Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) Cjbeb Ilbfs Hdldlsgt throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Cgob Hdldewhkywjlst

Condition: good (used), Year of construction: 2017, operating hours: 9,495 h, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, mileage: 9,495 km, lifting capacity: 3,000 kg, EXPECTED This TRIPLEX forklift from the brand STILL comes from 2017 and is in good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 6,040 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT;Drive-through height of 2,725 mm;Forks 1,200 mm;The battery is equipped with an external charger;Make an appointment for a test drive;Video to followFINANCIAL LEASE POSSIBLE, ask about the conditions Csbowhk A So Hdldlogt Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner

Condition: used, Year of construction: 2005, Laminating machine Cgjb Hjwhkz Ijdldljt GBC Voyager 3 Year: 2005 - Flat pile feeder - Laminating unit (roll) - Sheet separation - Delivery

Condition: excellent (used), mileage: 732,445 km, power: 308 kW (418.76 HP), first registration: 11/2013, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, loading space length: 9,150 mm, Equipment: tail-lift, Volvo FM410EEV/Carrier/LBW/Air Conditioning • Manufacturer: Volvo • Type: FM410 EEV • Mileage: 732,445 km • First registered: 11/2013 • Unladen weight: 12,900 kg • Payload: 13,100 kg • Gross vehicle weight: 26,000 kg • Power: 308 kW/418 hp • Transmission: Automatic • Wheel configuration: 6x2 • Suspension: Air/air • Carrier Supra 950U • -30°C cooling • Air conditioning • Rear view camera • Roof hatch • Wüllhorst tailboard • Lift-steer axle • Euro: EEV1 • German vehicle • German papers • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. Cjb Hdowhktweldlsgt - Sale subject to our terms and conditions.

Condition: excellent (used), Year of construction: 1999, Sheet metal press brake MECOS Mod SYNCHRO 30/125. Useful bending length 1350 mm. Bending pressure 30 Ton. N 4 axes Y1-Y2-X-R. Piston stroke 110 mm. Lateral recess 220 mm. Updated ESA CNC control. Passage between uprights 1250 mm. Csb Hdldjv S Arzeljgt Distance between ram table 250 mm. Motorized back gauge. Upper locking type Promecam. Motor power 7.5 kw. Machine weight 2900 Kg.

Condition: used, Dear Sirs, We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. Ceb Hdljp Dhbjdlsgt In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Furthermore, we can offer you the electric chain hoists at favorable conditions.

Condition: used, Year of construction: 2011, Overview  This carton case sealer was manufactured in 2011 by American company 3M. The machine was used for sealing carton cases and is equipped with a gravity outfeed conveyor. It is in good condition and immediately available, as the production at the facility stopped in 2022. Technical data  Capacity: 13 to 30 cartons per minute (depending on carton dimensions) Formats: Carton cases Dimensions (carton specifications): Length: 150 mm – Unlimited Width: 150 mm – 550 mm Height: 120 mm – 620 mm Scope of Delivery 3M Adjustable Carton Case Sealer Gravity outfeed conveyor Cgsb Hdldswhktdjlet

Condition: good (used), Year of construction: 2013, operating hours: 8,036 h, lifting height: 4,765 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, mileage: 8,036 km, lifting capacity: 2,000 kg, EXPECTED Cgsbewhkzze Hdldljt This triplex electric forklift from the German brand STILL is from 2013 and is in good condition;Capacity is 2,000 kg;Lifts to a height of 4,765 mm;Drive-through height is 2,160 mm;Equipped with a FREELIFT and SIDESHIFT;Forks are 1,200 mm;Battery from 2024 is equipped with an external charger;Video will follow

Condition: reconditioned (used), Functionality: fully functional, Machine characteristics : Centre height : 125 mm ( 175 mm with the heights ) Distance between centres : 600 mm Grinding wheel: Diameter 400 mm Width 50 mm Bore 127.0 mm Angular displacement : 270 ° Work piece spindle head: from 20 rpm up to 400 rpm Spindle taper: 5 MT Taper in tailstock: 3 MT Table angular displacement : 10 ° Table speed: stepless up to 6.0 m/min Cgob Hdldowhixxjlet External Grinding wheel motor : 4.0 Kw Workhead spindle motor : 2.2 Kw Machine's weight about : 2700 kg Overall dimensions machine: Length : 2580 mm Width : 1680 mm Height : 1670 mm The machine is fully retrofitted and it includes: - New electric cabinet and new electric diagram - New motor and frequency variator for the workhead - 2 axis DRO - Cooling tank - Geometry made according to the Kellenberger protocol - Lot of accessories

Condition: good (used), Year of construction: 1999, thermal exhaust air incineration plant, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -System: is currently still in operation and can be demonstrated -Protocols: regarding maintenance and emissions are available -Documentation: fully available -Combustion chamber temperature: 850° C Cob Hdldevtzdljlegt -Heating medium: natural gas -Heating value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Year of construction: 2009, Condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Csb Hdljx Davedlsgt Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: good (used), Year of construction: 2013, operating hours: 10,417 h, lifting height: 4,765 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, mileage: 10,417 km, lifting capacity: 2,000 kg, EXPECTED Cob Hdldowhkzhjlogt This triplex electric forklift from the German brand STILL is from 2013 and is in good condition;Capacity is 2,000 kg;Lifts to a height of 4,765 mm;Drive-through height is 2,160 mm;Equipped with a FREELIFT and SIDESHIFT;Forks are 1,200 mm;Battery from 2024 is equipped with an external charger;Video will follow

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm Ceb Hdldjpgmtwsljgt backgauge manually adjustable up to: 540 mm weight: 285 kg

Condition: as good as new (ex-display), A demonstration double miter metal cold circular saw with 350mm circular saw blade Cutting range round/rectangle 90° 120/ 140x100 mm round/rectangle 45° right and left 100/ 100x100 mm Cgeb Hdldjpgmngslst speed 18/ 36 m/min Further tech. Data see pdf. Document Tech. Data and dimensions Errors excepted

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel Cgjb Hdlspgmufedlot belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Cob Hdlopai Dhjdlegt Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec Cgeb Hdldepgmtzolst power: 2,2/ 2,8 kW 400V/50Hz weight: 90 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard Cgeb Hdlopgmqisdlet documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Cgeb Hdlspgmq Uedlst Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Year of construction: 1997, Condition: good (used), A vertical machining center from DECKEL MAHO, used in good condition. Equipment - CNC control PHILIPS DIALOG 112 - Direct path measurement (rulers) - tool magazine - Electronic handwheel - Central lubrication - Spindle cooling - documentation Travel X/ Y/ Z 700/ 550/ 500 mm spindle speed infinitely variable 15.000 rpm table dimensions 900 x 550 mm table load 800 kg working feed X/ Y 1 - 10000 mm/min rapid traverse X Y Z 30 m/min rapid traverse Z 20 m/min tool magazine 30 places Tool holder SK 40 Rated power 50 KVA Rated current 70 A Compressed air supply 6 bar Cgeb Hdloi Dt Dkodlst Transport dimensions L x W 3.3 x 2.4 m Machine height 2,6 m Weight of the machine 7000 kg Technical data and dimensions: Errors excepted.

Condition: used, A used well preserved guillotine shear Vöest Alpine Cjb Hdlspgmpdodlegt cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: as good as new (ex-display), A demonstration double miter matall cold circular saw with circular saw blade 275mm Cutting range Csb Hdopgml Njldlegt round/rectangle 90° 70/ 90x45 mm round/rectangular 45° left and right 65/ 70x45 mm speed 42/ 96 rpm Further tech. Data see pdf. Document Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Ceb Hdspgmkyoldlsgt Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cutting speed 32/ 66m/min Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted.

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Cgjb Hdldsdzy Uyjljt Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Table load: 3000 kg