Used machining centers (vertical) X-axis travel 400-599mm for sale (246)

Condition: like new (used), Year of construction: 2006, machine/vehicle number: 184620, Control: Mazatrol 640 Nexus X-way: 560 mm Y-way: 410 mm Cdnxm9qiuu Z-way: 510 mm Table size: 900x410 mm Spindle cone: Sk40 Tool changer: 30 pl. Spindle speed: 12000 1/min Isdpfjkn Dxqox Abxetg IKZ: 15 bar Chip conveyour Machine weight: 5010 kg

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours Itodpsn D D Nhsfx Abxog total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm Ijdpex S Rxnjfx Abxjtg T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: excellent (used), Year of construction: 2010, operating hours: 1,350 h, Very little used machine, approx. 1,350 spindle hours! Itsdpfeyzaq Ssx Abxeg Control: Fanuc 31 i Travel X-axis: 300 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Number of tool stations: 12 positions Tool holder: HSK 32 Number of spindles: 1 Rapid traverse Z-axis: 60 m/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Max. speed: 15,000 rpm Chip conveyor

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Technical Data: Year of manufacture: 2017 Control ON: 15,247.30 hours (may vary) Program run: 5,059.39 hours (may vary) Table/Work area: > Travels X/Y/Z: 500/400/400 mm Itsdpfx Aoyfxdqebxeg > Distance table to spindle nose: 120-520 mm > Permissible table load: 250 kg > Clamping surface (L x W): 908 x 480 mm Spindle: > Speed range: 50-12,000 rpm > Tool holder: ISO/SK30 > Drive power: 9.7 kW Space requirements/ Weight: > Required space (W x D x H): 1,700 x 1,900 x 2,668 mm > Weight approx. 3,350 kg Equipment: > 3D probe with infrared transmission > Table probe for tool measurement > 30-position tool changer > Spray and compressed air pistol > USB keyboard > approx. 30 ISO/SK30 tool holders > complete documentation > all transport safety devices included > Lang system (picture 2) not included in the price

Condition: used, Year of construction: 2015, Technical details: Itjdpfsugpk Uex Abxeg x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" *

Condition: not inspected (used), Fanuc OM Control XYZ 600x400x460 Speed 45-6000 Taper ISO 40 Tool station 16 Itodpfx Absv Sunnexeg Table 920x320

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 Iodpjyxyz Sefx Abxjtg 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2, year 2022. Siemens SlimLine control. Travels: X-500 mm, Y-450 mm, Z-400 mm, B -5 / +110°, C 360°. Spindle max 15,000 rpm. Tool magazine for 60 tools, BBT40. Through-spindle cooling 70 bar. Chip conveyor. Filter paper. High-pressure coolant pumps. Workpiece probe, tool probe. Quickset (rotary axis calibration). Machine in very good condition, available at our warehouse in France, 01360 Loyettes. Full specification below in PDF. Itodpfx Abjxyi Hwoxog

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, A axis +120/-30 degrees, Ijdpfx Aoyt Hd Iebxstg C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Siemens 828 control, swarf conveyor

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 6000rpm, HAAS Control, 20 Station ATC, Coolant Itodeyt Hbgopfx Abxog

Condition: good (used), Year of construction: 2002, machine/vehicle number: AV4C0039, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of slots in tool magazine: 32, overall weight: 7,600 kg, coolant supply: 15 bar, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, number of spindles: 1, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rotary table diameter: 712 mm, spindle nose: DIN ISO40, spindle speed (max.): 8,000 rpm, table load: 300 kg, operating hours of spindle: 50,000 h, Equipment: documentation/manual, rotational speed infinitely variable, Machine is very well mantained and running in our production.Two pallets, DIN ISO40, Fanuc 18i-M Itodovt Sgqepfx Abxjg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Mitsubishi, controller model: M80B, table load: 255 kg, spindle speed (max.): 20,000 rpm, HAITIAN PRECISION TAPPING CENTER V-180 SHOWROOM MODEL, AS GOOD AS NEW V-180 specification: Controller:M80B Spindle air blow Spindle air seal Spindle oil chiller Pneumatic and lubrication system Coolant system Rigid tapping Direct drive spindle 20000rpm 16T disc type ATC Ijdpfjywvh Esx Abxstg 3-color signal lamp,working light X travel mm 500 Y travel mm 400 Z travel mm 330 Spindle nose to table surface mm 150-480 Table size mm 650×400 Table load kg 255 T slot mm 14×125×3 Drive type Direct drive Max.spindle speed rpm 20000 Spindle power (S1/S6) kW 3.7/5.5 Spindle torque (S1/S6) N.m 11.7/17.5 Spindle taper BT30 Pull stud MAS-P30T-1 Rapid traverse (X/Y/Z) m/min 48/48/48 Cutting feedrate (X/Y/Z) m/min 30/30/30 Max.tool dia. (Adjacent/Vacant) mm Φ60 / Φ80 Max.tool length mm 250 Max.tool weight kg 3 Tool change time s 1.6 Positioning accuracy X/Y/Z mm 0.010 Repeatable positioning accuracy X/Y/Z mm 0.006 Power capacity kVA 15 Machine weight t 2.5 Machine size(L×W×H) mm 1620×2080×2380

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Movement Itedpfxsx D Nq Re Abxog X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Itsdjycplmopfx Abxsg

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools Itsdpfx Ajx D N Ntjbxeg • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, controller manufacturer: BROTHER, total height: 2,360 mm, table load: 200 kg, overall weight: 4,600 kg, spindle speed (max.): 12,000 rpm, This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm. Additional equipment • chip conveyor • remote flyer • Kitagawa rotary plate Machine Benefits Technical Machine Benefits • 3 + 1 axis • Toolholders: random 26 positions • Fast forwards: 70-70-70 m/min • Pallets: 2 / 600 x 425 Iodpfjyi Ehksx Abxstg Dimensions Machine Depth 3700 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment Itjdpfxjypb Tpj Abxog • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Itodpfx Aboyi El Njxog Technical Machine Benefits • Rapid feed x-y-z 60 m/min • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,269 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640 HSCI, total height: 2,450 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional equipment • 4/5-axis Tilting Rotary Table prepared for Pallet System • B-axis Tilting Range: −120° to +60° • C-axis Rotation: 360° • B-axis Speed: 25 rpm • C-axis Speed: 20 rpm • Keller Dust Extraction System • EROWA UPC Production Chuck Clamping System • Tool Length and Diameter Laser Measurement, Broken Tool Detection • Touch Probe (Renishaw) • Precision Pack III – 5-axis Thermal Compensation Machine Benefits Technical Machine Benefits • Spindle-to-table distance (min/max): 50–450 mm • Table design: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (s1/s6 - 60%): 5. 9 nm / 6. 7 nm Ijdpfeyaqf Njx Abxjtg • Tool magazine capacity: 32 • Max. Workpiece size: Ø400 × 380 mm Extra Information ECOTEC Energy-saving Function Table Adapter for 4th and 5th Axes HR410 Wireless Remote Control EROWA UPC Basic Chuck with EROWA ITS100 Adapter Dimensions Machine Depth 2800 mm

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Itjdpjx Nr I Esfx Abxeg Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Once the machining processes are complete, they are removed again. The robots then transfer the components to a transfer system, which transports them to the downstream cleaning system. The integrated washing line ensures reliable cleaning of the components in accordance with the defined cleanliness specifications. After the washing process, two synchronously operating Fanuc robots take over the cleaned parts in the rear section of the system. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. Ijdpeydk Npofx Abxetg • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB • Tool system: Tool magazine with 16 tool positions Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Iodpfx Abjyhfltoxotg Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Machine Benefits Technical Machine Benefits • A-axis: -120° / +30° • C-axis: 360° Iedpfx Aeyalk Hsbxotg Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. • Table-to-spindle nose distance: 645 mm • Table size: 425 × 600 mm • Tool magazine capacity: 40 positions • Spindle override Additional equipment Isdpfex D Rdrsx Abxstg • 2 × Lehmann 4th-axis tables with tail support • Chip conveyor