Used surface grinding machines for sale (25)

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Pgsdpfxjy Azb Uo Ahyok Kombi KS 1200 grinding head 1,000mm minimum grinding diameter Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Pgodpfxsyz Scge Ahyek Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 1,500 mm, overall weight: 14,000 kg, table load: 750 kg, number of axes: 3, This 3-axis HEINZ STÖCKEL FD 1560 NC-T was manufactured in 2015. It features a maximum grinding area of 1200 × 600 mm and a maximum grinding height of 500 mm. The machine is equipped with a grinding spindle speed of 1400 min⁻¹ and can accommodate a grinding wheel diameter of up to 400 mm. If you are looking to get high-quality surface grinding capabilities, consider the HEINZ STÖCKEL FD 1560 NC-T machine we have for sale. Contact us for further details. • Grinding spindle speed: 1400 rpm • Spindle direction: right • Max. grinding wheel diameter: 400 mm • Nominal voltage: 400 V Pjdeyyctaopfx Ahyogk • Max. grinding area: 1200 × 600 mm • Max. grinding height: 500 mm Additional equipment • 10 bottles included • Extra roll of DIA film • Assortment of profile and surface grinding wheels

Year of construction: 2007, operating hours: 40,173 h, condition: ready for operation (used), travel distance X-axis: 630 mm, overall weight: 2,600 kg, number of axes: 3, This 3-axis JUNG JF 525 N surface grinding machine was manufactured in 2007. It features an X-axis travel of approximately 630 mm and has a machine weight of 2200 kg. If you are looking to get high-quality grinding capabilities, consider the JUNG JF 525 N machine we have for sale. Contact us for further details. • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Nominal current: 30 A • Connected load: 16 kVA • Supply fuse: 35 A Pgedpfx Ahoyycqfoyjk • Operating hours: approx. 40,173 h

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 600 mm, overall weight: 2,700 kg, number of axes: 3, This 3-axis BLOHM JUNG JE 525 P surface grinding machine was manufactured in 2009. It features an X-axis stroke of approximately 600 mm and has a machine weight of 2200 kg. If you are looking to get high-quality grinding capabilities, consider the BLOHM JUNG JE 525 P machine we have for sale. Contact us for further details. • Operating voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Rated current: 30 A • Connected load: 16 kVA • Supply fuses: 35 A Pjdpfxoyyclvo Ahyegk

Year of construction: 1999, operating hours: 52,678 h, condition: ready for operation (used), travel distance X-axis: 660 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 280 mm, overall weight: 3,500 kg, number of axes: 3, This 3-axis JUNG J 630 E surface grinding machine was manufactured in 1999. It features a travel of 660 mm in the X-axis, 360 mm in the Y-axis, and 280 mm in the Z-axis. With a robust machine weight of 3000 kg, this machine is designed for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the JUNG J 630 E machine we have for sale. Contact us for further details. • Operating voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Rated current: 30 A • Power: 16 kVA • Main fuses: 35 A Pgjdpeyycinofx Ahyok

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Podpfxeyw Rhmo Ahyjgk Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: Pgjdpsywuqrefx Ahysk 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. • Grinding table • Grindable surface: 450 × 150 mm • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P Pedpfxoyiffge Ahyogk • Headstock up/down motor: 0.4 kW

Year of construction: 2018, condition: ready for operation (used), overall weight: 1,900 kg, total height: 1,900 mm, spindle motor power: 3,700 W, product length (max.): 1,950 mm, number of axes: 3, This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information. • Table size (L × W): 300 × 600 mm • Electromagnetic chuck size (L × W × H): 300 × 600 × 74 mm Pgedpeydpn Rsfx Ahyek • Grinding wheel size (Ø × width × bore): 355 × 38 × 127 mm Additional equipment • Optional: Tools • Optional: Clamping devices

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Podsx D Hi Ropfx Ahyegk Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Year of construction: 2008, condition: ready for operation (used), overall weight: 8,500 kg, total height: 2,470 mm, This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table clamping area: 1500 x 600 mm / max. Table load (with magnet): 1300 kg longitudinal table travel: 1600 mm / table slots, number/width: 3/16 pcs/mm / table feed: 7-25 m/min Pgedpfxex D H Rho Ahyek • Vertical y distance from table to spindle center: 600 mm / vertical handwheel pitch: 0. 002 mm / feed per handwheel revolution: 0. 5 mm / automatic grinding feed ahd: 0. 005-0. 04 mm / automatic grinding feed wm1: 0. 002-0. 2 mm / vertical rapid traverse: 230 mm/min / transverse z travel: 660 mm / transverse feed per stroke: 0. 1-12 mm / transverse rapid traverse: 1250 mm/min / handwheel pitch: 0. 02 mm / feed per handwheel revolution: 5 mm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm Dimensions Machine Depth 6200 mm

Year of construction: 2000, condition: ready for operation (used), overall weight: 8,100 kg, number of axes: 3, This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine. • Grindable size: 1,000 x 750 mm • Cross travel: 750 mm • Longitudinal travel: 1,000 mm Pgedjygl Hzepfx Ahysk • Grinding height: 600 mm • Longitudinal speed: 1–38 m/min • Usable table surface: 1,100 x 500 mm • Permissible table load: 1,400 kg • Wheel dimensions: Ø 400 x 30 mm • Rotation speed: 1,450 rpm

Year of construction: 1996, condition: ready for operation (used), overall weight: 8,600 kg, This FAVRETTO MC 130 surface grinding machine was manufactured in 1996. It features a table size of 1300 mm by 500 mm and is equipped with a DIGIT Favretto CNC system. The grinding wheel measures 406 mm in diameter and 152.4 mm in width. It has a powerful 15 kW grinding spindle motor and weighs 8,600 kg. Contact us for more information about this machine. Pedpex U Dnnsfx Ahyegk • Table Length: 1300 mm • Table Width: 500 mm • Grinding Wheel Diameter: 406 mm • Grinding Wheel Width: 152.4 mm • Grinding Wheel Bore: 100 mm • Grinding Spindle Motor Power: 15 kW

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 for small parts with 10 chambers. Accessories: 8 x plastic containers, 4 of which come complete with lid and holder. Further details to follow. The machine can be viewed under power. Pgedjvpikxjpfx Ahyjk

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. Psdpfovvu Snox Ahyjgk The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: excellent (used), Table width 63cm Table length 250cm 2 knives 4kW motor Pgedpfx Ahsit T Dajyok

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Podpoxzuuvsfx Ahyogk Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: good (used), Year of construction: 2001, The Fladder 300/GYRO is a machine designed for processing flat surfaces (e.g., sheets, aluminum parts, steel components, or plastics). Main applications: - Deburring (removal of sharp edges), - Cleaning surfaces after laser, plasma, or punching processes, - Edge rounding, - Surface preparation for painting/coating, - Removal of rust, scale, and residual oxides. Technical specifications: Model: Fladder 300/GYRO-1300 VAC Pedew Uabpjpfx Ahyegk Working width: 1300 mm Power supply: 3 × 400 V, 50 Hz Current consumption: 63 A Protection class: IP54 Motors: independent drives for working units and conveyor belt Conveyor belt feed speed: adjustable GYRO system: orbital-rotational working heads (uniform deburring and surface finishing) Equipment: conveyor belt with dust extraction (VAC), control panel, emergency STOP button Year of manufacture: 2001 Machine in good technical condition Complete, ready for operation On-site inspection possible

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us! Pgedpfxowdnb Ro Ahyok

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Podsgxug Nopfx Ahyjgk Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Psdpfxjgxug Ts Ahyogk Noise level: > 85 dB(A) spindle diameter: 35 mm Buffer: 50 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tension, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers, with buffer 50 mm

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us! Pjdpfx Ahexby Sgoyjgk

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel max. diameter 80 mm x 80 mm Pgjdpfx Aegxuhmehyok

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Psdpfjgxug Eex Ahyegk Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers With top roller for free belt grinding