Used Scheer Zf 630 for sale (71)

Condition: excellent (used), Year of construction: 1984, used, top condition, hardly used Make Scheer Dqmmnt Type FM5 - 3100 Year of manufacture 1984 Mach. No. 41134 Motor 1.8 kW Saw feed / handwheel Cutting length 3100 mm Saw blade diameter: 180 mm Pneumatic tension Rear support table Parallel stop Chassis Iodpfxovld I De Afieih Space requirement approx. 4200 mm x 1200 mm x 1200 mm Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1996, Max. cutting length: 3100 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Stop system: manually adjustable stop rake Stop indicator: scale Extraction channel: Yes Extraction system: external extraction Feed type: manual Jointing unit: with diamond-tipped saw blade (resaw) Machine type: stationary Weight approx.: 850 kg Dimensions: 4400 x 1180 x 160 mm Motor power: 2.2 kW Extraction diameter: 80 mm Storage location: Nattheim Iisdpfx Afsxnlcqoioh

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Ijder I E Hcspfx Afieih dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Iijdpoxf Tqwefx Afieh Cutting length: 3000 mm Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor Iijdexhg Ibjpfx Afish - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, Year of construction: 1992, Manufacturer: Scheer Model: FM8-3100 Used machine Not operational Pressure beam is warped; needs to be straightened Year of manufacture: 1992 Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear fence Weight approx. kg: 400 Iisdpfxoxdpkko Afish Location: Röllbach Availability: short notice

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Iiodpfxjv Trlme Afish Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Iiodpfx Aovvkazsfieh

Condition: excellent (used), CATALOGUE NUMBER 6608 TECHNICAL DATA - number of spindles 21pcs - spacing of extreme spindles 640mm - spindle spacing scale 32mm - max drilling depth 60mm - vertical drilling width 60mm - drilling adjustment up/down and at an angle - right-left drills, mounted with Allen keys - pneumatic clamps 2pcs - table surface dimensions 490x1040mm - height to the table surface 920mm - main engine 2.2kW - working pressure 6-8bar - dimensions l/w/h 2830/1150/1320mm - weight 442kg Isdpfx Afoh I N Sqeioih - German production - original DTR documentation - unpainted - mobile Net price: PLN 7900 Price net: 1850 euros depending on price, 4.25 euros (Prices may vary in case of large fluctuations)

Condition: ready for operation (used), Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Iedpfxsxd Aupe Afijih

Condition: like new (used), Year of construction: 1998, functionality: fully functional, SCHEER TW 4-2 Stair Stringer Milling Machine + Router HM 18E Everything is in excellent optical and technical condition, like new Fully functional The device comes from a hobby carpenter and has therefore seen very little use, still like new You can start working with it immediately All equipment is from year of manufacture 1998 All are professional-grade machines for commercial use—no DIY store junk SCHEER TW 4-2 Stair Stringer Milling Machine Allows you to mill steps and risers very precisely and accurately Curved joint surfaces can even be machined using the handwheel Equipped with hardened guide shafts, on which the cross support with router is mounted Features ball bearing guides, making the unit very easy, precise, and safe to operate Can be securely clamped to stringers with 2 quick-release clamps Cross support features 2 stops each for both longitudinal and transverse directions Includes 2 angle stops Includes manual Milling travel: 750 mm longitudinal, 75 mm transverse SCHEER HM 18E Router Very good condition, almost no signs of use Extremely robust thanks to the triple-bearing router spindle Excellent concentricity and flawless milling results Precise column guidance and torsion-resistant router table Constant speed even under high loads High-performance motor ensuring minimal fatigue Long service life due to soft start (full-wave electronics) Bearings are in good condition The machine is suitable for the toughest milling operations in continuous use Good visibility of the cutter shaft; chips are blown away by a powerful fan A wide range of accessories are available for grooving, rebating, dowelling, dovetailing, etc. 220V, 2000W Iodpexbt Ubefx Afieih Speed adjustable from 10,000 to 18,000 rpm Fully functional With M16 female spindle (adapters and other fittings can be ordered separately) Includes 30mm guide ring and extraction hood

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: PA 4136, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, main saw diameter: 305 mm, overall weight: 3,000 kg, compressed air connection: 6 bar, space requirement length: 7,550 mm, space requirement width: 5,450 mm, Equipment: rotational speed infinitely variable, scorer, Panel Dividing Saw SCHEER PA 4136 We are offering a used panel saw for the dividing of wood-based materials. The machine will remain in operation until the end of September or can, by arrangement, be dismantled by the buyer until that time. At the beginning of October, the machine will be dismantled by us. In that case, the price will increase by the dismantling costs. Operational Status: Fully functional CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Features: Iedpfx Afsw Tlvcjijih - Longitudinal saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (return automatically lowered) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Rapid return speed: 50 m/min - Extraction channels in the machine base & pressure beam - Scoring saw adjustable from outside (without opening the hood) - Guard locking with lamella curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts up to 5 mm Saw motor: 7.0 kW | Scorer motor: 1.1 kW (switchable) Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with pressure claw for cross-cuts - Adjustment range: 2400 mm - Fully automatic, controlled via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the angle stop area Operating system: MS DOS Multifunction keyboard in swiveling control panel Graphical display of cutting plans and sequences Software / Programs: - OPTIMAX: office optimization, waste calculation, material requirements - OPTIMIN: direct optimization on the machine PC with parts list entry - Processing via USB, floppy disk or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angle stop table HP 5085: 1,720 x 800 mm | Pertinax surface - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax surface - Air cushion system LK 5030 integrated into both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered

Condition: used, Used machine Cutting length 3000 mm with handwheel clamping Iedpfx Ajw I Ul Aefijih Availability: short term Storage location: Röllbach

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Iiedevvkblepfx Afioh

Year of construction: 2008, condition: good (used), strand pelletizer Scheer SGS 100-E4 function tested Iodpfx Afohfmrteisih Immediately available

Condition: used, cutting length: 3050mm workpeace clamping: Handrad Iisdpfxem H Uxyj Afish suction connection: yes

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse Iedpfx Afew A Acteieih

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm Iijdpfx Aorrdtxjfioh max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Weight: 5 tons Dimensions: mm

Condition: used, Year of construction: 1982, Used machine Condition: good Iodpfx Afjw I Ulpoieih Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Location: Hochheim Availability: short term

Condition: used, functionality: fully functional, Scheer DB 22 double-sided line boring machine, 2 drilling motors of 1.8 kW each, 32 mm pitch, 21 spindles per beam, good condition, dimensions 3100 x 1100 x 1800 mm, portal passage 850 mm, weight 345 kg Iiedpfx Afjw Adrcsieh

Condition: used, Used machine Iodpfxow I Um Ho Afieih Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Used machine Condition: Functional Technical data: Working length: 3000 mm Iisdpfx Afow I U Evoioh Handwheel tension Power unit 2 kW Availability: short term Storage location: Hochheim

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Iisdpow I Uhdofx Afioh

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW Iiodpsw Nabxjfx Afieh

Condition: used, Year of construction: 1981, Used machine Iedpfxow I Ukre Afieih Year of construction: 1981 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety air clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm with attached oil damping Height adjustment 80 mm Drilling depth 80 mm with chassis Weight 420 kg Availability: short term Location: Solingen