Used Zippo 1250 for sale (1,649)

Condition: used, Multiplex boards used Hnsdpfx Aol Uvxnsgmsn length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg Hnedpfxowrxqxo Agmen

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Hjdpfxswra Ewj Agmenn gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h Hodpew Hg Nlsfx Agmenn The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: new, neu Bulgarien 140320 € 2652.05 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard Hnjdpfxjyq Stcj Agmon leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning lenght 5.000 mm € 160150,00 turning length6.000 mm € 177240,00

Condition: new, neu Hnodjwiqwfepfx Agmjn Bulgarien 128710 € 2432.62 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length6.000 mm € 165640,00

Year of construction: 2016, condition: used, Cooling unit Frigo Carrier Supra 1250Mt Hnedpfx Agszd D E Aemjn Year of manufacture: 2016 Complete with condensers and 8-meter cooling unit. Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Hnsdpfx Aoy Dgrnegmon Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: new, New "CE". Lenght : mm 1250 Exercise power : Ton 40 Hnedpfohkr A Dex Agmen CNC ESA S 630 Touch 10" 2D Controlled axes No. 4 (Y1-Y2-X-R) Y axis stroke : mm 210 Opening width : mm 415 Backgauge stroke: mm 750 Upper and lower tools included. Motor power: kw 4 Approximate weight: Kg 3500 Dimensions: mm : mm 2.300 x 1800 x 2700 (h).

Condition: new, Heidenhain ROD 426 1250 01-03 rotary encoder. 295 434-86, serial number: 7513448, unused, 100% functional, delivery as per photos. Hnjdpfxey Nqqfs Agmen

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Series D, SN: 41269093, used, minor signs of wear, 100% functional, delivery as shown in photos. Hjdpfex Eqtxex Agmsnn

Condition: new, Heidenhain ROD 320.020 1250 rotary encoder. 538 723-05 serial number 16152709 – unused! Hnodpfsy Nqpnox Agmon

Condition: ready for operation (used), Heidenhain RON 425B.0015-1250 rotary encoder ID: 256 080 73 SN: 6 391 665, used, as good as new, 100% functional, scope of delivery as per photos Hsdpfxsi Eaw He Agmsnn

Condition: new, Heidenhain ROD 320.002 1250 rotary encoder. 244 847-06 Serial number 2688447D – unused! – Hodpfx Agey Nqpbsmjnn

Condition: new, Heidenhain RON 425B.0015-1250 ID: 256 080 73 SN: 5 725 465, unused in opened original packaging, 100% functional, scope of delivery as per photos Hnjdpei Eaw Rofx Agmsn

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Ser D SN: 41269120, used, slight signs of wear, 100% functional, scope of delivery as per photos Hodpfx Agercun Iemenn

Condition: new, Siemens SIVACON 8PS BD2C-1250-EE-KR-EBAL / BD2-1250-KR BVP: 611109 End Feed SN118446, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Hodpfx Aox Eu Ruogmsnn

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-0/WI520LV / 235450 servomotor, serial number: MAC0290-85049 + Heidenhain ROD 1424.003-1250, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Hsdpfx Agex Etyzomonn

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Hjdpfx Agjzdpvgomonn Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, mileage: 432,377 km, power: 207 kW (281.44 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 9,280 kg, maximum load weight: 8,645 kg, overall weight: 18,000 kg, axle configuration: 2 axles, wheelbase: 5,670 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, truck registration, Iveco Eurocargo 4x2 refrigerated box, Carrier Supra 1250, Euro 6 | BÄR tail lift 1500 kg | Leaf-air suspension | Trailer hitch | Multifunction steering wheel, air conditioning, auxiliary heater | Cruise control, radio/CD | Load area dimensions L: 7.50 m, W: 2.45 m, H: 2.30 m | Subject to errors, input mistakes, and prior sale. Hjdpfeyyb Ayex Agmjnn

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. Hnjdpszcax Rofx Agmon 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, machine/vehicle number: 5737, Year of construction: 1991, operating hours: 6,587 h, Erstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Hnjdpfx Ajzcbngjgmon Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle AngabenErstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Hodpfozdf Utjx Agmonn Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, operating hours: 9,982 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, spindle bore: 76 mm, rotational speed (max.): 5,000 rpm, bar diameter (max.): 76 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are not a dealer. More detail photo's are coming soon. We have for sale, this exceptional machine, fully loaded and ex-demo in perfect condition. It is possible to buy machine turn-key: including all tools and clamping devices, postprocessor. Even training is possible. machine is under power and is still operating. You can visit machine under working condition. Any inspection is possible. DMG MORI CTX BETA 1250 TC Gen2 Siemens 840. Main spindle ISM76. Sub spindle . Tailstock machine. Milling head 12.000 rpm B-axis compactmaster2. 5-axis simultaneous machining!! Hodezdck Sopfx Agmsnn Capto C6 – 80 tools chain magazine!! Robot/barfeeder/automation package : +automation interface +Signal light +electrical door +barfeeder inferface +parts catcher +coolant flush mainspindle +coolant flush subspindle Chip conveyer Machine cooler system external ()Tropical package) Oil mist extraction system Coolant spray gun Hydraulic differential clamping pressure 8/20/80 bar coolant supply with filter and cooling unit (biggest tank): +80bar high pressure +filterunit +coolant water chiller a/c +internal coolant +external coolant Measuring/monitoring: 3D Probe Heidenhain Tool probe Heidenhain DMG technology cycles: +Tool sorting cycle +Multitool +Alternating speed +Retraction cycle +5-Axis simultaneous machining +MPC (machine protection control) +Excentric Machining +oval turning +Probing Barfeeder (shortloader). Fusion 360 postprocessor possible Main spindle chuck: Schunk 315 Subspindle chuck: Hainbuch 65 Toolholders: Sandvik/Hoffmann Capto C6 tools Spindle liners different sizes (oem DMG) Original DMG lifting gear. All documentation complete. Max turning length: 1200mm Max. turning diam: 470mm Tool magazine: 80 tools Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Milling spindle speed: 12000 rpm (Best TC ever made, stronger than new CTX450TC). Please feel free to ask any question. Machine is for sale turnkey. Machine is for sale as base machine (without tooling etc).

Year of construction: 1987, condition: good (used), Manufacturer - Cams Shefield Year - 1987 Speed - up to 80 m/min. Width of sheet - 1250 mm Thicknes - up to 6 mm Hedpfxegk Nu Ho Agmonn Coiler capacity - 12 tons