Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Kedpfx Abozw H Hiszonb Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, functionality: fully functional, machine/vehicle number: 71302488218, power: 45 kW (61.18 HP), rotational speed (min.): 1,475 rpm, rotational speed (max.): 1,770 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 330 kg, protection type (IP code): IP55, EMK electric motor, model KQMTG225M-4B3E2K, axle height 225 mm. Kedpfxsz Akrgo Abzjnb

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Knjdszimqropfx Abzjb Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: Kodpfx Absz Dh Rmjzsnb EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): Ksdpfx Aszuuimjbzonb * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Kodpfx Aozuukqebzenb Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 122,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Kodpjzkwc Iefx Abzjnb

Condition: like new (used), functionality: fully functional, A total of 75 motors Brand - Type - Quantity Leroy Somer - LS63 - 1 Leroy Somer - LS71 - 1 FIR - 6AH3 - 5 Sabiana / FIR - 6AH12 - 1 Sabiana / FIR - 46SKAH5 - 1 Antriebstechnik G Bauknecht - 7543054/103 - 2 VEM motors - K21R71KZH - 1 Leroy Somer - LS112MT - 10 ABB - MT80A19F165-4 - 3 Dynamotor De Coster - ONV-T3 (2) - 3 Dynamotor De Coster - ONV-T6 (2) - 2 Dynamotor De Coster - ON-VT3 (2) - 1 Kedpfxeyz Idmj Abzenb Antriebstechnik G Bauknecht - RF0.25/2-7 - 1 Antriebstechnik G Bauknecht - RFO.25/2-7 - 1 Stork - 4AP90L-2 - 1 - N°004488-2000 - 2 Hanning Elektro-Werke - L7AF6B-143 - 1 Leroy Somer - LS132MW6 - 1 Leroy Somer - N°023871JG011 - 1 Efacec - BF5 112 M44 - 1 ABB - 3GAA131002-ASA - 1 ABB - MT100LBZ8-4/8 - 1 Afacec - BF5 112M44 - 1 - A9INCR0106AH3 - 1 RBL - RBLS17SE - 1 - OFR4745E - 7 AACO - 60.2.130M - 2 RBL - RBL6035E - 3 RBL - RBL4755E - 1 Dynamotor De Coster - OLPBC311 - 1 - RJB365 - 1 ABB - M2VA718-4 - 1 WEG - C56 - 1 VEM motors - K21R80K2 - 1 WEG - GF08143 - 1 Simel - 19/100 - 1 Leroy Somer - LS80LT - 1 AACO - 135.2.750.54T - 1 ATB - 112M/2A-11 - 3 - N°074751CL002 - 1 RBL - RBL 172 T - 1 ABB - 3GAA102001-ADA - 1 Simel - 10/3002 - 1 Simel - 10/3003 - 1

Condition: used, Year of construction: 2018, functionality: fully functional, power: 500 kW (679.81 HP), nominal power: 500 kW (679.81 HP), rotational speed (min.): 1,490 rpm, input voltage: 500 V, input frequency: 50 Hz, input current: 692 A, type of input current: three-phase, overall weight: 2,500 kg, type of cooling: air, protection type (IP code): IP55, ABB AC Motor Construction: IM1001-B3 Standard: IEC60034-1 Knjdpjzt Sc Isfx Abzob Temperature Class: F IP Rating: IP55 Service Class: S1 Power Factor: 0.86 Frequency: 50 Hz

Condition: used, Year of construction: 1993, operating hours: 57,000 h, functionality: fully functional, rotational speed (min.): 1,413 rpm, input voltage: 400 V, Industrial DC Electric Motors 481 kW – IEG / Ansaldo Available: 2 high-power industrial direct current (DC) electric motors, manufactured by IEG Trieste – Ansaldo Industria, designed for heavy-duty industrial applications. The motors have been dismantled from an industrial plant and are in excellent condition, complete with dedicated ventilation systems and control panels. Ideal for the revamping of existing plants, rolling mills, extruders, large fans, hoisting installations, or other industrial high-torque applications. Main technical data: Manufacturer: IEG Trieste – Ansaldo Industria Type: Direct current (DC) motor Power: 481 kW Voltage: 400 V Rated current: 1530 A Speed: 1413 rpm Duty: S1 continuous Excitation: 220 V Year of manufacture: 1993 Operating hours: approx. 57,000 Equipment included: - Dedicated ventilation system - Electrical control and command panels Knsdpfeytgk Ijx Abzeb - Technical documentation available On-site inspection possible

Condition: excellent (used), Large inventory of electric motors Total 4 rows (2 single racks and 1 double rack (as shown in the attached photos)) Knsdpfx Absyz R Egezsb AC and DC motors Mainly 500V motors Reconditioned and new motors For sale as a single lot

Condition: used, Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,776 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, type of input current: three-phase, overall weight: 340 kg, total length: 840 mm, total width: 450 mm, total height: 565 mm, torque: 290 Nm, type of cooling: air, protection type (IP code): IP55, We are offering this used SEVA TEC SEV-225M electric motor, manufactured in 2018. Removed from service in mid-2024. Power: 45 kW Speed (50 Hz): 1,480 rpm Speed (60 Hz): 1,760 rpm Rated voltage (delta): 400 V Rated voltage (star): 690 V Rated current (delta): 66.7 A Rated current (star): 38.5 A Rated voltage (delta) 60 Hz: 460 V Rated voltage (star) 60 Hz: 796 V Knedpfxezw Auco Abzsb Rated current (delta) 60 Hz: 80.1 A Rated current (star) 60 Hz: 46.0 A Frequency: 50/60 Hz Power factor (cos φ): 0.88 Protection class: IP 55 Insulation class: F Duty cycle: S1 PTC sensors: 3 If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), CATALOG NUMBER 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (L/W/H): 120x80x700 mm - Engine dimensions (L/W/H): 550x1050x700 mm - Weight: 630 kg ADVANTAGES – Used engine – Very good condition Net price: 10,900 PLN Net price: 2,590 EUR (based on an exchange rate of 4.2 EUR) Knjdpfx Abozx Scrozeb (Prices may change with significant fluctuations)

Condition: good (used), functionality: fully functional, machine/vehicle number: 5GZ00617, power: 257.42 kW (349.99 HP), fuel type: diesel, number of cylinders: 6, overall weight: 1,905 kg, Product Description Used Truck Engine Manufactured by Caterpillar Model 3306 Configuration Inline 6 cylinder- 4 stroke Displacement 10.5 L Cylinder head material Cast iron Injection Direct injection Knjdpfxeund D Te Abzjb Aspiration Turbo chaarged Weight 1905 KG Power 230-350 hp More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: used, 2 x DETROIT DIESEL – Diesel engine Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81375 ZF gear type: IRM350PL.1 ZF gear numbers: 20008107 ----- Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81377 ZF type: IRM350PL.1 ZF numbers: 20007942 ----- Engine power: 613.7 kW (835 HP) at 2300 rpm Year of manufacture: 1975 Description: Turbocharged-Intercooled Number of cylinders: 12 Bore and stroke: 4.25 in x 5 in (108 mm x 127 mm) Displacement: 852 cu in (13.97 liter) Compression ratio: 17 to 1 Net weight: 5200 lbs (2359 kg) ----- Westerbeke / Mecc Alte generator Westerbeke engine Model: 16.0 / 20.0 BEDA Spec: 50 / 60 HZ 3PH Serial No.: U20246-D904 Knedpjxnbkqjfx Abzjb Generator Brand: Mecc Alte Spa Type: W31-140/4 Kva: 20 Rpm: 1800 Phase: 1 Volt: 120 / 240 Amp: 166.6 / 83.3 Kg: 135 Date: 2000 Hours: 366 Price on request Delivery terms: Delivery time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excl. VAT. Machinehandel De Leeuw bv Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST number: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, Year of construction: 2023, functionality: fully functional, SIEMENS 3-MOT 1CV3282B (2023) The Siemens 1CV3282B is an industrial three-phase asynchronous electric motor from the SIMOTICS SD (Severe Duty) series, featuring a cast-iron frame. It is designed for demanding operating conditions. [1] Its basic specifications are: • Power: 90 kW at 50 Hz (125 HP at 60 Hz) • Speed: 4-pole (approximately 1485 rpm at 50 Hz) • Frame size: 280 M Kodpfszr H U Aex Abzenb • Efficiency: IE3 class (Premium Efficiency) • Degree of protection: IP55 (dust and splash-proof) • Construction: IMB3 (foot-mounted) • Weight: Approximately 670 kg 1LE1503-2DB29-0FB5-Z is the precise order number (MLFB code) for the Siemens (Innomotics) SIMOTICS SD series cast-iron electric motor.

Condition: refurbished (used), Year of construction: 1995, operating hours: 900 h, overall weight: 100,000 kg, torque: 500,000 Nm, 2 Flender helical gear units with drive motors and couplings Kjdpotr Dywefx Abzenb Description: We sell two Flender helical gear units (double shaft drive) if desired with drive motors and couplings (option) Condition: little used, completely overhauled and preserved Lower and upper part in 2 containers Technical data: Total torque: 500,000 Nm Permissible torque drive journal: 333,333 Nm Input speed: 1500 rpm Output speed. 7.5 rpm Rolling bearing: SKF Double-tooth clutch: Flender Zapex Field of application of spur gear units: Container cranes, overhead cranes, slewing gear, casting cranes, birch presses, etc New price of the package: well over €700,000 VAT can be shown, package price

Condition: excellent (used), Year of construction: 2005, Automatic hydraulic press Automax ES5-3000 with a 3000 kN compression force for testing, in excellent condition. Designed for use with cubes up to 200 mm and cylinders with a diameter up to 160 mm and height up to 320 mm. Knodpfx Aoxpcuysbzjb Equipped with an external frame for flexural tests with a capacity of 100 kN. Year of manufacture: 2005.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, number of cylinders: 12, MTU E3042D3, 12V400GS engine Deeply refurbished, repainted. New cylinder sleeves, new pistons, new oil pump etc. Missing only oil pan. Kedjywg Ipopfx Abzjnb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 11 kW (14.96 HP), Fully functional electric motor. Knjdpfx Ajzk Utkjbzeb Previously installed in a surface grinding machine. The shaft runs true (see photo).

Year of construction: 2026, condition: new, functionality: fully functional, Marine Generator set 6 cylinder 100 kva, 123A. made for keel cooling. with DEIF DSE7320 control box and shutdown on low water and oil pressure. 3x400v 50Hz. Brand new. 5 pcs. in stock and renovation kit available. Contact me for drawings with measurements off generator sets or more info. Knsdpfxezyckve Abzsb 4 Cylinder 75 kva, 108A also available!

Condition: like new (used), Engines total 52 units: Knjdpfx Aoy Eghxjbzsb Leroy ISS100LT5; 1 unit ABB M2VA50B-S; 1 unit De Coster ONVT6; 25 units Werhe Kaiser AED3/4C; 1 unit D125; 1 unit LEROY LS11211; 1 unit BAUKNECHT 7587967/K01; 1 unit ABB M2AA160M2; 2 units ALLWEILER 1TZ90011CA134GB42; 2 units Leroy LS80LT; 2 units AACO; 1 unit RBL 473SE; 10 units Leroy LS90ST; 1 unit AEG 11190LY2; 1 unit HANNING L7A-6B-145; 1 unit LEROY LS714; 1 unit

Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Type: CD 225M-2 Knjdpfeyq Sf Sox Abzob New, unused, ex stores stock

Condition: refurbished (used), functionality: fully functional, power: 120 kW (163.15 HP), rotational speed (min.): 381 rpm, input voltage: 400 V, input current: 276 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Kodpfx Abjxhdurjzsnb Type: DMA355M39B Construction: IM1001-B3 Standard: IC 17 Duty class: S1 Input voltage: 400 V Input current: 276 A Field voltage Ufield: 200 V Field current Ifield: 23 A Rated power Pn: 120 kW RPM: 381

Condition: refurbished (used), functionality: fully functional, power: 1,000 kW (1,359.62 HP), rotational speed (min.): 500 rpm, input voltage: 504 V, input current: 2,124 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Kjdpfx Absxg Rbvozjnb Type: DMI400Z Construction: IM1001-B3 Standard: IEC 60034-1 Duty class: S1 Input voltage: 504 V Input current: 2124 A Field voltage Ufield: 330 V Field current Ifield: 36.2 A Power Pn KW: 1000 KW RPM: 500