Height 4000 mm Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contract terms. We recommend verifying all important details.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 77533, feed length X-axis: 700 mm, feed length Y-axis: 500 mm, feed length Z-axis: 600 mm, spindle speed (max.): 6,300 rpm, spindle stroke: 80 mm, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 500 mm Gtsdpfxewtq T Uj Afkjt Z-axis travel: 600 mm Spindle stroke: 80 mm Spindle speed: 20 - 6300 rpm Feed rate: 1 - 4000 mm/min Rapid traverse X and Z: 12 m/min Rapid traverse Y: 10 m/min Accuracy: 0.001 mm

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Gsdowmqxkopfx Afkott

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Gtsdpfx Afox Dw Iqjkjt

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 450 mm z-travel 500 mm Gtodjx U A Sxspfx Afkjt Control Phillips 432 diameter Drehtisch 600 mm total power requirement 40 kW

Condition: ready for operation (used), Submersible pump Overall length: 1170 mm, immersion depth: 700 mm Manufacturer unknown, type plate is unfortunately not available, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for packing and shipping costs separately! Gjdpfx Ajx Dwgaefkett

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Gtedpfxewkihxs Afkst

Condition: good (used), Lifting capacity 24t Ø98 x 315mm Godevwb Sdjpfx Afkett Stroke 150mm Cylinder Ø 56mm Bore Ø 27mm 238kN Around 130x available Shipping from 10 pieces

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 220-036700, total height: 4,000 mm, load capacity: 1,000 kg, main lifting speed: 4,000 mm/min, throat depth: 7,000 mm, working height: 4,000 mm, ABUS trolley hoist GM 4 1000.4-2/HF 14 ABUS pillar jib crane VS 457 1000 kg x 7000 mm Gtodpfxjx T E Srs Afket Crane dismantled, but fully functional. Inspection possible by appointment.

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t Gtedoiqu S Ejpfx Afkst +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, mileage: 333,930 km, power: 294 kW (399.73 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 14 kg, maximum load weight: 11,550 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 05/2025, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking sensors, power assisted steering, soot filter, traction control, trailer coupling, * German vehicle Gtodsvw Ub Sopfx Afkjt * Condition, see photos * original ONLY 333,930 km * from 1st hand * Palfinger loading crane PK 27002 SH D + Jib PJ 060A * Complete documentation with test reports available * 5th & 6th control circuit * Radio remote control * 4 hydraulic supports * Hook height 25 m + 5 m possible with mechanical extensions * 5 hydraulic extensions + 2 for the jib * Lifts at 4.3m = 5,500kg - 6.2m = 3,600kg - 8.1m = 2,650kg - 10.2m = 2,000kg - 12.3m = 1,620kg -14.4m = 1,380kg - 17.3 = 930kg - 19.3m = 830kg - 21.3m = 720kg - 23m = 580kg * Foldable crane at the rear * Hook height 26.5m * Load hook * Trailer coupling * Trailer load 14,101kg * Total train weight 40,000kg * Flatbed with aluminum loading flaps * High front wall * Screen-printed floor * DIN lashing eyes * Flatbed dimensions: L=6,900 x W=2,480 x H=1,000 mm * Steerable trailing axle, raise + lower * Automatic transmission * Air conditioning * Cruise control * Blind spot assistant/camera * Engine brake * Differential lock * Telephone preparation * Comfortable driver's seat with air suspension * Electric windows * Electric mirrors, heated * Radio-CD * Central locking * Roof hatch * Rotating beacon * Leaf/air suspension * Work lights * ABS, ESP * Storage box * Wheelbase: 4.80m + 1.40m * GVW: 26000 kg * Payload: 9,550 kg * Empty weight 16,450kg * Various stone tongs available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, functionality: fully functional, machine/vehicle number: CT1453160, Year of construction: 2014, operating hours: 5,462 h, load capacity: 3,500 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, drive type: Diesel, Diesel forklift Gtsdpfx Afjwqh Uqoket Chassis number: CT1453160 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Description: Caterpillar DP 35 NT, No.: R0581, Year of manufacture: 2014, Operating hours: 5,462, Lift height: 7000 mm, Fork positioner, side shift and telescopic forks. The machine is in good optical and good technical condition. Fast and straightforward transport possible by arrangement! This listing is for identification of the equipment only! A detailed description of the condition and possible features will be provided individually upon request! Subject to errors and prior sale, sale to businesses only. All sales of used equipment are made without any warranty or guarantee. If you have not found your forklift, please contact us. We have a wide range of other equipment available on site. 3rd valve, 4th valve,

Condition: good (used), Year of construction: 1985, functionality: unexamined, total width: 2,100 mm, total length: 4,150 mm, total height: 1,100 mm, overall weight: 7,200 kg, type of input current: AC, 2 pieces electromagnetic overband magnetic separators. 1 piece is overhauled ! Manufacturer: SKET Magdeburg Type: EMHB 1200 / 1700-L Connection cable: 7,0 kW Weight: 7200 kg Dimensions Length: 4100 mm Width: 2100 mm Height: 1100 mm For conveyor belt systems with a belt width of up to 1200 mm. Belt speed up to a maximum of 2.09 m/s Automatic cleaning The electromagnetic overbelt magnet with automatic cleaning is installed above the conveyor belt and enables quick and easy separation of magnetic particles from the conveyed material. This separator is primarily used in applications with a high occurrence of ferromagnetic particles, where separation with manual cleaning would not be suitable due to the high level of contamination. Compared to permanent overband magnetic separators, the magnetic field of electromagnetic plates is much stronger and deeper. Electromagnetic magnetic separators are ideal for collecting parts with difficult shapes (such as screws, nuts, balls, etc.) and heavier iron parts. The extremely strong electromagnetic field also ensures the separation of ferromagnetic particles that are located under a higher layer of the flow. The electromagnet is also an exclusive solution for applications where it is necessary to deactivate the magnetic field for operational or maintenance reasons (which is not possible with the permanent magnet). Gjdsu Imz Nspfx Afkott Contributions of the separator application purified material (without ferromagnetic impurities) Permanent protection of technological systems continuous production operation automatic cleaning without interrupting the material flow minimization of operating effort and costs due to production downtime

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 x Gtedox U A Nqjpfx Afkst

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Manufacturer’s description: Gsdpfx Afex N I Smekstt Perforation machine with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: Gtodsdf S Eyepfx Afkjt 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: like new (used), Year of construction: 2004, operating hours: 68 h, functionality: fully functional, Adam Power Systems GmbH Thank you for your interest in our machines, please also have a look at our other offers. For sale we have a MTU emergency generator in a very good condition. Machine number: 2024-12 Gtjdpfx Afjtdr H Tskot Comprehensive maintenance and testing has been carried out and a video is available to document the process, showing how the genset was loaded on a load bank. Technical data: : Condition: Like new ! Manufacturer :SDMO Model : XS650K Power : KW520 /650KVA Engine : MTU 12cylinder Turbo Diesel Operating hours:68h RPM : 1500 rpm Frequency : 50 Hz Year of manufacture : 2004 Complete with control Incl. diesel tank in base frame L:6mW:240-6500 kg Ready for immediate use Delivery against 1500,-€ is possible. Adam Power Systems GmbH Werkstraße 16,24848 Kropp Generators of all kinds

Year of construction: 2010, condition: ready for operation (used), This MH 4ZHP was manufactured in 2010. It features a continuous furnace, cooling system, and a conveyor system with an accumulation section. Key specifications include a passage width of 650 mm, passage height of 1100 mm, and a total system length of 11.53 m. Ideal for operations requiring extensive heating and cooling processes. Contact us for more information about this machine. Application Types Godpfx Aox D H H Nsfkjtt Other Machine Tools

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Gjdpsx A Sd Dofx Afkott Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg