Chiron FZ 15K S

Chiron FZ 15K S

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer Lrodpfxoxxi Rms Ab Aou - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: good (used), 3 machine vices Goody. Ljdorai Akspfx Ab Asru

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine Lrjdpjxxivcofx Ab Aou # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL Ljdpfx Aoxw Upljb Aeru # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 42, number of axes: 5, This 5-axis HERMLE C42 U universal machining centre was manufactured in 2011. It features a travel of 800 x 800 x 550 mm and a spindle speed of 18,000 rpm. The machine includes a NC swiveling rotary table and a tool magazine with 42 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C42 U machine we have for sale. Contact us for further details. Ljdpfx Asz Nf N Eob Aeru - Table / Rotary System: NC swiveling rotary table PW 800 with torque drive in C-axis and helical tandem drive in A-axis- Pallet Changing System: Included- Pallets Included: 3x Palette 630/STM320 Sternnut- Automatic Cabinet Doors: Included- Hydraulic & Pneumatic Expansion: Included- High Pressure Coolant (IKZ): Internal coolant supply 80 bar- Chip Conveyor: Scraper belt conveyor / Standard chip conveyor- Filtration: Paper band filter- Coolant System: Vario pressure limiting valve, standard coolant unit, sealing air for scales, bed flushing- Air Blow Devices: Air blow device, air blast through spindle center- Chip Flushing Gun: Included- Mist Extraction: Oil mist extraction- Enclosure Top: Automatic mechanical cabinet roof- Safety Glass: Laminated safety glass window- Compensation: Electrical thermal compensation iTNC- Handheld Control: Electrical hand control module iTNC- Measuring Probes: Heidenhain measuring probe incl. preparation, BLUM tool breakage/measurement A2- Tele-Service: Remote maintenance- Supply Voltage: 400 V / 3~- Mains Frequency: 50 Hz- Control Voltage: 24 V-- Nominal Current: 60 A- Power Consumption / Load: 37 kVA Technical Specification Taper Size HSK 63

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line Lrjdpfx Abjxwmvks Aou # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Year of construction: 1992, condition: used, machine/vehicle number: 0082-8100115, Technical description: Passively dampened CNC portal measuring machine with Renishaw pivoting head PH10M and switchable probe TP20. Measuring range: X-axis = 1500 mm; Y-axis = 660 mm; Z-axis = 660 mm Year of manufacture: 1992 Accuracy: Length measuring uncertainty according to VDI/VDE 2617: U3 = (3.5+4L/1000)µm Permissible temperature range for accuracy specification: 18..24°C Additional information: Plant number: 0082-8100115 Software: PC-DMIS Version 3.5 Accessories: various probe tips, as well as another probe head TP20 with medium probing force. Ljdobig N Dopfx Ab Asru

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Ledoz Ndxkepfx Ab Ajru Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Main spindle torque (Nm): 169.0 Travel ranges: X: 205 mm Z: 340 mm Linear guide Lodpjz Hxz Uefx Ab Asru -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total width: 2,100 mm, overall weight: 9,200 kg, product length (max.): 3,850 mm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details. Lrodpfxezwx Acs Ab Aou - Maximum Turning Diameter: 540-660 mm- Maximum Swing Diameter Over Bed: 660 mm- Maximum Turning Length: 1016-1045 mm- Main Spindle Speed: 35-5000 rpm- Milling Spindle Speed: up to 12000 rpm- Tool Holder: Capto C6- Machine Height: 2597 mm- Main Circuit Voltage: 3AC 400V 50/60Hz- Control Circuit Voltage: AC 100V / DC 24V- Main Motor Current: Max 84 A (400 V)- Rated Capacity: 50.0 kVA- Oil Cooling Unit Model: Daikin (Weight 190 kg)- Cooling Unit Capacity: Comp. 1.1 kW, Circulating Pump P1 0.4 kW, Circulating Pump P2 0.4 kW- Refrigerant: R407C (0.83 kg)