Power tools Offers
5
Nail gun, nail gun
-Bolt gun Hilti DX 460
-Magazine: MX 72
-Suitcase
-Number: 2x shooting devices available
Liaif
-Price: per piece
-Weight: 6 kg
2
The Hydraulic Power Pack was few times used for demonstration to end customers.
Deq2glrn8
3
weight 10 kg
Rsypdvqk
5
connected load frequency - V
Izpq92q
weight 15 kg
range L-W-H 600 x 250 x 150 mm
1
1 used battery charger Tebetron for electric forklift 24 V / 100 A
Npoi9
5
Description
Master Mover MT20-800 electric tug
The device is practically new, barely used.
Bzrwmc3eo8
Manufacturer’s description:
MasterTug MT800+ is designed to allow a single operator to manually operate the machine. The operator can easily push, pull and steer wheel loads up to 8,000 kg. As part of the MasterTug series, the tug is equipped with a safe, durable, replaceable battery and a display that shows the charge level. The tug’s steel chassis is FEA tested and the hydraulic mass transfer ...
4
Test device for extension cables
Due8ae
-Socket tester
-Test device for: extension cables, table sockets
-Weight: 30 kg
2
The pneumatic nutrunner was few times used for demonstration to end customers. Max 1750Nm
Ps0jp
14
Robust SPERO diamond drill on a tripod with a power of 2400Watt.
Ideally suited drill for drilling in stone, concrete, ytong, reinforced concrete, asphalt, etc.
This diamond drill is equipped with 1 gear, slip clutches, water connection, integrated leveling system, anchor set and PRCD earth leakage switch.
Brand: SPERO
Item number: SPB2001
Bnegiu2pzl
Power: 2400Watt - 230Volt
Speed: 1 gear: 600 rpm
Drill capacity: 250mm
Connection: R1 / 2 "& 1 1/4 UNC
Suitable for: dry and wet use
Tripod: 9...
7
connected load frequency 230 V
Bogygtv83i
output 0,625 KW
sheet thickness - max. 1,8 mm
battery 2 x 18Volt / 2.0AH V
weight 2,7 kg
range L-W-H 430 x 280 x 100 mm
3
18V DC - Makita battery system
120kN 16-400mm²
without battery
(more available)
Byz8nmr3y8
5
Robotic soldering for every factory.
Simple, yet high-performance. High-performance, yet low-cost.
Three core modules for robotic soldering “soldering head”, “controller”, and “feeder” are all in set. Due to high flexibility, USP5 is the best for Index, cell, inline or any production process.
We offer technical support for systems integrators and manufacturers.
Controller
Soldering unit
Vaccum Cleaner
Botpzstm
Feeder
3
Angle drill, hand drill, corner drill
-for: working in hard-to-reach places
-Screw diameter
-Screw diameter: max. 6 mm
-Bore spindle thread: 12.7mm (1/2")
-Battery voltage: 7.2 V
-Weight including battery: approx. 1.20 kg
-Idle speed: 0 - 750 min-1
3qr2pzpb
-Bore diameter aluminum: max. 10 mm
-Drilling diameter wood: max. 15 mm
-Bore diameter steel: max. 10 mm
-Weight: 4 kg
3
MX-EC 45 TS 1" 450 - 4.500 Nm
The Hydraulic torque wrench was few times used for demonstration to end customers.
Ps0ir
1
Melting Chamber dimensions
Length: 240 mm
Width: 200 mm
Ivk0emd38
Depth: 40 mm
Soldering capacity: 16 kg
Power: 2400 W
for mains voltage: 220 V
2
connected load frequency 230 V
output 0,625 KW
Xsbtigaf
sheet thickness - max. 4,0 mm
weight 5,7 kg
range L-W-H 430 x 350 x 100 mm
1
Hi, I have to sell table cleaning device for laser punching machines
Device manufactured by Trumpf
Device in working order
Price net + vat 23%
Bynsypb3nl
I issue an invoice
6
max load 36to, max workpiece dia 2.500mm, 0,01 - 1 rpm (in 30 steps), welding speed 10 - 150 cm/min (in 14 steps), LxWxH, ca. 2x2x2m
Bv99hqdwea
3
Compulsory mixer, agitator, mixer, mixing tool, stirrer
-Nominal consumption: 1050 watts
Libzh
-Connection: 230 volts
-Speed: 230 rpm
-Dimensions: 1000/520/H130 mm
-Weight: 10 kg
4
Capacity Ø 32 mm in Steel, Ø 70 in Wood
Motor 230V 1800 W, Spindle cone MT-3
Yltyg
3-Step-Gear, 0 - 170 / 0 - 320 / 0 - 470 rpm
with Extra Handle, weight ca. 7,8 kg
Exhibition Unit, unused
2
for screws: M 8 - M 16
2pba3y
maximum tightening torque: 140 NM
Tool holder, square: 1/2 "
Electr. Connection: 220 V, 280 W
Weight: 3.3 kg
4
connected load frequency 230 V
Sud8uc
output 0,625 KW
sheet thickness - max. 3,0 mm
weight 5,1 kg
range L-W-H 430 x 350 x 100 mm
14
The following item is for sale:
- Our offer number: 20/113
- accumulator ear cuff pliers pointed pliers
- Manufacturer: Oetiker
- Type: CP01
- Serial number:565002EX10
- Power :Battery 9,6V 2A
- Dimensions: 410x56x80 mm
- Clamping force range 1000-4200N
- With force gauge SKM01
- With instruction manual
- With Klauke charger
- With case
- Weight :all together 6 Kg Weight device 2050g
Boxgj8lsjs
- Suitable for ear clamps
- optical condition according to photos
- Used very well maintained
- functi...
6
2 columns with 35tons load/each, swing dia, ca. 4.000mm, height adjustment 2.000mm (hydraulic operated), space required: LxWxH, ca. 10x4x7m (mounted overfloor), weight, ca. 35to
K2camvxr
5
Compulsory mixer, agitator, mixer, mixing tool, stirrer
-Nominal consumption: 1400 watts
-Connection: 230 volts
-Speed: 150-470 rpm
-Dimensions: 920/450/H220 mm
-Weight: 8 kg
Qlmbjwrbd
9
Torque tester Desoutter Delta 4000 / 5000
Version 2.1
Cwddlmtm
The device is offered complete with accessories.
Operating instructions
Self collection or forwarding agency. We will be happy to help you organise an inexpensive forwarding agent.
You are welcome to come by for an inspection.
You will receive a proper invoice.
For foreign customers, a net invoice can also be created. Prerequisite is a valid Ust.Indent.Nr.
Subject to prior sale.
Company names and trademarks are the property of thei...
1
for keyway width: 13-30 mm
for Groove depth: 22-35 mm
Milling cutter speed approx.: 1200 RPM
Drive motor: AC 220 V, 1020 W
Weight: approx. 6 kg
Hdal8sybg
8
connected load frequency 230 V
output 1,2 KW
taper diameter 19mm mm
Omhql
turning speeds 1000 - 3000 U/min
roll surface width max. 100 mm
roll length max. 120 mm
weight 2,8 kg
range L-W-H 430 x 280 x 100 mm
The following item is for sale:
- Our offer number: 36/113
- rod screwdriver electrical assembly systems
- Manufacturer: Desoutter
- Type: ECD 120
- Serial number: 14B78796
- Year of manufacture :2014
- Speed :400 1/min
- Dimensions :488 mm
- Weight :4,7 kg
- Torque from 40-120Nm
- Drive 1/2 "
Boxfvmkodn
- Attachment part : Ekatec 1010308 Nr 819015-1
- 6 cant diameter 8 mm
- with control cable
- optical condition according to photos
- Used (very well maintained little used mint condition )
- fun...
3
We sell our Mapress Geberit ECO 301 pipe press with the following jaws.
Jaws for DA42mm, DA54mm and 88,9mm
Bsnc7qgsql
We also have various fittings in stock which are for sale.
3
Nibbling machine, nibbler, nibbler, tin snips, circular shears
-Power: 900 watts
-Max. Cutting capacity: 3.25 mm
-Dimensions: 500/220/H230 mm
-Weight: 5.5 kg
Hih0nh2dc
2
Flat chisel
Bvp3mf0o3o
for Krupp HM 580/Atlas Copco
400,00 € net per piece
7
BGA, SMD rework station
For SMD , BGA soldering repairing
Bj0j8ee0ua
Not have adjusting panel
3
0 30 mm
internal diameter 10 mm
0 max. 17 bar
Omhpn
weight 16 kg
dimensions 500 x 270 x 470 mm
Supply plug 400 volt 32A, 5 pin, 6h
2 x 400 volts 16A, 5 poles, 6h
1 x 400 volt 32A, 5 pin
4 x 230 volts, 16A, 3 poles
Complete with circuit breakers and earth leakage circuit breaker.
The following article is for sale:
On8s2
- Our offer number: 35/113
- Control unit Controller Electrical mounting systems
- Manufacturer: Desoutter
- Type: CVIC 2 H4
- Serial number: 05091357512
- Year of construction : 14.11.2013
- Power :4,5 Kw 230V 50Hz
- Dimensions: H 270 x D 280 x W 130 mm
- Weight : 6 Kg
- optical condition according to photos
- Used very well maintained little used new condition
- functional
- Shipping Germany-wide 7,90€
You will find the suitable rod screwdriver in anoth...
4
For sale is a propeller agitator from EKATO agitator. It is the model EM040.
Data on the agitator:
RpM: 1420
V: 220 /380
kW: 1,5
shaft length: 1800mm
Total length: 2630mm
blade diameter: 260mm
Bp7cxgzdfy
Connection: DN300
For further information see type plate
4
Impact wrenches, universal wrenches, screwdrivers
Ckipwrsw
-Nominal consumption: 600 watts
-Connection: 230 volts
-Recording: 3/4" inches
-Dimensions: 450/450/H200 mm
-Weight: 14 kg
1
gebr. Electric screwdriver make fine
Model ACE 648-1
Right link turn
Voltage 220 volts
Steel bolt 10 mm
Speed:
Kycox
polluted 250 RPM
Idle speed 600 rpm
Power consumption 400 Watt
Chuck Allen 11 mm
Weight approx. 3,4 kg
2
Desoutter Screwdriver shut off SLB050-A1000-S4Q-NE
Demonstration tool ; control unit & power cabel included (230V)
(the tool stand is not included)
Free speed:
V1: 1000 rpm
V2: 750 rpm
Torque Range: 17.40 in.lb till 43.40 in.lb
Output drive: 1/4" in
Length: 11.1 in.
Weight : 1.76 lb.
Memkt
4
Electronic test equipment
With this plant, machinery and equipment can be checked 5,5 KW up to 56 KW.
Electrical units
5.5 KW
11KW
18KW
Zuxlsp87
36KW
56 KW
VB: € 6,000
4
1 well preserved test panel for wall mounting
outer dimensions 800 x 800 mm
function as shown
Bq9jm2wao3
3
For sale is a propeller agitator from Erwin Stelzer Warburg. It is the model DRX3204D.
Data on the agitator:
RpM: 1435
V: 220 / 380
kW: 2,2
shaft length: 500mm
blade diameter: 280mm
Connection: DN250
For further information see type plate
Osart
4
Pipe saber saw, pipe jigsaw, beam jigsaw, saber saw, foxtail
Vqlp8q
-Nominal consumption: 750 W
-Stroke length: 60 mm
-Max. Material thickness
-Pipes up to: max. Ø 300 mm
-div. Saw blades
-Weight: 5 kg
1
gebr. Electric screwdriver make fine
Model SCu 7-9 right link turn
Voltage 220 volts
Steel bolt 8 mm
Kycqt
Speed:
loaded stepless 0-600 rpm
Idle 0-900 RPM
Power consumption 400 Watt
Weight approx. 1.6 kg
2
Desoutter Battery Angle Screwdriver shut off ELS15-480-A
Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included
Free speed: 200 to 480 rpm
Vrdoya
Torque Range: 44,2 in.lb till 133 in.lb
Output drive: Sq. 3/8
Length: 16,5 in.
Weight (without Battery) : 2,6 lb.
4
Plarad Small size Hydraulic Torque Wrench and Tooling in wooden crate
Brtsbs08pm
4
Electric high torque wrench MV-Rad 20K.
Torque range: 200-2000 Nm
Square drive: 1".
Accuracy according to test report: +/- 2%
O7ssh
Torque adjustment easily via the membrane button on the screwdriver. The torque can be adjusted in 1 NM steps from 200 to 2,000 Nm. The reaction arm and the test certificate are included in delivery. Free shipping in AT and DE!
3
For sale is a propeller agitator from Erwin Stelzer Warburg. It is the model SM/62E.D2.
Data on the agitator:
RpM: 985
V: 230 / 400
Eqmz7ou
kW: 0,75
shaft length: 400mm
blade diameter: 220mm
Connection: DN200
For further information see type plate
4
Wiefelstede, Germany
(dealership location)
18341 km