Used Attachment for sale (5,046)

Condition: new, 0.6m3 Polyp attachment from stock Lajdpfevk Dv Esx Apmsf Rotation is not included

Condition: used, Bomag BPR 50/55 D | Used Attachment - Other Ljdpfx Apezvy Azomoaf 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Plate does not start, according to the workshop master unknown engine damage, starter turns and compression present according to noise. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41268 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) Lodsh Nrh Ujpfx Apmoaf ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FREY F-LINE F260 + KL6 | Vacuum filler with an attachment for forming kebab slices (Kebab Line) Manufacturer: FREY Maschinenbau GmbH Model / Type: F-LINE F260 + KL6 Lasdpfx Aszvgtgopmof Serial number: F260PT1392551 Year of manufacture: 2011 Power supply: 400 V / 50 Hz / 3-phase Power: 10.45 kW Filling capacity: up to 7,300 kg/h Maximum filling pressure: up to 50 bar Vacuum pump capacity: 21 m3/h Hopper capacity: approx. 300 liters Portioning range: 5 - 100,000 g Maximum portioning speed: up to 1,120 portions/min Control system: FREY Touch Control TC 733 touchscreen This set consists of a FREY F-LINE F260 vacuum lobe filler and an automatic FREY KL6 forming module, representing a professional, industrial line designed for continuous portioning and precise shaping of meat slices for the production of Döner Kebab rolls. The core of the filler is a modern, maintenance-free servo drive and a lobe pump system with an efficient vacuum pump (21 m3/h), ensuring optimal de-aeration of the filling, consistent weight, and an ideal cross-sectional structure of the finished product. The FREY KL6 system significantly automates and speeds up the process of arranging meat slices with a constant diameter and thickness, eliminating the need for manual portion selection and reducing labor costs. This set is ideally suited for meat processing plants, companies producing semi-finished products for the HoReCa industry, and specialized kebab manufacturers. The user-friendly FREY TC 733 control panel with a digital interface allows for storing up to 200 recipes and dynamically adjusting operating parameters in real time.

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar Lasdpfx Apoiz A E Eemsf MARCELS MASCHINEN AG

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine Lsdpfx Aeu Dhkdjpmoaf e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) for pre-shredding cohesive/clumpy material

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. Ljdpfx Aezt Dmfopmsaf An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Manufacturer: JUKI, Japan Lasdjy Nd Hgspfx Apmof Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Year of construction: 1985, condition: good (used), machine/vehicle number: 108, Order No. 15256 Technical data: - Flexible shaft 1500 mm - 5 speeds - Belt sanding attachment Ljdek Ea Taopfx Apmeaf - Power supply 380 V - Mobile base - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm Laedpfxsd E A I Ne Apmjf - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, functionality: unexamined, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Lasdpfx Aswtnnpepmof

Condition: used, functionality: unexamined, Ferwood Code: RU0011652 - Manufacturer Code: K6343K0944 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Laodpfjwtzcyjx Apmef

Condition: used, functionality: unexamined, Ferwood code: RU0011651 - Manufacturer code: K6343K0949 - Condition: Used - Functionality: Not tested - If interested, we offer reconditioning service, contact us. Lajdpfjwtnqksx Apmef

Condition: used, functionality: unexamined, Ferwood Code: RU0011653 – Manufacturer Code: K6343K0948 – Condition: Used – Functionality: Not tested – If interested, we offer a refurbishment service, please contact us. Ledpswtzd Djfx Apmjaf

Condition: used, Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knifeYear 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Lodpfx Apsrgbzhjmoaf

Condition: excellent (used), functionality: fully functional, Radius grinding attachment for DECKEL S11 - Ref ISOG : 2601X00 Laedpjzkur Hefx Apmsf

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Replaceable jaws: soft attachment jaws, 3 sets = 9 pieces -Type: Jaw width 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete Laodpfxezhuw Re Apmjf -Transport dimensions: 225/85/H45 mm -Weight: 5.1 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 2 pieces -Type: Ø 79.5 mm Mounting 29/33 mm Lodpfjzhlaiex Apmeaf -Type: Ø 80 mm Mounting 37/40 mm -Submission/Price: complete -Transport dimensions: 160/80/H90 mm -Total weight: 3.8 kg

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 3 pieces -Recording: MK5 -Length: 345 mm -Dimensions: see photos Ledpfjucmqdjx Apmsaf -Submission/Price: complete -Transport dimensions: 345/240/H40 mm -Weight: 9.9 kg

Condition: used, End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos Lodpfx Aefvcxzjpmeaf -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Condition: good (used), Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch Laodpfx Aob Ri Tdjpmef -Integrated reversing gear with fast reverse -Thread sizes: M1.4-7 -Recording: MK2 -Dimensions: 70/230 mm -Weight: 2 kg

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete Lasdpfxegccucs Apmof -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: hard jaws Laedpfx Apjqyi U Semjf -7 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 700/450/H120 mm -Weight: 101.6 kg

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills Lodpfx Asyrgwxepmsaf -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills Ljdpfx Aeuhr Raepmjaf -Mounted tool holder: 2 pieces -Recording: MK4 -Length: 380 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 380/100/H30 mm -Weight: 3.2 kg