Used machining centers (vertical) X-axis travel 1200-1699mm for sale (208)

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm OSP200, Fusion360 IGF Coolant through spindle Bedpfezzbk Rex Aknsww 4th axis Kitagawa 250mm Available immediately In very good condition

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 3,100 mm, total width: 2,500 mm, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, product length (max.): 4,300 mm, number of axes: 3, This 3-axis SPINNER MVC-1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC-1600 vertical machining centre we have for sale. Contact us for further details. • Table size: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Electrical supply: 3/PE ~ 400 V, 50/60 Hz • Rated current: 50 A • Machine dimensions: approx. 4.3 × 2.5 × 3.1 m • Operational status: dismantled, not under power Additional equipment • E.A.-tronic Super 3 central lubrication unit • Habor heat pipe heat exchanger (Model HPM-35AR) • Coolant hoses/piping system installed Technical Specification Taper Size SK 40 Bsdpfx Aksz Rzqnonoww

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Bodezydarspfx Akneww Tool changer: 24-position SK50 Spindle speed: up to 8000 rpm Spindle torque: 406 Nm / 100% 623 Nm / 40% Chip conveyor Coolant pressure: 20 bar Weight: 11800 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 61,150 h, functionality: fully functional, machine/vehicle number: 114900009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D, table width: 800 mm, table length: 1,000 mm, operating hours of spindle: 61,150 h, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMG DMC 125U – 5-Axis Machining Centre with 2-Pallet System DMG DMC 125U CNC machining centre for sale, featuring: Bjdpfx Ajz Snvyjkneww 5-axis machining 2-pallet system SK50 tool taper 60-position tool magazine Through-tool coolant supply Oil mist separator Collection and Transport Conditions Delivery terms: EXW Veszkény, Hungary – Incoterms® 2020, at the seller’s premises, excluding loading onto the collecting vehicle. The purchase price does not include loading or transport. The buyer is responsible for arranging and paying for any dismantling required for transport, transport preparation, movement within the premises, lifting, cranage, loading, packaging, load securing, transport, insurance and unloading at the destination. All such operations shall be carried out at the buyer’s risk and responsibility, at a time and in a manner agreed with the seller in advance. The buyer shall provide a suitable transport vehicle, appropriate lifting and load-securing equipment, and qualified personnel. Any necessary transport permits, customs clearance and related administrative formalities shall also be arranged and paid for by the buyer.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Table: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Probing interface: Available (probe not specified) • Electrical: 3/PE ~ 400 V, 50/60 Hz; rated current 50 A • Electrical cabinet: Habor Precise Industries heat pipe heat exchanger (Model 7A2) Bjdpfx Asz Rzxrsknsww • Drive system: Siemens SIMODRIVE 611 modular drive system • Logistics: Crane loading on truck available (~800 EUR) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,267 mm, travel distance Y-axis: 632 mm, travel distance Z-axis: 498 mm, controller manufacturer: FANUC, controller model: 18i-MB, table load: 850 kg, overall weight: 6,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Leadwell MV-50i was manufactured in 2003. It features an X-axis travel of 1,267 mm, Y-axis travel of 632 mm, and Z-axis travel of 498 mm. The machine includes a table size of 1,417 × 607 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the Leadwell MV-50i vertical machining centre we have for sale. Contact us for further details. • Table size: 1,417 × 607 mm Bwjde Aa A Daopfx Aknow • Spindle taper: CAT 40 • Coolant through spindle: Depending on configuration Additional equipment • Chip conveyor: Depending on configuration

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Awea BM1200 Machining Centre Year 2006 Travels: 1200x600x600 mm Heidenhain TNC530 CNC Bwjdpfxjwvi Nmo Aknow SK40 Spindle 8000 rpm with gearbox Integrated 4th axis divider Spirsin Through spindle coolant

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 1270 x 600 x 610mm, 24 station tool changer, table 1420 x 580mm, 18.5kW motor power, spindle taper BT40, spindle speed 40 – 10,000rpm, Bsdpfx Aezu Nx Asknsww FANUC Control, low volt light, coolant,

Condition: used, Year of construction: 2009, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Fanuc Travel: 1200 x 600 x 600 mm Bedpfo Aa N Tnox Aknsww Table: 1300 x 600 mm BT 40, 8000 rpm 24-tool changer Weight: 7500 kg

Condition: used, Year of construction: 1995, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: Acramatic, controller model: 850SX, table width: 660 mm, table length: 1,370 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 8,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel 1.270 mm Y-axis travel 660 mm Z-axis travel 660 mm CNC Control Acramatic 850SX Table size 1.370 x 660 mm Table load 910 kg Rapid traverse X/Y/Z-axis 15.000 mm/min Spindle speeds 60 - 8.000 Rpm Spindle nose ISO 40 Distance Spindle - Table min/max 150/880 mm Toolchanger 21 positions Featured with: - Coolunit - Handwheel control - Full documentation Country of origin UK Bjdpfx Akeyg Et Ujnjww Spindle motor 9 kW Machine weight 8.000 kg Machine WxDxH 3.600 x 2.900 x 3.000 mm

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,300 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, table load: 1,000 kg, spindle speed (max.): 9,000 rpm, number of axes: 3, This 3-axis Cincinnati MAG CFV1300i was manufactured in 2010. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 540 mm, and Z-axis travel of 720 mm. The machine includes a maximum table load of 1000 kg and a maximum spindle speed of 9000 rpm. If you are looking to get high-quality machining capabilities, consider the Cincinnati MAG CFV1300i vertical machining centre we have for sale. Contact us for further details. • Internal cooling: yes • Number of places in the magazine: 24 • Accessories sold with the machine: 4 pcs of hydraulic vices • Accessories sold with the machine: tool holders approx. 24 pcs SK 40, both used • Latest replacements/investments/repairs: new spindle in 2022 + replacement of backup battery in 02/2026 Bsdpfozkriijx Aknsww

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Brand: BRETON Italia Model: XCeeder 1200 RT Type of machine: Vertical CNC machining center, 3 axes Year of construction: 2002 CNC control: SELCA S4045PD Working Capacity X-axis travel: 1,200 mm Y-axis travel: 1,000 mm Z-axis travel: 600 mm Table dimensions: 1,500 × 1,000 mm Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 60,000 mm/min Z-axis: 40,000 mm/min Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle line cooler Tool Magazine Automatic tool changer (ATC) Capacity: 30 tools Set of HSK-A63 tapers Assorted tooling Measuring Systems Measuring scales on the axes: X Y Z Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps Bwodjz Iakmopfx Aknew CTS pump for coolant through the spindle High-pressure CTS system External unit for CTS system Accessories: Coolant collection tank Chip conveyor Washing pumps High-pressure CTS pump through the spindle CTS external unit Scales on the X / Y / Z axes Spindle line cooler Fume extractor No. 2 magnetic tables Set of HSK-A63 tapers Assorted tooling Documentation: Machine manuals Electrical diagrams CE Declaration of Conformity Key Features: Vertical CNC machining center, 3 axes Large working travels: 1,200 × 1,000 × 600 mm High rapid traverse rates up to 60,000 mm/min High-speed spindle up to 18,000 rpm HSK-A63 spindle taper Automatic tool changer with 30 tools Measuring scales on the X, Y, and Z axes High-pressure CTS system Spindle line conditioning Chip conveyor and washing system Fume extractor No. 2 magnetic tables Complete with a set of HSK-A63 tapers and assorted tooling Complete with manuals, electrical diagrams, and CE Declaration

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in June 2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. Furthermore, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Manufacturing date: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color screen Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Form A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and shims CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connection power: 25 kVA Frequency: 50/60 Hz 3 phases Condition: Bjdpfx Akezp Iz Ejnjww The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel paths: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle cooling 30 bar - Extraction system - Tool measurement Renishaw prepared - Magazine with 50 positions Purchase price in 2004: EUR 230,000.00 Bodpfsxlg Ucsx Aknoww Defects: - Main spindle motor failure (electrical – likely winding burnt out) - Power supply unit for control system UV 101B defective - LT module 2x50A defective Net price without dismantling and unloaded, ex works Luckenwalde (Germany), without transport

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Bodpfx Akez Dttgjnjww Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant. Bodpfszzzwqsx Aknjww

Condition: like new (used), Year of construction: 2008, EUMACH SPINNER MCV 1600 MACHINING CENTER SELCA S 4045 D CNC YEAR: 2008 WORK TABLE: 1,800 mm x 810 mm TRAVELS: X: 1,600 mm Y: 800 mm Z: 700 mm Bodpfx Asz Td Uneknoww SPINDLE TAPER: ISO 40 / DIN 69871 SPINDLE SPEED: 10,000 RPM RANDOM TOOL CHANGER: 30 POSITIONS EQUIPPED WITH CHIP CONVEYOR FLYING TOOL CHANGER POWER: 18.5 KW WEIGHT: 15,000 KG

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V Bwodpfsz Dar Nex Aknsw • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG Bodpeu A U Nkefx Aknoww

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min Bjdpfsz Ah S Djx Aknjww • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL Bwsdpfx Akey Tvw Eenjw TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Probe Marposs T36. X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Bsdpoyk D R Tofx Aknoww Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Bwedozh Hbnepfx Aknew Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Bwedpfx Ake Agn Dvsnsw Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min Bwodpfxez Erwto Aknjw • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Technical Specification Taper Size BT 40