Used machining centers (vertical) X-axis travel 700-799mm for sale (207)

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm Bwedpfxeu A Dnpo Aknsw T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Bedoydil Njpfx Aknjww Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 5,500 W, number of axes: 4, Vertical machining centre manufactured in 1997. This DONAU Danumeric 440 features a drilling capacity of 40 mm in solid steel and 50 mm in cast iron. It offers a spindle speed range of 15 – 2,800 rpm and a quill travel of 200 mm. The standard work table dimensions are 600 x 1,200 mm. If you are looking to get high-quality machining capabilities, consider the DONAU Danumeric 440 machine we have for sale. Contact us for further details. - Drilling Capacity in Solid Steel (St 60): 40 mm dia.- Drilling Capacity in Cast Iron (GG 22): 50 mm dia.- Tapping Capacity (Steel St 60): M 36- Tapping Capacity (Cast Iron GG 22): M 45- Tool Taper: SK 40 (DIN 69871, Form A)- Spindle Speed Range: 15 – 2,800 rpm (infinitely variable)- Spindle Motor (AC, frequency-controlled): 5.5 kW- Spindle Torque: max. 250 Nm (constant from 15 to 200 rpm)- Gearbox: 2-step automatically shifting (i_max 1:7)- Quill Feed (Z-Axis): 5 – 2,000 mm/min (infinitely variable)- Quill Travel / Stroke (Z-Axis): 200 mm- Quill Feed Force / Pressure: 12,000 N- Column Elevation / Hub (W-Axis): 410 mm- Column Diameter: 195 mm- Radial Arm Travel: 750 mm- Drilling Radius: min. 540 mm / max. 1,290 mm- Standard Work Table Dimensions: 600 x 1,200 mm (with 4 T-slots 18 mm, pitch 125 mm)- Table Height: 900 mm- Distance Spindle Nose to Table: 95 – 705 mm- Distance Spindle Nose to Floor: 995 – 1,605 mm- Maximum Workpiece Dimensions: L 2,950 mm x W 1,050 mm x H 1,350 mm- Rapid Traverse (X / Y Axis): 7.5 m/min- Rapid Traverse (Z-Axis): 5.0 m/min- Rapid Traverse (W-Axis): 3.0 m/min- Positioning Accuracy (X, Y): ± 0.075 mm- Repeatability (X, Y): ± 0.030 mm- Positioning Accuracy (Z, W): ± 0.05 mm- Repeatability (Z, W): ± 0.03 mm- Control System: 32-Bit CPU CNC Control (4 axes: X, Y, Z, W)- Screen: 9" Electroluminescent Display (EL, illuminated)- Program Memory: 2,000 NC blocks- Interfaces: V.24 / RS-232-C- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 13.0 kVA- Machine Weight: approx. 2,610 kg (with 600 x 1,200 mm table) Technical Specification Taper Size SK 40 Bwsdpfxj Agm Iao Aknsw

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A Bodpfx Akjz I T Rtjnsww table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: like new (used), Year of construction: 2008, operating hours: 1,780 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Bjdpfxez Ellde Akneww Accessories - Coolant unit - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Bjdpfszav H Ejx Aknsww

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, number of axes: 4, This 4-axis Hardinge Bridgeport GX 710 was manufactured in 2011. It features impressive travels of 710 mm in the X-axis, 400 mm in the Y-axis, and 430 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 20 tools. If you are looking to get high-quality machining capabilities, consider the Hardinge Bridgeport GX 710 vertical machining centre we have for sale. Contact us for further details. • Machine hours: approx. 16,000 • Accuracy: approx. 0.01 mm • Work history: mostly soft metals (~80%), plus plastics and a small amount of steel parts • Upgrades/retrofits: new X and Y-axis ball screws (~2021); spindle retrofit (~2020) • Status: under power Additional equipment • 4th axis: Hardinge HRP VC rotary table (160 mm center height) with tailstock • Tool probe Bedpfx Akj Agm Tqjnjww Technical Specification Taper Size ISO 40

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg Bwodey T Ekbopfx Aknjw

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 750 mm, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis CHIRON FZ 18 S LEAN was manufactured in 2003. It has a weight of 6000 kg and operates at a power rating of 29 kVA. The machine is designed for high-quality vertical machining capabilities. Consider the opportunity to buy this CHIRON FZ 18 S LEAN vertical machining centre. Contact us for further details. 40 units available (2003 & 2004)Manufactured in Germany Bjdpfxj Afppys Aknoww

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Bwedpfx Ao Ad Efnoknow Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Bodpoyftdfefx Aknsww Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 410 mm, table length: 850 mm, number of slots in tool magazine: 21, Equipment: documentation/manual, FANUC ROBODRILL ALPHA D21LiB5 MACHINING CENTER, YEAR OF MANUFACTURE 2016 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 700, Y 400, Z 330 MM TABLE SURFACE: 850 x 410 MM DIRECT DRIVE MOTORIZED SPINDLE, BBT 30, 10,000 RPM 21-TOOL AUTOMATIC TOOL CHANGER 4TH-AXIS DIVIDER WITH DIRECT DRIVE LASER PROBE FOR TOOL MEASUREMENT Bwjdpfxey Tvfce Aknjw INTERNAL COOLANT SYSTEM SPINDLE CHILLER

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm Bjdpsz Sy I Ijfx Akneww - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: good (used), functionality: fully functional, travel distance X-axis: 820 mm, travel distance Z-axis: 275 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller model: SIEMENS SINUMERIK, workpiece height (max.): 750 mm, workpiece diameter (max.): 680 mm, spindle speed (max.): 3,500 rpm, Equipment: chip conveyor, For sale: universal CNC turning center (lathe) from Czech manufacturer KOVOSVIT MAS PRIM S80i. This is a robust machine designed for precise turning, drilling, and threading in single-piece and small series production. The PRIM version is equipped with driven tools (live tooling) and a C-axis, enabling complex machining in a single setup. Bwodpsy E Iikefx Aknow Max spindle speed: up to 3500 rpm Turret: 12-station C-axis: Yes, allows turning and milling Control: Siemens Sinumerik 810D/840D Machine weight: approx. 6700 kg Key machine advantages: Versatility — Thanks to the C-axis and driven tools, it performs turning, milling, drilling, and threading in one setup. High repeatability — Suitable for precise parts made of steel, cast material, and stainless steels. Robustness — Heavy-duty construction and powerful spindle enable heavy milling and long-term operation. Usability — Ideal for workshops needing a single machine for a wide range of applications (from simple shafts to complex components with gears, holes, etc.).

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor Bwodpfxsy D Enhs Aknsw High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Suitable for pendulum machining (machining on one table, loading on the other).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Bwjdpfx Akjzr Nf Djnow Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, Bsdpfxsz Rz Nqe Akneww swarf conveyor, through spindle coolant,

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,661 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, Equipment: chip conveyor, rotational speed infinitely variable, Vertical CNC machining center Bwjdpfxozcpgwo Aknsw Control: FANUC F0MF+ Accessories: Chip conveyor, hinged belt type, manufactured by Cromar CNC AutoDoor

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Bwodpowvf Thofx Aknjw Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thread milling Bwodpoz Nn Azjfx Aknow

Condition: good (used), Year of construction: 2012, 3-axis machining center SPINNER VC 750, CNC Siemens 840D, year of manufacture 2012, serial number BV0446, chip conveyor. Bwjdsz R R Dxspfx Aknsw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 620, table width: 560 mm, table length: 910 mm, overall weight: 4,500 kg, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, Manufacturer: Wemas Model: VZ860Star Year of manufacture: 2009 Control system: Heidenhain 620 Travel distances XYZ: 860/600/650 Tool changer: 24 positions Spindle speed: 9,000 RPM Weight: approx. 4,500 kg Tool holder: SK40 Sale is only to commercial businesses, without warranty or guarantee. Free on board (FOB). Bedpfx Ajz R Amkskneww

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 Bwsdpfx Aozxz Hgsknew rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: excellent (used), Year of construction: 2011, Winmax control Bjdpfx Aks Adl Rdonjww Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, Bwodpfxoz Ha Ayo Aknow 30 ATC, Coolant, Low volt light, Swarf Conveyor