Used machining centers (vertical) X-axis travel 1200-1699mm for sale (208)

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Bsdpfe Agfr Esx Aknelp Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Bljdo Aggibjpfx Aknop Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Bodpfx Ae Ahpqmoknelp - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Blsdpfe Afpq Rex Aknjp

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation. Bedpfx Akoz Nfirsnjlp

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: FANUC 0i-MF Plus, total height: 3,030 mm, total length: 3,240 mm, total width: 2,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, overall weight: 6,990 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15 W, spindle nose: DIN 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 3-axis vertical machining center with FANUC CNC Bjdsz Smdwspfx Aknelp

Condition: used, Year of construction: 2014, Technical specifications • Control system: Fanuc 0i-MD • Travel distances (axes): • X-axis: 1,400 mm • Y-axis: 800 mm (4 guide rails) • Z-axis: 700 mm Bljde Af Ndfopfx Aknsp • Spindle: • Power: 22 kW • Speed: 10,000 rpm • Tool taper: BT40 • Table size: 1,650 x 800 mm • Tool changer: 24 tools • Prepared for 4th axis • Chip conveyor • Handwheel Guides: Hardened, precision-ground, and Turcite-B coated four-surface rectangular guides (boxways) for heavy-duty machining.

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Bsdpfxoz Ia U Ee Aknslp Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Wele Awea Machining Center Bedpfoz N Tf Isx Aknolp Type AA1165 Fanuc Series 18i-MB CNC Year 2008 Chip Conveyor ✅ Documentation ✅ Video Available ✅ Inspection Possible ✅

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Year of manufacture: 2008, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, SK 40, Air blow-through spindle, Bedpfj Aawnyex Aknjlp Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Bljdpfxs Ahrm De Aknjp Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 8,896 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, workpiece weight (max.): 1,000 kg, total height: 3,050 mm, total length: 4,000 mm, total width: 2,850 mm, table width: 800 mm, table length: 800 mm, table load: 1,000 kg, rotary table diameter: 800 mm, overall weight: 14,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,896 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine comes from a die-making company and has therefore not been used for many hours and has undergone relatively light machining in recent years. Due to an upgrade of the machine park, the machine is no longer needed but is still in full working order and can be inspected in our workshop while it is running. Additional options & accessories: - Chip conveyor - IKZ (internal cooling through the spindle) - 15,000 rpm HSK-A63 spindle - Heidenhain 3D probe - Electronic handwheel - Rotoclear Blodj Af Ndxjpfx Aknop - Electrical compensation for thermal expansion - BLUM laser measuring system - Coolant nozzle in the cabinet Weight & dimensions: approx. 14,000 kg 4.0 x 2.85 x 3.05 m (L x W x H)

Condition: good (used), Year of construction: 2007, X 1,200 Y 800 Z 510mm, table 500mm diam. HSK 63, 20.000Rpm, cooling through spindle 20 bar, ATC 40 pos, Heidenhain TNC 530, weight 16.100kg Bljdpj Abw Snjfx Aknop

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg Bljdpezmfn Rjfx Aknep * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2000, functionality: limited functionality, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 450 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,200 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, distance table to spindle center: 600 mm, input voltage: 380 V, type of input current: three-phase, distance stand to spindle center: 450 mm, distance table to quill: 450 mm, grinding spindle motor power: 20 W, grinding spindle speed: 3,000 rpm, LGB brand surface grinder, machine with few hours of use, price plus VAT. I have other machines for the metalworking industry; please contact me. Bedpfxjz Eac Re Aknelp

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 1250 was manufactured in 2019. It features a robust tool changer with approximately 24–30 stations and comes fully functional and freshly serviced. The machine includes vises, an external tool cabinet with an extensive set of tool holders, collets, and milling/drilling tooling. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 vertical machining centre we have for sale. Contact us for further details. - Power: 35 kVA - Voltage: 400 V - Phases: 3 + PE - Weight: 7900 kg - Tool Changer: Disc/drum type tool magazine (approx. 24–30 stations) - Included Equipment / Accessories: Machine vises (including HOLEX vise mounted on table), external tool cabinet with extensive set of tool holders, collets, and milling/drilling tooling Bledpfx As Agvhajknsp

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 12.5 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1600 / 1200 / 700 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 30 [m/min] - Cutting feed rates (X/Y/Z) : 20 / 20 / 20 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1800 x 1300 [mm] - Maximum weight upon table : 4000 [kg] - Distance table / spindle nose (min./max.) : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] Bjdpfx Ao Ahkz Rsknelp WEIGHT & DIMENSIONS - Machine floor space : 5.340 x 3.710 [mm] - Machine height : 4.060 [mm] - Machine weight : 18870 [kg] EQUIPMENT - CNC : Heidenhain TNC 640 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - Rigid tapping - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe : Heidenhain TT160 - Workpiece probe : Heidenhain TS460 - Electric transformer

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. Bjdpez R Rf Aofx Aknslp The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Bodpsylpf Sjfx Aknslp rapid traverse 42 m/min spindle speed range 20 to 14,000 rpm inline spindle with a power of 20.3 kW / 14.5 kW (40/100% load) tool clamping SK40 DIN69871 tool shank according to DIN69872 tool change with a 60-position SK40 magazine (turret with housing and dual gripper) table clamping area 1,760 x 750 mm direct measurement in the X, Y, Z axes Machine is connected and ready for testing.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,625 mm, travel distance Y-axis: 864 mm, travel distance Z-axis: 762 mm, table width: 1,676 mm, table length: 889 mm, table load: 2,500 kg, spindle speed (max.): 12,444 rpm, number of axes: 3, This 3-axis HURCO VMX64 was manufactured in 2000. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details. Bsdpfs Ahkauex Aknjlp - Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled) - Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel - Tool taper: SK 40 - Tool changer: 40 stations - Power connection: 3 x 400 V EQUIPMENT - Chip conveyor - Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion) - Spindle cooler (HABOR) - Oil mist extractor SARA (Type UC350/03) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, Dahlih MCV1250B Fanuc series 0i-MC Travel range: X1250mm, Y650mm, Z700mm Table dimensions: 1400x820mm Max. table load: 1500kg Spindle taper: BT40 Bsdpfxoztkaxo Aknelp Tool changer: 24 positions Max. spindle speed: 8000rpm Rapid traverse: X,Y 20000mm/min, Z12000mm/min Weight: 10500kg Includes Dahlih 4th axis (A-axis) Includes accessories, documentation, and parameter lists/backups.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Bljdpfezwhtkox Aknep Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) Bledpfxszt Nlmj Aknjp 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: like new (used), Year of construction: 2020, operating hours: 900 h, functionality: fully functional, NCT304 control (Windows-based, touch screen, USB, 19-inch LCD monitor) Table size: 1750 x 700 mm Max. table load: 1200 kg "T" slots in the table: 18 x 5 x 125 mm Distance between the spindle nose and table surface 135 - 835 mm X travel: 1600 mm Y travel: 700 mm Z travel: 700 mm Taper: SK40 Tool magazine: 16-station, arm type Max. spindle speed: 10000 rpm Drive power: 20 kW Power supply: 22 kVA Dimensions (L x W x H): 4370 x 2915 x 3027 mm Weight: 10000 kgs Accessories, equipment: - Coolant system Bjdoz I Sdxjpfx Aknjlp - CTS (Coolant Through Spindle), 20 bar - Machine feet - Central lubrication system - Signal light - Spindle cooler - Machine documentation The machine is barely used and is in absolutely mint condition.

Condition: good (used), Year of construction: 2003, functionality: fully functional, X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 610 mm Control system: Ultimax 4 Table load capacity: 1300 kg Spindle speed: 10,000 rpm Automatic tool changer: 24-position Bljdjz Anxwspfx Aknep Tool holder: SK 40 Drive power: 15 kW Table size: 1500x660 mm Total power consumption: kW Machine weight: approx. 9 tons Space requirement: approx. 4.8x4.5x2.95 m