CNC - Machining Center - Horizontal
HELLER MC 2000

Name: HELLER MC 2000
Brand: HELLER
Availability: InStock

Year of construction

2011

Condition

Used

Location

Halberstadt Germany

CNC - Machining Center - Horizontal HELLER MC 2000

Basic data

Machine type:: CNC - Machining Center - Horizontal

Manufacturer:: HELLER

Model:: MC 2000

Year of construction:: 2011

Condition:: good (used)

Price & Location

Location:: 38820 Halberstadt

Call

Details about the offer

Listing ID:: A20754172

Reference number:: 10598

Update:: 03.07.2026

Description

Ref. -No.: 10598
Manufacturer: HELLER
Type: MC 2000
Year of construction: 2011
Type of control: CNC-Steuerung
Control: Siemens 840 D sl
Storage location: Halberstadt
Country of origin: Hermany
Machine-No.: 50XXXX
X-Travel: 800 mm
Y-Travel: 800 mm
Z-Travel: 1000 mm
Work spindle torque (25% ED): 242 Nm
Tool Taper: SK 40
Numbers Of Tools In Magazin: 54
Tool Piece Magazine With: 80 Pcs./pcs.
Turning Speeds: 10000 RPM
Drive Capacity - Spindle Motor: 17 kW
High-Pressure Pump: 50 bar
Speed range - main spindle: 10000 RPM
Numbers Of Pallets: 2
Size Of Pallet: 630 x 500 mm
Weight Of The Machine Ca.: 13000 t
spindle running time: 7000 H
Operating hours: 14000 H
Preparation area: 4 x 90°
hydraulic pressure: 200 bar

Further information:
Rjdpfox Hn D Rsx Apdech
- The machine has been measured
- The geometry is in excellent condition
- The spindle runs a little rough
- Clamping towers and cutting tool holders are also included
- 2 additional clamping towers
- 2 replacement pallets
- 2-axis servo tool changer
- Scraper conveyor for dry machining
- Cold light in the work area
- Central cooling unit for motor spindle and control cabinet
- Control unit at the workpiece setup station
- NC-controlled rotary table
- Clamping hydraulics

The machine can be viewed under power by appointment.

Seller

Last online: A week ago

Registered since: 2017

69 listings online

Call

Send inquiry

Telephone & Fax

+49 208 4... show

These listings may also fit your interest.

Listing

Germany

18,384 km

CNC Punching Machine
AmadaAC-2510 NT

Call

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Rodpfeza E S Dox Apdoch

See details

Listing

Mitutoyo Crysta-Apex C 776 Mitutoyo Crysta-Apex C 776

Slovenia

18,654 km

Mitutoyo Crysta-Apex C 776
MitutoyoCrysta-Apex C 776

Call

Condition: ready for operation (used), Year of construction: 2004, total height: 2,730 mm, product length (max.): 1,470 mm, CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details. Rsdpfsyhgbpox Apdsch • Accuracy: MPEE = 1.9 µm + 4·L/1000 (with Renishaw TP200 probe) • Temperature compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning card) Additional equipment • Probe head: Motorised Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probing system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Stylus set: Basic stylus set (5 pcs) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning Probes, Laser Probe Support, Export Status Information • Computer system: Industrial PC with Windows 10 operating system

See details

Listing

Wiefelstede

18,341 km

Gearbox 1:30
unbekannt150/145/H175 mm

€115

Fixed price plus VAT

Call

Listing

Cylindrical grinder KELLENBERGER UR 175 x 1000

Contamine-sur-Arve

18,946 km

Cylindrical grinder
KELLENBERGERUR 175 x 1000

Call

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest Rcsdsxy S A Iepfx Apdoh - 1 set of drive knobs - Various wheel holders

See details

Listing

Machining Center - Vertical PINNACLE LV 117 / TNC 640

Dreieich

18,560 km

Machining Center - Vertical
PINNACLELV 117 / TNC 640

Call

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm Rsdoxx A Ewepfx Apdsch z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

See details

Listing

Amurrio

19,741 km

Surface grinding machine
GERRS 15/60

Call

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg Rcodpfx Aovli H Sspdeh

See details

Listing

Lathe - cycle-controlled WEILER E80 x 3000

Hattingen

18,536 km

Lathe - cycle-controlled
WEILERE80 x 3000

Call

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. Redpfx Ajy Ty Ihjpdech The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

See details

Listing

Tool milling machine DECKEL FP1 Aktivdigital

Sonnenbühl

18,638 km

Tool milling machine
DECKELFP1 Aktivdigital

Call

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Rcodpsyg I Nfefx Apdoh Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

See details

Listing

Floor Type Boring and Milling M/C - Hor. PAMA 2/TR 8

Germany

18,384 km

Floor Type Boring and Milling M/C - Hor.
PAMA2/TR 8

Call

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Rsdpfx Aswzyp Uspdoch Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

See details

Listing