Vertical machining center

HAAS VF - 3 SS

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Year: 2017 Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Fpjdpfo Af Ncwsx Ah Eop Through spindle coolant Software options Under power ihnspection is available at anytime!

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Fjdpfx Aewv Hnmeh Eopp Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, total height: 2,692 mm, total width: 2,794 mm, overall weight: 5,670 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, number of slots in tool magazine: 24, tool weight: 5,400 g, product length (max.): 2,235 mm, number of axes: 3, This 4-axis HAAS VF-3SS was manufactured in 2017. It features an X-axis travel of 1016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a table size of 1219 x 457 mm and can support a maximum part weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details. Fsdpsz E Sy Uefx Ah Ejpp • Table size: 1219 x 457 mm • Max part weight on table: 794 kg • max torque 122 Nm • Tool capacity limits: max diameter (all tools) 76 mm; max diameter (adjacent position empty) 127 mm; max length 330 mm • Power supply: 3x400 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm Fpedjx D I Stjpfx Ah Ejp • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Fpedpfeyldxmox Ah Esp Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A Fedpfx Ahex D I Sme Eepp • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Fedeyalpcjpfx Ah Eopp Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Fpsdpfx Ajyu Nb Eeh Eop Weight: 240kg

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB Fodpfxoyuqacj Ah Ejpp IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] Fpsdpfx Ahoypxqre Eop - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder