Used CNC lathes up to 199mm turning diameter for sale (337)

Condition: good (used), Year of construction: 1997, functionality: fully functional, Siemens control system, spindle bore 65 mm, two turrets, Lrjdpfx Ajzcxk Ejiien live tooling spindle, Hainbuch collet chuck, MBL bar loader laser, chip conveyor.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Siemens control system, 14-position turret, tool holder VDI30, powered tools, Ljdpfx Aijzcxi Ieiern spindle bore 65mm, bar feed MBF, chip conveyor. The machine was completely overhauled in 2013.

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 6,000 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 310 mm, spindle motor power: 7,500 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 2,500 kg, bar diameter (max.): 32 mm, controller manufacturer: MITSUBISHI, controller model: MSC-803, product length (max.): 2,500 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details. Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis) • Swing Over Bed: 515 mm • Maximum Turning Diameter: 400 mm • Standard Turning Diameter: 176 mm • Standard Turning Length: 150 mm • Maximum Turning Length: 303 mm • Spindle Centre Height: 950 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Inner Diameter: 80 mm • Standard Chuck Diameter: 169 mm • Tool Size for External and Facing Tools: 20 x 20 mm • Number of Turrets: 1 • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Tool Selection Logic: Yes • X-Axis Motor Power: 1.5 kW • Z-Axis Motor Power: 2.0 kW Lrodpfx Aijzcwy Soien • Manual Feed Rate: 0 - 1260 mm/min • Programmable Feed Rate: mm/rev • Rapid Traverse X-Axis: 30 m/min • Rapid Traverse Z-Axis: 30 m/min • Positioning Resolution: mm • Coolant Tank Capacity: 123 l • Coolant Pump Capacity: 13 l/min • Lubrication: Automatic Central Lubrication • Power Supply: 380 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 20 kVA • Rated Power: 23 kVA • Full Load Current: 67 A • Spindle Motor Current Rating: 74 A • Interrupting Capacity: 5 kA • Frequency: 50 Hz • Voltage: AC 200 V • Phase: 3 Technical Specification Counter Spindle No Driven Tools No

Condition: new, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball Screw Ljdpjwb Evmofx Aiisrn Item ID: 10912112 Previous Item ID: GM2602.1551 From stock/wear - Offer as shown in pictures -

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: CK01, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 43 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,350 mm, quill diameter: 50 mm, quill stroke: 110 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, WEILER E30x750 lathe (year of manufacture 2007) – ready for immediate use, well-maintained, fully functional (Graz) For sale is a WEILER E30x750 lathe from 2007 in very good, well-maintained, and fully functional condition. The machine has been used reliably and is ready for immediate operation. Inspection is possible by appointment in Graz – either on-site or via video call. Data: Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Condition: fully functional, ready for immediate use Location: Graz Machine operating hours: 26,492 h (The actual operating hours are significantly lower! Based on experience, it can be assumed that the spindle running time (actual turning) accounts for only about 30% to 50% of this (i.e. approximately 8,000 to 13,000 hours) Electrical connection: 400 V Inspection: on-site or via video call by arrangement Technical data: Center height: 165 mm Turning diameter over bed: 330 mm Turning diameter over cross slide: 160 mm Distance between centers: 750 mm Lrodevphv Tepfx Aiijn Turning spindle Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turning spindle: 180 Nm Main drive Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid traverse Feed drive: three-phase AC feed drives Feed range (infinitely variable): longitudinal: 0.001–50 mm/rev (Note: additionally stated 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: additionally stated 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Accuracy Acceptance accuracy: DIN 8605 Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for more information and to arrange an inspection appointment. We will gladly send you further photos and videos of the machine in operation.

Condition: used, Year of construction: 2011, operating hours: 290,478 h, functionality: fully functional, turning diameter: 16 mm, bar diameter (max.): 16 mm, MOBILE TURRET LATHE, EVODEO 16a TYPE, WITH FANUC 16i-TB CNC CONTROL, PNC-DECO, 16MM CAPACITY / 10 AXES, WITH ELITE 220 TOOL CARRIER Including: - Base machine with 10 axes, FANUC 16i-TB - Synchronous rotating chuck, 16mm, including drive - C1 axis function - Polar coordinate function, C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 rotating tools in the end position - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for work without a chuck (maximum part length 50mm) (requires one of the options 0937 to 0941) - TB-DECO ADV programming software MOBILE TURRET S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOLING - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - Stations with 6 positions (3 in the end position and 3 transverse) VARIOUS - Device for evacuating and collecting parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire extinguishing system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) EQUIPMENT - Adaptation for F13 chucks - Long type tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - System for adjusting the chuck clamping from the front for F13 chuck - System for adjusting the chuck clamping from the front for F20 chuck Lredszd Sq Hspfx Aiijn - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals - Swiss 230 V socket - Oil mist extraction device

Condition: used, Year of construction: 2011, operating hours: 348,098 h, functionality: fully functional, TORNOS SA EvoDECO 16a with Elite 220 bar feeder Includes: - Base machine, 10 axes, FANUC 16i-TB - Synchronous 16mm rotating chuck including drive - C1 axis function - Polar coordinate function for C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X1-Y1), not synchronized with S1 Ledpfxszd Shle Aiiorn - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 end-facing rotating tools - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for operation without chuck (maximum part length 50mm) (requires one of options 0937 to 0941) - TB-DECO ADV programming software MOVABLE HEADSTOCK S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOL - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - 6-position stations (3 end-facing and 3 transverse) MISCELLANEOUS - Device for evacuating and receiving parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire protection system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) EQUIPMENT - Adaptation for F13 chucks - Long-type turning tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - Front clamping adjustment system for F13 chucks - Front clamping adjustment system for F20 chucks - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals of choice - Swiss 230 V socket - Oil mist extraction device

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,097 h, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader • Operating hours: 69246 h • Spindle hours: 23097 h • Tool holder: VDI 40 Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information Lredpfx Aox D R Hgeiisn The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Lrsdpfxeug Up Nj Aiijn Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: OKUMA, number of axes: 5, This 5-axis Okuma LB2000EX II was manufactured in 2013. It features a maximum turning diameter of 360 mm and a turning length of 500 mm. The machine includes a robust turret with 12 stations and a main spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EX II horizontal turning machine we have for sale. Contact us for further details. • Maximum turning diameter: 360 mm • Maximum turning length: 500 mm Ledpfx Aezcphusiijrn • Maximum bar capacity: 62 mm • W-axis travel: 500 mm • C-axis indexing: 0.001° • Main spindle nose: ASA 6" • Sub-spindle maximum speed: 6,000 rpm • Sub-spindle motor power: 11 / 7.5 kW • Turret stations: 12 • Driven tool speed range: 45–6,000 rpm • Driven tool motor power: 5.5 / 3.7 kW • Turning tool size: 20 × 20 mm • Boring bar capacity: Ø32 mm Additional equipment • Bar feeder: TOP XF365 (YOM 10/2013, installed 2014) • Hinge-type chip conveyor • Manual tool setter (presetting) • Parts catcher Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 6,140 kg, number of axes: 4, This 4-axis MORI SEIKI NLX 2500Y was manufactured in 2013. It features a maximum swing over bed of 742 mm and a maximum turning diameter of 366 mm. The machine includes a powerful spindle motor with 18.5 kW and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500Y horizontal turning machine we have for sale. Contact us for further details. • Control unit: M730 BM • C-axis0.001° indexing • Maximum swing over bed: 742 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" • Tailstock: MT5 • Tailstock quill diameter: 80 mm • Tailstock travel: 734 mm • Turret stations: 12 positions • Motorized tool positions: 12 • Turret tool coupling: BMT • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum driven tool speed: 6,000 rpm • Driven tool motor power: 5.5 / 7.5 kW Additional equipment • Chip conveyor • Parts unloader arm • Parts conveyor belt • High-pressure pump with paper filter tank • Optical scales Lrjdpjzcphnjfx Aiion Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 5,500 kg, number of axes: 3, This 3-axis MORI SEIKI NLX 2500M was manufactured in 2011. It features a maximum turning diameter of 366 mm and a maximum turning length of 705 mm. The machine is equipped with a powerful spindle motor of 18.5 kW and a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500M horizontal turning machine we have for sale. Contact us for further details. • Control unit: MSX-853IV • Maximum swing over bed: 787 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" • Tailstock: MT5, 80 mm quill diameter, 734 mm travel • Turret stations: 12 • Motorized/live tool positions: 12 • Turret interface: BMT • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum live tool speed: 6,000 rpm • Live tool motor power: 5.5 / 7.5 kW • Operating time: 212 h 39 min • Cutting time: 140 h 19 min • Power-on time: 15,408 h 57 min Additional equipment Lredpfx Aijzcpcxeion • Chip conveyor • Various/assorted tool holders Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck Lsdpoytt A Rjfx Aiiorn • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2015, operating hours: 1,488 h, Hurcon TM6 CNC Lathe Year of construction 2015 Winmax Control Swarf Conveyor Only 1488 Hrs spindle time Immaculate machine ready to go 12 station turret 45mm bar capacity Lredpfx Aozd Hvqeiisn Weight 3500kg Thankyou for taking time to look at this excellent machine that will enhance any CNC workshop

Condition: excellent (used), Year of construction: 2022, Maximum machining capacity: 20 mm (Swiss-type / sliding headstock) Lrjdpfx Ajy A Epioiijn 8 backworking live tools (4 standard) Direct drive rotary guide bushing High-rigidity machine bed for improved stability and accuracy Oscillation cutting capability Advanced direct drive guide bushing system CNC control system: FANUC 32i-B

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,379 h, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, spindle motor power: 30,000 W, overall weight: 6,600 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of slots in tool magazine: 12, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Okuma LB3000II-MYC 950 was manufactured in 2020. It features a maximum turning diameter of 340 mm and a maximum turning length of 950 mm. The machine is equipped with a robust main spindle power of 30 kW and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000II-MYC 950 horizontal turning machine we have for sale. Contact us for further details. • Max Turning Diameter: 340 mm • Max Turning Length: 950 mm • Swing Over Cross Slide: 470 mm • Main Spindle Torque: 700 Nm • Spindle Speed Range: 42 - 4,200 rpm • Spindle Bore: 91 mm • Spindle Nose: A2-8 (KK Size 8) • Front Bearing Diameter: 140 mm • Turret Stations: 12 • Driven Tool Power: 7.1 kW • Driven Tool Torque: 23.7 Nm • Driven Tool Speed: 4,500 rpm • Driven Tool Speed Range: 45 - 4,500 rpm • Rapid Traverse X: 25 m/min • Rapid Traverse Z: 30 m/min • Rapid Traverse Y: 12.5 m/min • Rapid Traverse C: 200 rpm • Tailstock: NC Tailstock • Tailstock Force: 5 kN • Tailstock Taper: MT5 • Chuck: SMW KNCS-N 275-86 A8 • Chuck Diameter: 275 mm • Chuck Through Hole: 86 mm • Draw Tube Bore: 82 mm • Maximum Chuck Speed: 4,700 rpm • Collet Chuck: Hainbuch Spanntop mini Axzug 65 K8 • Collet Capacity: 4 - 65 mm • Collet Chuck Diameter: 204 mm Lsdpfezcf Anjx Aiijrn • Collet Chuck Length: 155 mm • Maximum Collet Chuck Speed: 6,000 rpm • Coolant System: Knoll KF 110/700 • Through-Spindle Coolant (TSC): Yes • High Pressure Coolant: 70 bar • Coolant Tank Capacity: 700 l • Filter Capacity: 110 l/min • Power Supply: 400 V • Phases: 3 • Frequency: 50 Hz • Maximum Connected Load: 38 kVA • Total Current Consumption: 54.9 A • Maximum Motor Current: 219 A • CE Marked: Yes • Driven Tools: Yes • Sub Spindle: No • Chip Conveyor optional, not included: Interlit ISF • Chip Discharge: Right Side • Chip Conveyor Discharge Height: 1,200 mm • Spindle Hours: 5,379 h • Power-On Hours: 20,878 hSpecial equipment or accessories are not included Technical Specification Through-spindle Coolant Yes Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm Ledpozb R Igefx Aiijrn 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 5,000 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,580 mm, spindle motor power: 29,500 W, total height: 2,115 mm, total width: 1,980 mm, overall weight: 8,500 kg, product length (max.): 5,750 mm, number of axes: 3, This 3-axis SPINNER TC800L 110 was manufactured in 2023. The machine is fully functional and includes a steady rest, tailstock, chip conveyor, and oil mist extraction system. It operates on a 3-phase power supply at 400 V. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800L 110 horizontal turning machine we have for sale. Contact us for further details. • Status/condition • Machine powered on and still in operation • Fully functional; steady rest requires sensor bang-up replacement • Configuration and capacities • Turret without AgW (adjustable power supply) • Turret type: axial/radial • Number of tool stations: 12x VDI50 (option: 16x VDI40 or 12x BMT65) • Tool holder type: VDI50 (option: VDI40/BMT65) • Number of driven tools: 12 (option) • Driven tool speed: 4000 rpm • Driven tool power (S1/S3): 2.2 / 5.5 kW • Driven tool torque (S1/S3): 17.5 / 43 Nm (axial), 14 / 35 Nm (radial) • Maximum turning diameter: 500 mm • Maximum swing diameter: 800 mm • Turning length: 800 mm / 1580 mm (L version) • Distance between centers: 800 mm / 1580 mm • Maximum workpiece weight: 800 kg Lrjdpjyyzucjfx Aiien • Axes • Rapid traverse X/Z: 15 / 24 m/min • Spindles • Number of spindles: 2 • Main spindle • Nose: A11 • Bar capacity: 110 mm • Torque (100% / 40%): 175 / 235 Nm • Torque gear stage 2: 700 / 939 Nm • Sub spindle (option) • Nose: A6 • Bar capacity: 52 mm • Chuck size: 210 mm • Power (S1/S6): 15 / 19 kW • Torque (S1/S6): 95 / 121 Nm • Tailstock (if equipped) • Pinole diameter: 110 mm • Taper: MK4 • Stroke: 100 mm • Thrust force: 850 daN • Fluids and tanks • Coolant tank capacity: approx. 235 l (up to 270 l in L-version) • Hydraulic tank: approx. 31 l • Central lubrication tank: approx. 2–3 l • Electrical data • Electrical connection: 3-phase 400 V + N + PE • Frequency: 50/60 Hz (also stated as 50 Hz) • Rated current: 44 A • Fuse protection current: 50 A • Rated current protection: 63 A • Connected load: approx. 40 kVA (up to 50 kVA with 2 spindles) • Protection class: BA 3 (Chap. 3.4.5) • Network type: TN network with grounded neutral point • Recommended protection: without FI switch (recommended) Additional equipment • Steady rest (note: sensor bang-up replacement needed) • Tailstock • Chip conveyor • Oil mist extraction system • Possibly chuck and tool holder (to be confirmed) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,523 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, spindle motor power: 7,500 W, total height: 1,810 mm, total width: 1,640 mm, overall weight: 3,390 kg, product length (max.): 1,990 mm, number of axes: 2, Horizontal turning machine manufactured in 2003. This MORI SEIKI CL 1500 T features a Kitagawa power chuck and includes a tailstock, tool measuring system, and tool holders. With production hours of 1523, this machine offers reliable performance for turning applications. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 1500 T machine we have for sale. Contact us for further details. • Control: MSG-805 V (MAPPS) • Maximum Swing Diameter: 510 mm • Recommended Turning Diameter: 176 mm • Maximum Machining Diameter: 420 mm • Maximum Turning Length: 570 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Diameter: 80 mm • Bar Capacity: 33 mm • X-Axis Servo Motor: 1.5 kW • Z-Axis Servo Motor: 2.0 kW • Rapid Traverse X-Axis: 24 m/min • Rapid Traverse Z-Axis: 24 m/min • Feed Rate Range: 0 – 1,260 mm/min • Resolution: 0.001 mm • Positioning Accuracy X-Axis: 0.004 mm • Positioning Accuracy Z-Axis: 0.004 mm • Repeatability X-Axis: ±0.003 mm • Repeatability Z-Axis: ±0.003 mm • Tailstock Quill Diameter: 85 mm • Tailstock Taper: MT4 • Tailstock Quill Stroke: 120 mm • Tailstock Travel: 340 mm • External Tool Size: 20 × 20 mm • Internal Boring Bar Capacity: Ø32 mm • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Turret Direction Logic: Yes • Coolant Tank Capacity: 150 L • Coolant Pump Flow Rate: 13 L/min • Automatic Central Lubrication: Yes • Power Supply: 400 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC Lodpfxezb Ipno Aiiern • Connected Load: 17.3 kVA • Chuck: Kitagawa B-206 A5 Hydraulic Power Chuck • Tailstock: Hydraulic • Tool Presetter: Included • Tool Holders: Included • Dual Foot Switch: Included • Reinforced Coolant Pump: 20 L/min • Reinforced Coolant Pump Pressure: 5 bar • Reinforced Coolant Pump Motor Power: 1.1 kW • Chip Conveyor: optional, not included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,688 h, travel distance X-axis: 235 mm, travel distance Z-axis: 1,045 mm, overall weight: 2,160 kg, number of axes: 2, This MORI SEIKI SL 1000 was manufactured in 2000. It features a robust Kitagawa Power Chuck and extensive tool holders, making it suitable for various turning applications. With a machine weight of 2160 kg and a rated power of 23 kVA, it offers reliable performance. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 1000 horizontal turning machine we have for sale. Contact us for further details. • Phase: 3 • Frequency: 50 Hz • Voltage: AC 200 V • Full Load Current: 67 A • Spindle Motor Current Rating: 64 A • Interrupting Capacity: 5 kA • Rated Power: 23 kVA • Machine Weight: 2160 kg • Control: MSG-803 (MAPPS) • Chuck: Kitagawa Power Chuck • Power On Time: 7267 h • Auto Machining Time: 6688 h • Extensive Tool Holders Included Lredezb Indjpfx Aiisn • Chip Conveyor: Optional, not included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1996, spindle speed (max.): 6,000 rpm, travel distance X-axis: 191 mm, travel distance Z-axis: 371 mm, number of axes: 2, Horizontal turning machine manufactured in 1996. This MORI SEIKI CL 15 features a Z-axis travel of 371 mm and a spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 15 machine we have for sale. Contact us for further details. technician requiredX-Axis Travel: 191 mmZ-Axis Travel: 371 mmSpindle Speed: 6,000 rpm Lodpfx Aijzb Il Aoijrn Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1990, spindle speed (max.): 4,500 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, spindle motor power: 7,500 W, number of axes: 2, Horizontal turning machine manufactured in 1990. This DMG Mori Seiki SL00 features a Kitagawa power chuck and includes a bar collet chuck for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki SL00 machine we have for sale. Contact us for further details. • Control: Fanuc Lrsdpfx Aezb Ihdjiion • Chuck: Kitagawa Power Chuck • Bar Collet Chuck: Yes • Voltage: 380 V • Phase: 3 • Frequency: 50 Hz • Power Consumption: 18 kVA • Cable: 3 • Chip Conveyor optional, not included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,888 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 200 mm, spindle motor power: 3,700 W, total height: 1,705 mm, total width: 700 mm, overall weight: 1,500 kg, controller manufacturer: MITSUBISHI, controller model: FCA 70 LPC-V (M70V series), product length (max.): 1,683 mm, number of axes: 2, Horizontal turning machine manufactured in 2017. This Citizen MIYANO VC-03 features a maximum turning diameter of 45 mm and a turning length of 50 mm. It includes a rapid traverse rate of 20 m/min for the X-axis and 30 m/min for the Z-axis, along with a robust spindle speed of up to 8000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO VC-03 machine we have for sale. Contact us for further details. - Operating Hours (Power ON): 8494 h- Cutting Time / Operating Time: 3888 h- Number of Processed Workpieces: 8536- Input Voltage: AC 200 V, 3 Phase, 50/60 Hz- Rated Power Capacity: 11 kVA- Full Load Current: 32 A- Short Circuit Interrupt Rating: 2.5 kA- Max. Turning Diameter: φ45 mm (High-precision air chuck) / φ40 mm (Draw collet chuck)- Max. Turning Length: 50 mm- Max. Turning Length with Loader: 40 mm (Fixed: 35 mm)- Spindle Nose Form: Extra flat- Max. Spindle Speed: 8000 min⁻¹ (Standard: 60 - 6000 min⁻¹)- Spindle Draw tube ID / Through-hole Diameter: Ø10 mm- Number of Tool Slides: 1- Slide Form: Comb tool type, horizontal- Number of Controlled Axes: 2 Axes (X and Z axes simultaneously)- X-Axis Feed Motor: 2.7 kW- Z-Axis Feed Motor: 5.8 kW- Rapid Traverse Rate (X-Axis): 20 m/min- Rapid Traverse Rate (Z-Axis): 30 m/min- Tool Size / Shank Size: 20 mm (Options: 10, 12, 16)- Number of Tools (Standard): 5- Tool Boring Hole Size: φ20 mm- Coolant Tank Capacity: 90 Liters- Coolant Pump Flow Rate: 110 / 145 L/min (50/60 Hz)- Coolant Pump Power: 0.18 kW- Pneumatic Air Supply Pressure: 0.5 MPa- Lubrication Unit Tank Capacity: 0.8 Liters- Lubrication Pump Type: MLZ (Discharge amount per shot: 1.5 - 2.5 ccm)- Spindle Center Line Height: 875 mm- Loader Type: Gantry Loader (R Type) - 2 controlled axes, 1 slide, 2 grippers- Loader Max. Workpiece Size: φ40 x 40 mm- Loader Max. Workpiece Weight: 250 g- Loader Feed Speed (Left/Right): 108 m/min- Loader Feed Speed (Up/Down): 90 m/min- Loader Drive System: Rack and pinion drive- Automation Equipment optional not included: Feeding system by Fa. Steyer, separating unit/feeding via conveyor belt, discharge conveyor belt with finished part buffer- Included Features: Oscillating cutting (LFV), Pneumatic power chuck, Tool holders, Splash guard interlock, Machine light, Air blow (Tool & Spindle), CE specification, Coolant level switch, Automatic power shut off, LED warning light Ljdpfjzb Idlex Aiiern Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1996, spindle speed (max.): 8,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 285 mm, number of axes: 2, Horizontal turning machine manufactured in 1996. This SPINNER SB-CNC features an X-axis travel of 250 mm and a Z-axis travel of 285 mm. The main spindle operates at a speed of 8,000 U/min. If you are looking to get high-quality turning capabilities, consider the SPINNER SB-CNC machine we have for sale. Contact us for further details. Lsdjzb Icuepfx Aiiorn Defects: X-axis standstill monitoring triggeredControl cabinet cooling system defective • Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 20 A • Rated Current (IN): 25 A Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,790 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 200 mm, spindle motor power: 1,500 W, total height: 1,600 mm, total width: 700 mm, overall weight: 1,700 kg, controller manufacturer: FANUC, controller model: Series 0i-TD, product length (max.): 1,460 mm, number of axes: 2, Horizontal turning machine manufactured in 2016. This Citizen MIYANO GN 3200 features a maximum machining diameter of 45 mm and a maximum machining length of 50 mm. It includes a spindle speed range of 8,000 rpm and a slide travel of 180 mm in the X-axis and 200 mm in the Z-axis. If you are looking to get high-quality turning capabilities, consider the Citizen MIYANO GN 3200 machine we have for sale. Contact us for further details. - Max. Machining Diameter (Collet Chuck): 40 mm (Pull type) / 35 mm (Fixed type)- Max. Machining Diameter (Air/Power/Diaphragm Chuck): 45 mm- Max. Machining Length: 50 mm- Max. Work Length with Loader: 40 mm- Spindle Nose: Special flat- Through Hole Diameter: 17 mm- Inner Diameter of Draw Tube: 11 mm- Spindle Drive Motor Power: 2.2 / 1.5 kW (15 Min. / Cont.)- Rapid Feed Rate: X-axis: 15 m/min / Z-axis: 15 m/min- Number of Tools: 5 (Standard square turning tool shank size: 10, 12, 16 mm / Drill shank diameter: 20 mm)- Power Supply Capacity: 7.2 kVA- Input Voltage: AC 200 V, 3-phase, 50/60 Hz- Coolant Tank Capacity: 90 L (Separate type)- Lubricating Tank Capacity: 1.5 L (Oil Viscosity VG32)- Spindle Cooling Device Capacity: 7 L (Oil Viscosity VG10)- Air Supply Pressure: 0.4 Mpa (4 kgf/cm²)- Spindle Center Height: 875 mm- Working Hours Count (as of 2026/05/21):- Control On Time: 8,765 Hours- Operating Time: 5,000 Hours- Cutting Time: 3,790 Hours- Parts Counter: 39,713- Total Parts: 759,451- Included Equipment:- High-speed gantry loader (Upper/lower feed rate: 154 m/min, Right/left feed rate: 130 m/min, Max workpiece size: 40x40mm, Max weight: 250g)- Sorting and feeding system manufactured by Fa. Steyer (equipped with 2x MFS 158 speed controller units designated for "TOPF" bowl and "SCHIENE" rail)- Separator / feeding system via conveyor belt- Pneumatic power chuck- Tool holders Technical Specification Counter Spindle No Lrodpfjzb Iamjx Aiien Driven Tools No