Used Scheer Hm 40 D for sale (68)

Condition: like new (used), Year of construction: 1998, functionality: fully functional, SCHEER TW 4-2 Stair Stringer Milling Machine + Router HM 18E Everything is in excellent optical and technical condition, like new Fully functional The device comes from a hobby carpenter and has therefore seen very little use, still like new You can start working with it immediately All equipment is from year of manufacture 1998 All are professional-grade machines for commercial use—no DIY store junk SCHEER TW 4-2 Stair Stringer Milling Machine Allows you to mill steps and risers very precisely and accurately Curved joint surfaces can even be machined using the handwheel Equipped with hardened guide shafts, on which the cross support with router is mounted Features ball bearing guides, making the unit very easy, precise, and safe to operate Can be securely clamped to stringers with 2 quick-release clamps Cross support features 2 stops each for both longitudinal and transverse directions Includes 2 angle stops Includes manual Milling travel: 750 mm longitudinal, 75 mm transverse SCHEER HM 18E Router Very good condition, almost no signs of use Extremely robust thanks to the triple-bearing router spindle Excellent concentricity and flawless milling results Precise column guidance and torsion-resistant router table Constant speed even under high loads High-performance motor ensuring minimal fatigue Long service life due to soft start (full-wave electronics) Bearings are in good condition The machine is suitable for the toughest milling operations in continuous use Good visibility of the cutter shaft; chips are blown away by a powerful fan A wide range of accessories are available for grooving, rebating, dowelling, dovetailing, etc. 220V, 2000W Speed adjustable from 10,000 to 18,000 rpm Fully functional Isdpfsxbt Ubsx Affstr With M16 female spindle (adapters and other fittings can be ordered separately) Includes 30mm guide ring and extraction hood

Condition: used, Engine: 1.1 kW // 2,700 rpm. Ijdpfx Ajlfcnwjffjtr * Foot operation.

Condition: refurbished (used), cutting length (max.): 4,200 mm, cutting height (max.): 70 mm, Panel Dividing System SCHEER PA 4027 – 4200 x 4200 The PA 4027 is a high-performance, electronically controlled beam saw for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial use in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good (completely overhauled by our technicians) Functionality: Fully operational Warranty: 12 months CE compliant / BG guidelines compliant / dust tested (threshold < 2 mg/m³) Main Technical Data & Features: Cutting length / table length / fence depth: each 4200 mm Maximum cutting height: 70 mm 3-position cutting height adjustment Automatic forward & return travel of the saw unit Feed speed: 2 – 50 m/min (infinitely variable) Return speed: 70 m/min Regulated saw unit for reduced withdrawal speed from the material Scoring saw adjustable from outside – without opening the protective cover Residual cut device for precise trimming cuts Semi-automatic angle-pressure device: adjustment range up to 2400 mm Air cushion tables: 1 square stop table 2 workpiece support tables Closed Pertinax surfaces in the square stop area Pusher with parallel fence: 7 clamping fingers Servo drive Feed: max. 25 m/min Return: max. 40 m/min Integrated extraction channels in machine base & pressure beam Protective hood locking with lamella safety curtain Itsdpfevxid Djx Affor Control & Operation: New control unit with modern Ubuntu Linux operating system Proven SCHEER user interface maintained 15" flat screen, keyboard, and mouse on swiveling operator panel Graphical display of cutting patterns & workflows PLC control: Siemens S5 Network capable – LAN & WLAN (compatible with Windows, Linux, Mac, Novell) Remote maintenance & software updates possible via Internet Software / Programs: OPTIMAX (optional): Office optimization, offcut calculation, material requirements OPTIMIN: Direct optimization on the machine PC Processing via USB or online possible Free label configuration & label printing during cutting (optional) Supports manual, automatic, and special operating modes (e.g., grooving, veneered panels) Reliability in Continuous Operation: This machine is in operation worldwide – under extreme conditions. Whether in the dry climates of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4027 runs reliably in 3-shift systems – 365 days a year – and delivers exceptional stability and endurance. Guarantee: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) 📞 Contact us for a personalized quote or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training are optionally available.

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Itjdpfx Afeb A Iiasfjr Price: per piece -Weight: 25 kg/piece

Condition: used, Electro-pneumatic universal dowel hole drilling machine Scheer type DB4 for precise drilling of dowel holes in wood materials. The machine enables efficient and precise work thanks to several synchronously working, horizontal and vertical drilling spindles. Ideal for furniture and interior construction as well as for series production in woodworking. division: 32 mm drilling spindles: 2 x 25 Spindle distance: max. 768 mm Itedpjv Hnr Asfx Affsr

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Itsdow I Ulpopfx Affjr Location: Flörsheim Availability: short notice

Year of construction: 1998, condition: ready for operation (used), Technical Specification Max. Cutting Length 3100 mm This SCHEER PA 4136 panel saw was manufactured in 1998. It features a cutting length of 3100 mm, cutting height of 70 mm, and a saw blade projection of 77 mm. Equipped with a 7 kW main saw unit and a 1.1 kW scoring motor, it offers a saw feed speed of up to 40 m/min. Consider the opportunity to buy this SCHEER PA 4136 panel saw. Contact us for more information. Itodpjx D E Dmefx Affsr Application Types Sawing (Wood)

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm Itjdpfx Ash I N Sqeffor - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: not inspected (used), functionality: unexamined, 5 kW 20 press cylinders 3 press cylinders individually with foot valve Each set of 5 cylinders individually disconnectable with hand valve Assembly machine - cutting length: 9300 mm Isdpfx Asx Hiqrjffotr Total height: 2100 mm Pressing height: 1300 mm Extraction port: 120 mm

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw Iedeb A Hnhspfx Affjtr -Cutting length: 3000 mm -with extraction

Condition: used, Scheer Type DB 5 dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction as well as for precise joints in interior design. Includes a comprehensive range of dowel drill bits. drilling spindles: 21 division: 32 mm passage width: max. 1.000 mm Itjdpfxewp E Uxe Affer Pivot: pneumatic

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Isdpowi Adkefx Affotr Working length: 3000 mm Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 199224, Veneer machine for sale. 220/380 V, 2.5 kW, 50 Hz Itedpfx Afjx Arm Sefsr

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Itodjv Trlmjpfx Affer Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Isdpsvvkazjfx Affjtr Storage location: Nattheim

Year of construction: 2008, condition: good (used), strand pelletizer Scheer SGS 100-E4 function tested Ijdpfxehfmrts Affjtr Immediately available

Condition: excellent (used), FM 2/8 veneer saw 3100 mm stop, extraction Itjdpfx Afjxpvycefjr

Condition: used, Used machine Veneer splicing machine Itjdpfowka I Nex Affsr Machine number: 1262050 Motor power: 2.5 HP Motor speed: 2,810 rpm Cutting length: 3,100 mm Saw blade diameter: 180 mm Rear support plate missing Movable Transport dimensions approx. 3,700 × 700 × 1,450 mm Weight approx. 200 kg Availability: short notice Location: Solingen

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Isdpfxjrrdtxe Affstr Grinding wheels: mm Table speed: m/min Table spindle center max.: mm max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Weight: 5 tons Dimensions: mm

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Ijdpfxjr I E Hcs Affetr dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Itjdpfxevvkble Affjr Storage location: Nattheim

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Saw blade diameter: 180 mm Ijdoxf Tqwspfx Affotr Rear support table Weight approx. 300 kg.

Condition: used, Used machine Ijdpfjw I U Evjx Affstr Condition: Fully functional Technical data: Working length: 3000 mm Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Iedpekwg Rcefx Affjtr Dimensions: 140x88x160 Weight 420 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1981, Used machine Itjdpfoxx D D Iox Affjr Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim